Instruction/ maintenance manual of the product 8210 3M
Go to page of 5
1 8210 Plus /8210/07048/8110S Particulate Respirator 3M recommended for sanding, grinding, sawing, sweeping and insulating User Instructions (Keep these instructions for reference).
2 This respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or User Instructions , or call 3M in U.S.A., 1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414. IMPORTANT Before use, the wearer must read and understand these User Instructions .
3 7. Dispose of used product in accordance with applicable regulations. Use Limitations 1. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.
4 Fig. 4 Fig. 5 1. Prestretch top and bottom straps before placing respirator on the face (8210 only). 2. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand. 3. Position the respirator under your chin with the nosepiece up.
5 This respirator contains no components made from natural rubber latex. FOR MORE INFORMATION In United States, contact: Internet www.3m.com/occsafety Technical Assistance 1-800-243-4630 For other 3M .
An important point after buying a device 3M 8210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 8210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 8210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 8210 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 8210 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 8210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 8210.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 8210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 8210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
