Instruction/ maintenance manual of the product IN2030M Dell
Go to page of 41
Dell™ IN1930/IN2030M Monitor User's Guide Notes, Cautions, Warnings Information in this document is subject to change without notice. © 2011DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™IN1930/IN2030MMonitorUser'sGuide Package Contents Product Features Identifying Parts and Controls .
Product Features The Dell™IN1930/IN2030M flat panel display has an active matrix, Thin - Film Transistor, Liquid Crystal Display. The monitor's features include: ■ IN1930: 47.0 cm (18.5 inches) viewable area display. 1366 x 768 resolution, plus full - screen support for lower resolutions.
Side View Bottom View .
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
15 - pin D - Sub connector DVIConnector Pin Number Monitor Side of the 15 - pin Side Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9.
Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Inrush current 120 V: 30 A (Max.) 240 V: 60 A (Max.) Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: IN1930: IN2030M: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.
Back to Contents Page .
Back to Contents Page Appendix Dell™ IN1930/IN2030M Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com ,enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ IN1930/IN2030M Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Setting.
Front panel Key Use the keys onthefrontofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Accessing the Menu System Front panel Key Description A Up Use the Up key to adjust (increase ranges) items in the OSD menu.
The table below provides a list of all the OSD menu options and their functions. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again.
Brightness Allows you to adjust the brightness or luminance of the backlight. Press the keytoincreasebrightnessandpressthe key to decrease brightness (min 0 ~ max 100). Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen.
Auto Adjust Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self current input: Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
Input Source (for IN2030M only) Use the Input Source menu to select between different video signals that may be connected to your monitor. Auto Select Select Auto Select to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector.
Input Color Format Allows you to set the video input mode to : l RGB : Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter l YPbPr : Select this option if your DVD player supports only YPbPr output .
l Standard : Loads the monitor's default color settings. This is the default preset mode. l Multimedia : Loads color settings ideal for multimedia applications. l Movie : Loads color settings ideal for movies. l Game : Loads color settings ideal for most gaming applications.
Hue Allows you to adjust the skin tone of the image. Use or to adjust the hue from '0' to '100'. Saturation Allows you to adjust the color saturation of the image. Use or to adjust the saturation from '0' to '100'.
Aspect Ratio Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) . Horizontal Position Use the or buttons to adjust image left and right.
Language Allows you to set the OSD display to one of six languages: English, Spanish, French, German, Simplified Chinese, or Japanese. Menu Transparency Allows you to adjust the OSD background from opaque to transparent. Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor.
LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning featuremaytakesometime.
Factory Reset ResetsallOSDsettingstothefactorypresetvalues . Personalize Select this option allows you to set two shortcut keys.
Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source"(for IN2030M only), "Aspect Ratio" and set as shortcut key.
OSD Messages Reset Personalization Allows you to restore shortcut key to the default setting. When the monitor does not support a particular resolution mode you will see the following message:.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontalandverticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M).
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: Windows XP: 1. Right - click on the desktop and select Properties .
2. Select the Settings tab. 3. Set the screen resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M). 4. Click OK . Windows Vista ® or Windows ® 7: 1. Right - click on the desktop and select Personalization . 2. Click Change Display Settings .
Back to Contents Page NOTE: The stand base is detached when the monitor is shipped from the factory..
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor Setting the display resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) ( Maximum) For optimal display per.
Dell™ IN1930/IN2030M monitor Information in this document is subject to change without notice. © 2011 DellInc.Allrightsreserved . Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ IN1930/IN2030M Monitor User's Guide Attaching the Stand Connecting Your Monitor Removing the Stand Attaching the Dell Soundbar (Optional) Attaching the Stand 1.
To connect your monitor to the computer: 1. Turnoffyourcomputeranddisconnectthepowercable. 2. Connect either the white (digital DVI - D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer.
To attach the soundbar: Back to Contents Page CAUTION: DonotusewithanydeviceotherthantheDellSoundbar. 1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
Back to Contents Page Troubleshooting Dell™ IN1930/IN2030M monitor Self - Test Built - in Diagnostics Common Problems Product Specific Problems Dell Soundbar Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
Built - in Diagnostics Your monitor has a built - in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. To run the built - in diagnostics: 1.
Product Specific Problems Dell™Soundbar Problems l Auto Adjust via OSD. l Adjust brightness & contrast controls via OSD. NOTE: When using 'DVI - D', the positioning adjustments are not available. Horizontal/Vertical Lines Screen has one or more lines l Reset the monitor to Factory Settings.
Back to Contents Page as the audio source l Confirm that the audio line - in plug is completely inserted into the jack of the sound card. l Set all Windows volume controls to their midpoints. l Decrease the volume of the audio application. l Turn the Power/Volume knob on the Soundbar counter - clockwise to a lower volume setting.
An important point after buying a device Dell IN2030M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell IN2030M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell IN2030M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell IN2030M you will learn all the available features of the product, as well as information on its operation. The information that you get Dell IN2030M will certainly help you make a decision on the purchase.
If you already are a holder of Dell IN2030M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell IN2030M.
However, one of the most important roles played by the user manual is to help in solving problems with Dell IN2030M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell IN2030M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
