Instruction/ maintenance manual of the product S2409W Dell
Go to page of 31
Dell™S2409WFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2008DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page AboutYourMonitor Dell™S2409WFlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts and C.
Product Features The S2409W flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 24 - inch (609.6 mm) viewable area display. ■ 1920 x 1080 resolution, plus full - screen support for lower resolutions.
Back View Backview.
Bottom view Monitor Specifications Power Management Modes IfyouhaveVESA'sDPMS™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use.
DVIConnector Pin Number 15 - pin Side of the Connected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9 Computer 5V/3.
HDMI Connector Flat Panel Specifications 14 +5V/+3.3V power 15 Selftest 16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 .
* S2409W Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%). Resolution Video Supported Modes Preset Display Modes Electrical Pixel pitch 0.
Physical Characteristics Environmental Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Ex.
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normalandwithincompetitivestandards.Formoreinformation,seeDellSupportsiteat:support.
Back to Contents Page Appendix Dell™S2409WFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Safety Information .
Back to Contents Page Setting Up Your Monitor Dell™S2409WFlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™S2409WFlatPanelMonitor IfyouhaveanonDell™desktop,portablecomputer,orgraphiccard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™S2409WFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Using the On - Screen display (OSD) Menu 1. Push to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input Or Main Menu for non Analog (non VGA) Input If either VGA or DVI - D input is selected and both VGA and DVI - D cables are not connected, a floating dialog box as shown below appears.
2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table fora complete list of all the options available for the monitor. 3. Push the buttononcetoactivatethehighlightedoption.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration.
Input Color Format Mode Selection Preset modes VGA/DVI - D input Standard Multimedia Game Warm Cool Custom (RGB) Video input Movie Game Sports or NOTE: Image modes are different bet.
Nature Hue Saturation Reset Color Settings Back Mode suitable for nature scenes. This feature can make the video image color shift from green to purple. Use this feature to adjust the skin tone. Use or increases the green hue in the image increases the purple hue in the image NOTE : Hue adjustment is only available for video input.
Audio Settings Line Out Source PowerSave Audio Reset Audio Settings Back Selectthesourceoftheaudio Turns the Audio Power on or off during power save mode. Resets the audio settings to the original factory settings. Push to go back to or exit the main menu.
OSD Warning Messages Menu Lock DDC/CI LCD Conditioning Factory Reset Back Controls user access to adjustments. When selected, no user adjustments are allowed.
or This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications fortheHorizontalandVerticalfrequencyrangesaddressablebythis monitor. The recommended mode is 1920 X 1080.
See Solving Problems for more information. Setting the Optimal Resolution To set the optimal resolution for the monitor. 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1920 x 1080.
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Back to Contents Page NOTE: The stand is attached when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™S2409WFlatPanelMonitor Important instructions to set the display resolution to 1920x1080 (Optimal) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps: 1.
Dell™S2409WFlatPanelMonitor Information in this document is subject to change without notice. © 2008 DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™S2409WFlatPanelMonitor User's Guide Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Connecting Your Monitor To connect your monitor to the computer perform the following steps/instructions: 1.
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to neatly organize all cables as shown above.
Back to Contents Page Solving Problems Dell™S2409WFlatPanelMonitorUser'sGuide Self - Test Built - in Diagnostics Common Problems Product Spe.
The following table contains general information about common monitor problems that you might encounter and the possible solutions. Common Symptoms What You Experience Possible Solutions No Video/ Power LED off No picture l Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
Product Specific Problems TroubleshootingtheDell™Soundbar Back to Contents Page SPECIFIC SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS Screen image is too small Image is cente.
An important point after buying a device Dell S2409W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell S2409W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell S2409W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell S2409W you will learn all the available features of the product, as well as information on its operation. The information that you get Dell S2409W will certainly help you make a decision on the purchase.
If you already are a holder of Dell S2409W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell S2409W.
However, one of the most important roles played by the user manual is to help in solving problems with Dell S2409W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell S2409W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center