Instruction/ maintenance manual of the product G2410T Dell
Go to page of 33
Dell™G2410HFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™G2410HFlatPanelMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
include: ■ 24 - inch (609.70 mm) viewable area display. 1920 x 1080 resolution, plus full - screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side. ■ Tilt, swivel and vertical extension adjustment capability.
Back View Side View 2 Shortcut Key 1 / Up button 3 Shortcut Key 2 / Down button 4 OSD menu button / OK button 5 Back / Exit button 6 Power button (with power light indicator.
Bottom View Monitor Specifications Flat Panel Specifications * G2410H color gamut (typical) is based on CIE1976 (80%) and CIE1931 (68%) test standards.
Preset Display Modes Electrical Specifications Physical Characteristics Model G2410H Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Support HDCP) Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) 720 x 400 31.
Environmental Characteristics Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use.
DVIConnector Pin Number 15 - pin Side of the Co nnected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9 Computer 5V/3.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™G2410HFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista , Windows 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™G2410HFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™G2410HFlatPanelMonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP ® : 1. Right - click on the desktop and click Properties .
Back to Contents Page Operating the Monitor Dell™G2410HFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input NOTE: IfyouchangethesettingsandtheneitherproceedtoanothermenuorexittheOSDmenu,themonitorautomaticallysavesthosechanges.
Back Press to go back to the main menu. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100). NOTE: Brightness control is not adjustable in Energy Smart Plus and Energy Smart mode.
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Back Press to go back to the main menu. VGA Select VGA input when you are using the analog (VGA) connector. Press to select the VGA input source. DVI - D Select DVI - D input when you are using the Digital (DVI) connector. Press to select the DVI input source.
Back Press to go back to the main menu. Input Color Format Allows you to set the video input mode to. l RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. l YPbPr : Select this option if your DVD player supports only YPbPr output.
Saturation T his feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'. Press to increase the monochrome appearance of the video image Press to increase the colorful appearance of the video image NOTE: Saturation adjustment is available only for video input.
Back Press to go back to the main menu. Horizontal Po sition Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). NOTE: WhenusingaDVIsource,theHorizontalPositionsettingisnotavailable.
Back Press to go back to the main menu. Language Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese, Japanese, or Simplified Chinese). Menu Transparency This function is used to change the OSD background from opaque to transparent.
LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take sometime.
Personalize .
Back to Contents Page Setting Up Your Monitor Dell™G2410HFlatPanelMonitor Setting the display resolution to 1920 X 1080 (maximum) For maximum display performance while using the Microsoft ® Windows ® operating systems, set the display resolution to 1920 X 1080 pixels by performing the following steps: In Windows XP ® : 1.
Dell™G2410HFlatPanelMonitor Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™G2410HFlatPanelMonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing the Cables .
Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove. Attaching the Soundbar (Optional) CAUTION: The graphics are used for the purpose of illustration only.
Removing the Stand To remove the stand: 1. P ress and hold the stand release button. 2. Lift the stand up and away from the monitor . Wall Mounting (Optional) NOTICE: DonotusewithanydeviceotherthanDellSoundbar.
(Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatiblebasemountingkit. 1. Place the monitor panel on a soft cloth or cushion on stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover.
Back to Contents Page Troubleshooting Dell™G2410HFlatPanelMonitorUser'sGuide Troubleshooting Your Monitor Common Problems Product - Specific Proble.
4. Carefully inspect the screen for abnormalities. 5. Press the E button on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.
scrambled or appears torn l Perform Auto Adjust using the OSD. l Adjust Phase and Pixel Clock controls using the OSD. l Perform monitor self - test feature check to determine if scrambled screen appears in self - test mode. l Check for bent or broken pins in the video cable connector.
An important point after buying a device Dell G2410T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell G2410T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell G2410T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell G2410T you will learn all the available features of the product, as well as information on its operation. The information that you get Dell G2410T will certainly help you make a decision on the purchase.
If you already are a holder of Dell G2410T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell G2410T.
However, one of the most important roles played by the user manual is to help in solving problems with Dell G2410T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell G2410T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
