Instruction/ maintenance manual of the product ST2010-BLK Dell
Go to page of 28
Dell™ ST2010 - BLK Flat Panel Monitor User's Guide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™ ST2010 - BLK Flat Panel Monitor User's Guide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
■ 20 - inch ( 444.8*251.1 mm ) viewable area display (Measured diagonally) . ■ 1600 x 900 resolution, plus full - screen support for lower resolutions. ■ Tilt capability. ■ Plug and play capability if supported by your system. ■ On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.
Side View Bottom View 1 Barcode serial number label T o contact Dell for technical support. 2 Security lock slot T o help secure your monitor. 3 Regulatory rating label Lists the regulatory approvals. 4 Dell Soundbar mounting brackets To attach the optional Dell Soundbar.
*[ST2010] color gamut (typical) is based on CIE1976 ( 83% ) and CIE1931 (72%) test standards. Preset display area: 442.8 mm (W) X 249.1 mm (H) Horizontal 442.
Connector type 15 - pin D - subminiature, blue connector 19 - pin HDMI ,black connector Signal cable type Analog: Detachable, D - Sub, 15pins, shipped attached to the monitor Dimensions (with stand) Height 362.3 mm ( 14.27 inches) Width 491.0 mm (19.33 inches) Depth 193.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. .
.
Back to Contents Page Appendix Dell™ST2010 - BLK Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™ST2010 - BLK Flat Panel Monitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ST2010 - BLK Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ST2010 - BLK Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
1.Press tolaunchtheOSDmenuanddisplaythemainmenu. Main Menu for Analog (VGA) Input or Main Menu for HDMI Input 1. Pressthe or button to move between the setting options.
Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and press the button to decrease brightness (min 0 ~ max 100). Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Back Press togobacktothemainmenu. Color Setting Use the Color Settings to adjust the color setting mode and color temperature.
Video Mode WhenyouselectVideo,youcanchooseMovie,Game,Sports,orNaturepreset: l For playing a movie, choose "Movie" preset; l For playing a sport .
Wide Mode Adjusts the image ratio as 1:1, Aspect or full screen. NOTE: WideModeadjustmentisnotrequiredatmaximumpresetresolution1600x900. Horizontal Position Use the or button to adjust image left and right.
Menu Timer OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button. Use the and button to adjust the slider in 5 second increments, from 5 to 60 seconds. Menu Lock Controls user access to adjustments.
Note: This monitor has a built - in diagnostics to automatically calibrate the brightness to compensate for CCFL aging. OSD Warning Messages When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problems for more information. Setting the Maximum Resolution To set the maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1600 x 900.
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Back to Contents Page NOTE: The stand is detached and extended when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™ST2010 - BLK Flat Panel Monitor Setting the display resolution to 1600x900 (maximum ) For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1600x 9000 pixels by performing the following steps: 1.
Dell™ ST2010 - BLK FlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ST2010 - BLK Flat Panel Monitor User's Guide Attaching the Base Connecting the Monitor Attaching the Soundbar (opti.
To connect your monitor to the computer: 1. Turnoffyourcomputeranddisconnectthepowercable. 2. Connecttheblue(analogVGA)displayconnectorcabletothecorrespondingvideoportonthebackofyourcomputer.
Back to Contents Page Troubleshooting Dell™ST2010 - BLK Flat Panel Monitor Self - Test Built - in Diagnostics Common Problems Product Specific Problems Dell Soundbar Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens. The test is complete when the white screen appears. To exit, press the fourth buttonagain. If you do not detect any screen abnormalities upon using the built - in diagnostic tool, the monitor is functioning properly.
Product Specific Problems Dell™Soundbar Problems Back to Contents Page Image retention from a static imageleftonthemonitorfora long period of time Faint shadow fr.
An important point after buying a device Dell ST2010-BLK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell ST2010-BLK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell ST2010-BLK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell ST2010-BLK you will learn all the available features of the product, as well as information on its operation. The information that you get Dell ST2010-BLK will certainly help you make a decision on the purchase.
If you already are a holder of Dell ST2010-BLK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell ST2010-BLK.
However, one of the most important roles played by the user manual is to help in solving problems with Dell ST2010-BLK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell ST2010-BLK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
