Instruction/ maintenance manual of the product SX2210T Dell
Go to page of 43
Dell™SX2210TFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Package Contents Your monitor comes with all the items shown below.
Product Features The SX2210T flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 21.5 inches (546.8 mm) diagonal. ■ 1920X1080resolution,plusfull - screen support for lower resolutions.
Back View Side View Front View Label Description 1- 2 Shortcut keys (for more information, see Operating the Monitor ) *The default settings are Preset Modes select and Brightness/Contrast select .
Bottom View Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor.
Activate the computer and 'wake up' the monitor to gain access to the OSD . ZeropowerconsumptioninOFFmodecanonlybeachievedbydisconnectingthemaincablefromthepoweradapter.
HDMIConnector Pin Number 24 - pin Side of th e C o nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX.
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. USB Upstream Connector USB Downstream Connector USB Por.
System Requirements The following are the minimum system requirements for the Dell Webcam Software Suite: l Intel ® Pentium ® D 3.0 or AMD ® Athlon 64 3200+ or higher l Microsoft ® Win.
Touch Screen Specifications Resolution Specifications Video Supported Modes Preset Display Modes Touch Technology Optical touch Touch Method Finger, stylus or any pointer. Stylus Diameter Minimum 7 mm Capabilities Mouse functionality — click, drag, double - click and right - click Resolution 1073 Mpixel Accuracy +/ - 2.
Electrical Specifications Physical Characteristics Environmental Characteristics Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance Digital DVI - D TMDS, HD.
Maintenance Guidelines Cleaning Your Monitor For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: l To clean your touch screen, use the supplied soft, clean cloth. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Back to Contents Page Appendix Dell™ SX2210T Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the safety information that shipped with your monitor.
Back to Contents Page Setting Up Your Monitor Dell™SX2210TFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Turn On the Monitor Using the Front Panel Controls Using the On - Screen Displa.
Front panel button Use the buttons onthesideofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Accessing the Menu System Exit Use the Exit button to exit on - screen display (OSD) from menu and sub - menus.
The table below provides a list of all the OSD menu options and their functions. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the again.
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
Back Press the button to go back to the main menu. Input Color Format Allows you to set the video input mode to: l RGB : Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter.
Display setting mode submenu Back Press the button to go back to the main menu. Horizontal position Usethe and buttons to adjust image left and right (min 0 ~ max 100). NOTE: When using DVI or HDMI source, the Horizontal Position setting is not available.
Audio Setting mode submenu Line Out Source Select the source of the audio input. Power Save Audio Allows you to turn on or off the power to the audio during the audio power save mode. Default is "On". On — Allows you to turn off the line - out to the sound bar during monitor standby.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color balance etc. Enable (Default): Optimizes the performance of your monitor and provides a better customer experience.
OSD Warning Messages Personalize Allows you to adjust shortcut button for: 1. Brightness & Contrast and 2. Preset Modes. The following warning messages may appear on the screen to indicate that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problem s for more information. Setting the Maximum Resolution To set the maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1920 x 1080. 4.
The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a LED for power indication, and two audio headset jacks. Using the Tilt Tilt With the built - in stand, you can tilt the monitor for the most comfortable viewing angle.
Using the Camera Installing the Dell TouchCam Software (Microsoft ® Windows ® Operating Systems) The Dell SX2210T webcam application media that shipped with your monitor, allows you to install the software and drivers for the integrated webcam. To install the Dell TouchCam Software : You are now ready to use the Webcam.
When a video session ends, the TouchCam software will return to stand - alone mode. Setting up TouchCam in instant messaging programs The following describes the setup procedures for Windows Live Messenger. 1. Click Tool à Audio and video setup... 2.
Similar setup steps can be performed in other IM programs. Installing and Using the Facial Recognition Software (FastAccess) Installing the Facial Recognition Software (FastAccess) (Windows Vista ®.
OK button : This button closes the Console and saves all changes. Cancel button : This button closes the Console without saving any changes. Choosing the Desired Webcam for Face Recognition l Automatic Webcam Selection: Automatic Webcam Selection simplifies operation if more than one webcam is installed on your computer.
The page displays information and provides functions used for touch function technical support. l [Restore factory defaults] button Sets the Touch Screen Tools settings to factory defaults. l [Run diagnostics test] button Runs a diagnostic test on the touch screen and displays the result.
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor Setting the display resolution to 1920 x 1080 (Maximum) For optimal display performance while using the Microsoft ® Windows ® operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps: 1.
Dell™ SX2210T FlatPanelMonitor Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Connecting the Monitor Organizing Your Cables Attaching the Soundbar (Optional) Connecting Your Monitor To connect your monitor to the computer: 1.
Connecting the USB Cable After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. Connect the downstream USB connector (cable supplied) to an appropriate USB connector on your computer.
To attach the soundbar: Back to Contents Page NOTICE: DonotusewithanydeviceotherthantheDellSoundbar. 1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
Back to Contents Page Troubleshooting Dell™ SX2210T Flat Panel Monitor Self - Test Common Problems Product - Specific Problems Universal Serial Bus Specific Problems .
4. Carefully inspect the screen for abnormalities. 5. Press the shortcut key 4 key on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.
Product - Specific Problems Universal Serial Bus (USB) Specific Problems Dell™Soundbar Problems Safety Related Issues Visible signs of smoke or sparks l Do not perform any troubleshooting steps.
Camera Problems Distorted Sound Computer's sound card is used as the audio source l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line - in plug is completely inserted into the jack of the sound card. l Set all Windows volume controls to their midpoints.
D ell TouchCam Problems Restart Windows operating system and ensure the camera is detected correctly by the Windows operating system. Slow frame rate in video capture mode The capture video is not smooth The video capture is a resource intensive task, try adjusting Capture quality to experiment with video capture outputs.
Facial Recognition (FastAccess) problems Installation Daily Use Touch Screen problems Troubleshooting with Touch Screen Tools 3. Click the Finish button to save your changes l AOL Instant Messenger 1.
Calibrating the Touch Screen With a clear desktop on the computer: 1. Run the Touch Screen Tools by clicking its icon in the system tray or Windows Control Panel. 2. Make sure the computer desktop is clear. 3. Click the [Calibrate] button on the Touch Screen Tools.
An important point after buying a device Dell SX2210T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell SX2210T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell SX2210T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell SX2210T you will learn all the available features of the product, as well as information on its operation. The information that you get Dell SX2210T will certainly help you make a decision on the purchase.
If you already are a holder of Dell SX2210T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell SX2210T.
However, one of the most important roles played by the user manual is to help in solving problems with Dell SX2210T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell SX2210T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
