Instruction/ maintenance manual of the product DEGESC24SS DeLonghi
Go to page of 24
IMPORT ANT - PLEASE READ AND FOLLOW ✓ Before beginning, please r ead these instructions completely and carefully . ✓ Do not remove permanently af fixed labels, warnings, or plates from the product. This may void the warranty . ✓ Please observe all local and national codes and ordinances.
2 ✓ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ✓ WHA T TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building.
3 DA T A PLA TE CONVERSION LABEL This appliance is designed and manufactured solely for the cooking of domestic (household) food and in not suitable for any none domestic application and therefor e should not be used in a commercial envir onmement. The appliance guarantee will be void if the appliance is used within a none domestic environnement i.
4 W ARNING! THIS APPLIANCE HAS TO BE INST ALLED BY A QUALIFIED INST ALLER. Improper installation, adjustment, alteration, services, or maintenance can cause injury or pr operty damage. Consult a qualified installer , service agent, or the gas supplier .
5 GENERAL INFORMA TION 1. Installation must conform with local codes or , in the absence of local codes, with the National Fuel Gas Code , ANSI Z223.1-Latest Edition.
(456.5 mm) 5" 57/64 17" 31/32 (150 mm) (185 mm) 7" 9/32 6 installation PROXIMITY TO SIDE CABINETS 1. This range may be installed directly adjacent to existing 36" (914 mm) high base cabinets. Range dimensions: • width: 23” 7/8 (606.
7 A A B (914 mm) 36" 30" min. (762 mm) (457 mm) 18" min. 0" 0" (0 m m ) (0 m m ) 20" min. (500 mm) 1 1 " 13/16 m in . (3 0 0 m m ) 13" max. (330 mm) 0" (0 m m ) 3" min. (76 mm) 13" m ax. (330 mm) (914 mm) 36" 0" (0 m m ) 2 0 " m in .
8 LEVELLING THE RANGE The range is equipped with 4 LEVELLING FEET (supplied in a separate kit) and may be levelled by screwing or unscr ewing the feet (fig. 1.8). It is important to observe the directions of figur es 1.6, 1.7a, 1.7b . + 5/16" + 8 mm + 5/16" + 8 mm 0 mm 0" + 11/16" + 17.
9 gas connection Gas supply line Shutoff valve “open” position To range Explosion Hazard Use a new CSA or UL approved gas supply line. Install a shut-off valve. Securely tighten all gas connec- tions. If connected to LP , have a quali- fied person make sure gas pr es- sure does not exceed 14" water column.
10 PRESSURE REGULA TOR INST ALLA TION LOCK Arrow STEP 1 Mount the 1/2” NPT (conical) male connector to the pressur e r egulator and tighten by using a wr ench.
11 To mains connection To range Range manifold Manifold male pipe fitting Connector Pressure regulator 1/2” G cylindrical (ISO 228-1) male 1/2” G cylindrical (ISO 228-1) female 1/2” NPT (conical) male 1/2” NPT female 1/2” NPT female WARNING: check the right positioning of the gas regulator.
12 Fig. 2.5 5. Leak T esting: IMPORT ANT : Leak testing of the appliance shall be conducted as follows: • After final gas connection is made, turn on manual gas valve and test all connections in gas supply piping and appliance for gas leaks with a soapy water solution.
13 CONVERSION TO LP/PROP ANE GAS Every range is provided with a set of injectors for the various types of gas. Select the injectors to be replaced accor ding to the “INJECTORS T ABLE”. The nozzle diameters, expressed in hundr edths of a millimetre, are marked on the body of each injector .
14 1 2 NATURAL GAS REGULATION LP/PROPANE REGULATION A To set the pressur e regulator (fig. 2.9): 1. Unscrew the r egulator cover; 2. Unscrew the A component, r everse and screw it according to the LP/PROP ANE regulation. Fitting the warming drawer (fig.
15 SETTING THE BURNER MINIMUM When switching from one type of gas to another , the minimum flow rate must also be correct: the flame should not go out even when passing suddenly fr om maximum to minimum flame.
16 electrical connection ELECTRICAL REQUIREMENTS • This appliance must be properly installed and gr ounded by a qualified technician in accordance with the National Electrical Code ANSI/NFP A No.70 (latest edition) and local electrical code requir ements.
17 4-Wir e Power Cor d Installation using Strain Relief Supplied (See Figures 3.1 and 3.3) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Scr ews (fig. 3.1). 2. Insert the Power Cord thr ough the Bracket ; then tighten the Power Cord by using the Strain Relief .
18 4-Wir e Power Cor d Installation (See Figures 3.1, 3.4, 3.5 and 3.7) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Scr ews (fig. 3.1). 2. Remove the Bracket and Strain Relief Group by unscr ewing the Bracket Fixing Screws .
19 3-Wir e Conduit Installation (See Figures 3.1, 3.4, 3.8 and 3.9) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Scr ews (fig. 3.1). 2. Remove the Bracket and Strain Relief group by unscr ewing the Bracket Fixing Screws .
20 WIRING DIAGRAM L1 EL 1000 SIEBE ST1 PROBE °C +/- ST2 ST4 ENCODER COOLING FAN ET A OVEN DOOR LA TCH AUX ET A AUX ET A ST3 EL 1000 EL1000 LOCK/UNLOCK RELA Y 3 3 ETA ETA ET A 42 3 4 5 Safety Thermal overload GRILL ELEMENT BOTTOM ELEMENT INT .
21.
22.
23.
Cod. 1102751 - ß4 The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription err ors in the present booklet.
An important point after buying a device DeLonghi DEGESC24SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi DEGESC24SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi DEGESC24SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi DEGESC24SS you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi DEGESC24SS will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi DEGESC24SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi DEGESC24SS.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi DEGESC24SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi DEGESC24SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
