Instruction/ maintenance manual of the product SP190SFP Dell
Go to page of 33
Dell™SP1908FPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2006 - 2007DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™SP1908FPFlatPanelMonitorUser'sGuide Front View Back View Bottom View Side View Monitor Specifications Cleaning Your Monitor Front View Back View 1.
Bottom View NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor. Side View 1 VESA mounting holes (100mm) (Behind attached base plate) Use to mount the monitor. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
Monitor Specifications Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorautomaticallyreducesitspowerconsumptionwhennotinuse.
24 - pin Digital - only DVI Connector NOTE: Pin 1 is at the top right. The following table shows pin assignments in the DVI connector: Universal Serial Bus (USB) Interface USB ports: l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Plug and Play Capability You can install the monitor in any Plug and Play - compatible system.
Screen type Active matrix - TFT LCD Screen dimensions 19 inches (19 - inch viewable image size) Preset display area: Horizontal 380 mm (14.96 inches) Vertical 300 mm (11.
Cleaning Your Monitor l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Back to Contents Page.
Back to Contents Page Appendix Dell™SE198WFPFlatPanelMonitorUser'sGuide FCC Notice (U.S. Only) CAUTION: Safety Instruction Contacting Dell Your Monitor Set - up Guide FCC Notice (U.
where people could trip over it. l Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket. l Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered.
Customer Service toll - free: 1300 - 662 - 196 Austria (Vienna) International Access Code: 900 Country Code: 43 City Code: 1 Online Support support.
Country Code: 86 City Code: 592 Technical Support E - mail support.dell.com.cn/email Customer Service E - mail customer_cn@dell.
International Access Code: 00 Country Code: 33 City Codes: (1) (4) Home and Small Business Technical Support 0825 387 270 Customer Service 0825 823 833 Switchbo.
Phone Numbers 080 - 25068066 or toll - free:1 - 800 - 425 - 2066 Customer Service Home and Small Business India_care_HSB@dell.com toll - free: 1800 - 4254051 Large Corporate Accounts India_care_REL@dell.
Korea (Seoul) International Access Code: 001 Country Code: 82 City Code: 2 Online Support support.ap.dell.com Technical Support for XPS computers only toll - free:08.
Switchboard 671 16800 Fax Switchboard 671 16865 Panama Online Support www.dell.com/pa la - techsupport@dell.com Technical Support, Customer Service, Sales 001 - 800 - 507 - 1264 Peru Online Support www.
Country Code: 34 City Code: 91 Customer Service 902 118 540 Sales 902 118 541 Switchboard 902 118 541 Fax 902 118 539 Corporate Technical Support.
Your Monitor Set - up Guide To view PDF files (files with an extension of .pdf ), click the document title. To save PDF files (files with an extension of .
Back to Contents Page Setting Up Your Monitor Dell™SP1908FPFlatPanelMonitorUser'sGuide Connecting Your Monitor Using the Front Panel Using the OSD Men.
Using the Front Panel Usethebuttonsonthefrontofthemonitortoadjusttheimagesettings. The following table describes the front panel buttons: Video input select Use the Input Select button to choose between two different video signals that may be connected to your monitor.
Using the OSD Menu 1. Push the Menu button to open the OSD menu and display the main menu. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. Power Button and Indicator Usethepowerbuttontoturnthemonitoronandoff.
2. Push the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete list of all the options available for the monitor. 3. PushtheMenubuttononcetoactivatethehighlightedoption.
NOTE: When using DVI source, the Positioning option is not available. Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Select to activate automatic setup and adjustment.
Red Preset User Preset (photograph image editing, multimedia, movies, etc.). l User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from 0 to 100.
Factory Reset: ResettheOSDmenuoptionstothefactorypresetvalues. Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options. Positionsettingsonly — Change the settings for Image Position back to original factory settings.
OSD Warning Messages One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Using the Dell Soundbar (Optional) The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
Back to Contents Page Solving Problems Dell™SP1908FPFlatPanelMonitorUser'sGuide Troubleshooting Your Monitor General Problems Product Specific Problem.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications fortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.
Product Specific Problemss USB Problems Troubleshooting Your Soundbar NOTE: Image Burn - in is not covered by your warranty. SPECIFIC SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS Screen image is too small Image is centered on screen, but does not fill entire viewing area.
Back to Contents Page.
Back to Contents Page Using Your Adjustable Monitor Stand Dell™SP1908FPFlatPanelMonitorUser'sGuide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1.
Removing the Stand 1. Press the stand release button. 2. Lift the stand up and away from the monitor. Back to Contents Page NOTE: Stand is detached when the monitor is shipped from the factory. NOTE: After placing the monitor panel on a soft cloth or cushion, complete the following step to remove the stand.
An important point after buying a device Dell SP190SFP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell SP190SFP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell SP190SFP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell SP190SFP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell SP190SFP will certainly help you make a decision on the purchase.
If you already are a holder of Dell SP190SFP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell SP190SFP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell SP190SFP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell SP190SFP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
