Instruction/ maintenance manual of the product P2210T Dell
Go to page of 32
Dell™P2210FlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009 - 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™P2210FlatPanelMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The P2210 flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 22 - inch (558.68 mm) viewable area display (Measured diagonally). ■ 1680 x 1050 resolution, plus full - screen support for lower resolutions.
Back View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power (with power.
Label Card View Side View NOTE: Monitor shipped with label card fully inserted in USB compartment. Pull out the label card to access the barcode serial number label and regulatory rating label. Back View with label card pulled out Front View with label card pulled out Label Description Use 1 Regulatory label Lists the regulatory approvals.
Bottom View Monitor Specifications Flat Panel Specifications Left view R ight view Label Description Use 1 USB downstream ports Connect your USB devices.
*[P2210] color gamut (typical) is based on CIE1976 ( 83% ) and CIE1931 (72%) test standards. Resolution Specifications Supported Video Modes Preset Display Modes Electrical Specifications Screen dimensions 22 inches (22 - inch viewable image size) Preset display area: 473.
Physical Characteristics Environmental Characteristics Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use.
The OSD will only function in the normal operation mode. When any button is pressed in Active - off mode, one of the following messages will be displayed: Activate the computer and the monitor to gain access to the OSD. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
DisplayPort Connector Pin Number 24 - pin Side of th e C o nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
USB P orts l 1 upstream - back l 4 downstream - 2 on back; 2 on left side LCD Monitor Quality and Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability.
Back to Contents Page Appendix Dell™P2210FlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard In Windows XP ® : 1. Right - click on the desktop and click Properties .
Back to Contents Page Operating the Monitor Dell™P2210FlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Using the On - Screen Display (OSD) Menu Accessing the Menu System 1. Push the button to launch the OSD menu and display the main menu. Main Menu for analog (VGA) Input or Main Menu for digital (DVI) Input or Main Menu for display (DP) Input 5 Power (withpowerlight indicator) Use the Power button to turn the monitor on and off.
2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the followingtableforacompletelistofalltheoptionsavailableforthemonitor. 3.
NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration. NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector. Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor.
l Cool : Decreases the color temperature. The screen appears cooler with a blue tint. l Custom (RGB) : Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B) values and create your own preset color mode.
Display Settings Use the Display Settings to adjust image..
Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor Setting the display resolution to 1680 x 1050 ( maximum) For maximum display performance with Microsoft ® Windows ® operating systems, set the display resolution to 1680 x 1050 pixels by performing the following steps: In Windows XP ® : 1.
Dell™P2210FlatPanelMonitor Information in this document is subject to change without notice. © 2009 - 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™P2210FlatPanelMonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing Your Cables .
2. Connect the white (digital DVI - D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back ofyourcomputer.
Connecting the USB cable After you have completed connecting the DVI/VGA /DP cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
To attach the soundbar: Removing the Stand To remove the stand: 1. Place the monitor on a flat surface. 2. P ress and hold the Stand release button. 3. Lift the stand up and away from the monitor. Wall Mounting (Optional) CAUTION: DonotusewithanydeviceotherthantheDellSoundbar.
(Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover.
Back to Contents Page Troubleshooting Dell™P2210FlatPanelMonitorUser'sGuide Self - Test Built - in Diagnostics Common Problems Product Specific.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel, simultaneously for 2 seconds.
Product Specific Problems Universal Serial Bus (USB) Specific Problems Dell™Soundbar Problems l Check for bent or broken pins in the video cable connector. Wrong Color Picture color not good l Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application.
Back to Contents Page l Turn the Power/Volume knob on the Soundbar counter - clockwise to a lower volume setting. l Clean and reseat the audio line - in plug. Unbalanced Sound Output Sound from only one side of Soundbar l Clear any obstructions between the Soundbar and the user.
An important point after buying a device Dell P2210T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell P2210T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell P2210T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell P2210T you will learn all the available features of the product, as well as information on its operation. The information that you get Dell P2210T will certainly help you make a decision on the purchase.
If you already are a holder of Dell P2210T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell P2210T.
However, one of the most important roles played by the user manual is to help in solving problems with Dell P2210T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell P2210T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
