Instruction/ maintenance manual of the product 9146E Air King
Go to page of 2
Figure 1 AS THE SOLE MEANS OF DISCONNECTING POWER WHEN INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE POWER CORD. 6. This fan is intended for general use ONLY. It must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres.
MODEL 4C796E/9146E 2085300A Re v . C (Color) 2/97 2 OPERATION 1. VERTICAL ANGLE: To adjust vertical angle, tilt fan head up or down as desired. 2. SPEED: Speed is controlled by three position rotary switch located on rear of motor housing. 3. POWER SUPPLY CORD: Plug power supply cord into a wall outlet (AC 120 volts, 60 Hz).
An important point after buying a device Air King 9146E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Air King 9146E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Air King 9146E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Air King 9146E you will learn all the available features of the product, as well as information on its operation. The information that you get Air King 9146E will certainly help you make a decision on the purchase.
If you already are a holder of Air King 9146E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Air King 9146E.
However, one of the most important roles played by the user manual is to help in solving problems with Air King 9146E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Air King 9146E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center