Instruction/ maintenance manual of the product SP2008WFPF Dell
Go to page of 31
Dell™SP2008WFPFlatPanelMonitor Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2007DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™SP2008WFPFlatPanelMonitor Front View Back View Bottom View Side View Monitor Specifications Cleaning Your Monitor Front View Back View 1. Video input select 2.
Bottom View NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor. Side View 1 VESA mounting holes (100mm) (Behind attached base plate) Use to mount the monitor. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
Monitor Specifications Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorautomaticallyreducesitspowerconsumptionwhennotinuse.
The following table shows pin assignments in the D - Sub connector: 24 - pin Digital - only DVI Connector NOTE: Pin 1 is at the top right. The following table shows pin assignments in the DVI connecto.
l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Plug and Play Capability You can install the monitor in any Plug and Play - compatible system.
Available USB 1.1 port or a USB 1.1 hub with external power supply (USB 2.0 required for maximum frame rate and resolution) CD - ROM/DVD - ROM drive for software installation Monitor Resolution Horizo.
Cleaning Your Monitor l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Back to Contents Page Appendix Dell™SP2008WFPFlatPanelMonitor Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™SP2008WFPFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™SP2008WFPFlatPanelMonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Setting Up Your Monitor Dell™SP2008WFPFlatPanelMonitor Important instructions to set the display resolution to 1680X1050 (Optimal) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1680 x 1050 pixels by performing the following steps: 1.
Dell™SP2008WFPFlatPanelMonitor Information in this document is subject to change without notice. © 2007DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Back to Contents Page Setting Up Your Monitor Dell™SP2008WFPFlatPanelMonitor Connecting Your Monitor Installing the Webcam Application Using the Front Panel .
Installing the Webcam Application (Microsoft ® Windows ® Operating Systems) The setup.exe application tool launcher provided in the CD allows you to the install Webcam Application on the computer. You are now ready to use the Webcam. The Webcam application provides the following functions.
Using the OSD Menu 1. Press the Menu button to open the OSD menu and display the main menu. or OSD menu / select The Menu button is used to open and exit the on - screen display (OSD), and exit from menus and sub - menus. See Using the OSD Menu .
2. Press the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete list of all the options available for the monitor. 3. PresstheMenubuttononcetoactivatethehighlightedoption.
Exit Select to exit the Main menu. Brightness/ Contrast Brightness adjusts the luminance of the backlight. Adjust Brightness first, then adjust Contrast only if further adjustment is necessary. Push the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100).
Sharpness Scaling Ratio The Sharpness adjustment allow you to improve the sharpness of texts.
.
NOTE: Optimized color settings such as Theatre, Sports and Nature presets are unavailable when you disable Color Management selection.
NOTE: You can also lock or unlock the OSD by pressing and holding the Menu button for 15 seconds. Language Select to have the OSD display in one of the five languages (English, Spanish, French, German, or Japanese). NOTE: The change only affects the OSD.
Factory Reset: ResettheOSDmenuoptionstothefactorypresetvalues. Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options. Positionsettingsonly — Change the settings for Image Position back to original factory settings.
OSD Warning Messages One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Using the Dell Soundbar (Optional) The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
Back to Contents Page Solving Problems Dell™SP2008WFPFlatPanelMonitor Troubleshooting Your Monitor General Problems Product Specific Problems USB Problems.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications fortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.
Product Specific Problemss USB Problems Troubleshooting Your Soundbar NOTE: Image Burn - in is not covered by your warranty. Camera / MIC Problems Camera / MIC not working l Ensure the USB upstream cable is connected to the PC. l Install the Camera / MIC driver provided in the CD.
Back to Contents Page.
Back to Contents Page Using Your Monitor Stand Dell™SP2008WFPFlatPanelMonitor Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Fit the groove on the monitor to the two tabs on the stand.
Removing the Stand 1. Press the stand release button. 2. Lift the stand away from the monitor while pressing the stand release button. Back to Contents Page NOTE: Stand is detached when the monitor is shipped from the factory. NOTE: After placing the monitor panel on a soft cloth or cushion, complete the following step to remove the stand.
An important point after buying a device Dell SP2008WFPF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell SP2008WFPF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell SP2008WFPF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell SP2008WFPF you will learn all the available features of the product, as well as information on its operation. The information that you get Dell SP2008WFPF will certainly help you make a decision on the purchase.
If you already are a holder of Dell SP2008WFPF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell SP2008WFPF.
However, one of the most important roles played by the user manual is to help in solving problems with Dell SP2008WFPF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell SP2008WFPF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
