Instruction/ maintenance manual of the product SC100 Dell
Go to page of 10
Dell Storage Center SC100 and SC120 Expansion Enclosure Getting Started Guide Regulatory Model: E03J, E04J Regulatory Type: E03J001, E04J001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Before You Begin Consider the following best practices before setting up your SC100/SC120 expansion enclosure. • Before connecting any cables between the storage system and expansion enclosure, physically label each port and connector. • Always follow proper power-up and power-down procedures when cycling power across the network.
Figure 1. SC100/SC120 Expansion Enclosure Components 1. Documentation 2. Expansion enclosure 3. Rack rails 4. Front bezel Installing the Expansion Enclosure in a Rack Install the SC100/SC120 expansion enclosure in a rack.
For more information about installing the expansion enclosure, see the Dell Storage Center SCv2000/SCv2020 Storage System Deployment Guide . Installing the Front Bezel Install the bezel on the front of the expansion enclosure. 1. Hook the right end of the bezel onto the expansion enclosure.
Figure 4. Cabling an SC100/SC120 Expansion Enclosure to an SCv2000/SCv2020 Storage System 1. Storage system 2. Storage controller 1 3. Storage controller 2 4. SC100/SC120 expansion enclosure 1 5. SC100/SC120 expansion enclosure 2 Connecting the Power Cables Connect power cables to the expansion enclosure.
Turning on the Expansion Enclosure Turn on the SC100/SC120 expansion enclosure after racking and cabling all of the Storage Center components. Turn on the expansion enclosure by pressing both power switches at the same time.
Enclosure Management Modules (EMMs) EMMs Two hot-swappable IO modules Connectivity Configurations Storage Center supports up to 168 drives in one redundant-path SAS chain • An SCv2000 supports up to.
Power Supplies AC power supply (per power supply) Wattage 700 W Voltage 100–240 VAC (8.6–4.3 A) Heat dissipation SC100 : 191–147 W SC120 : 133–114 W Maximum inrush current Under typical line c.
Environmental Operating 5° to 40°C (41° to 104°F) with a maximum temperature gradation of 10°C per hour NOTE: For altitudes above 2950 feet, the maximum operating temperature is derated 1°F per 550 ft.
An important point after buying a device Dell SC100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell SC100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell SC100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell SC100 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell SC100 will certainly help you make a decision on the purchase.
If you already are a holder of Dell SC100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell SC100.
However, one of the most important roles played by the user manual is to help in solving problems with Dell SC100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell SC100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
