Instruction/ maintenance manual of the product P2411H Dell
Go to page of 37
Dell™P2411HFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™P2411HFlatPanelMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The Dell™ProfessionalP2411H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ P2411H: 609.7 mm (24 - inch)viewableareadisplay(Measureddiagonally).
Back View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with.
Side View Bottom View 8 Cable management slot Use to organize cables by placing them through the slot. Leftview Right view Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable 2 DC power connector for Dell Soundbar.
*[P2411H] color gamut (typical) is based on CIE1976 (81% ) and CIE1931 (68%) test standards. Screen dimensions 609.7 mm (24 inches viewable image size) Preset display area: 531.36 (H) X 298.89 (V) mm Horizontal 531.36 mm (20.92 inches) Vertical 298.89 mm (11.
Video Supported Modes Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56Hzto75Hz(automatic) Maximum resolution 1920 x 1080 at 60 Hz Model P2411H Video display cap.
Electrical Specifications Model P2411H Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance Digital DVI - D TMDS, 600mV for each differential line, positive p.
Weight with stand assembly and cables 5.8 kg (12.79 lbs) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 3.7 kg (8.
Non - operating Storage: 5% to 90% (non - condensing) Shipping: 5% to 90% (non - condensing) Altitude Operating 4,850 m (15,902 ft) max Non - operating 12,192 m (40,000 ft) max Thermal dissipation 170.
Back to Contents Page Appendix Dell™P2411HFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™P2411HFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™P2411HFlatPanelMonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Properties . 2.
Back to Contents Page Operating the Monitor Dell™P2411HFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input 5 Power (withpowerlight indicator) Use the Power button to turn the monitor on and off.
Brightness / Contrast Use t his menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100).
.
.
.
.
.
AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
INPUT SOURCE Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. Auto S elect Select Auto Select to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector.
When you select Video , you can choose Movie, Game, Sports, or Nature : l Movie : Loads color settings ideal for movies. This is the default preset mode. l Game : Loads color settings ideal for game. l Sports : Loads color settings ideal for sports. l Nature : Loads color settings ideal for nature.
Display Setting submenu for DVI - D input Wide Mode Adjust the image ratio as 4:3 or full screen. Horizontal Position Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+).
.
Back to Contents Page Setting Up Your Monitor Dell™P2411HFlatPanelMonitor Setting the display resolution to 1920 X 1080 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 X 1080 pixels by performing the following steps: In Windows XP: 1.
Dell™P2411HFlatPanelMonitor Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™P2411HFlatPanelMonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing the Cables .
Connecting the Blue VGA Cable Connecting the USB cable After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove.
To remove the stand: 1. Place the monitor on a flat surface. 2. P ress and hold the Stand release button. 3. Lift the stand up and away from the monitor. Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit.
Back to Contents Page Troubleshooting Dell™P2411HFlatPanelMonitorUser'sGuide Troubleshooting Your Monitor Built - in Diagnostics Common Problems .
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Product Specific Problems Universal Serial Bus (USB) Specific Problems Horizontal/Vertical Lines Screen has one or more lines l Reset the monitor to Factory Settings. l Perform Auto Adjust via OSD. l Adjust Phase and Pixel Clock controls via OSD. l Perform monitor self - test feature check and determine if these lines are also in self - test mode.
Dell™Soundbar Problems Back to Contents Page Common Symptoms What You Experience Possible Solutions No Sound No power to Soundbar - the power indicator is off l Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (Blue LED) on the front of the Soundbar is illuminated.
An important point after buying a device Dell P2411H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell P2411H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell P2411H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell P2411H you will learn all the available features of the product, as well as information on its operation. The information that you get Dell P2411H will certainly help you make a decision on the purchase.
If you already are a holder of Dell P2411H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell P2411H.
However, one of the most important roles played by the user manual is to help in solving problems with Dell P2411H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell P2411H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
