Instruction/ maintenance manual of the product E2311H Dell
Go to page of 33
Dell™E2211H/E2311HmonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E2211H/E2311HmonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The Dell™E2211H/E2311H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ E2211H: 54.52cm(21.5inch)viewableareadisplay(Measureddiagonally).
Back View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with.
Side View Bottom View Right view Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable 2 DVI connector Connect your compute.
*[E2211H] color gamut (typical) is based on CIE1976 (81%) and CIE1931 (68%) test standards. ** [E2311H] color gamut (typical) is based on CIE1976 (81%) and CIE1931 (68%) test standards. Vertical 268.14 mm (10.56 inches) 286.74 mm (11.29 inches) Pixel pitch 0.
Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) 720 x 400 31.5 70.0 28.3 - /+ 640 x 480 31.5 60.0 25.2 -/ - 640 x 480 37.5 75.0 31.5 -/ - 800 x 600 37.9 60.
Physical Characteristics Model E2211H E2311H Connector type 15 - pin D - subminiature, blue connector; DVI - D, white connector 15 - pin D - subminiature, blue connector; DVI - D, white connector .
Environmental Characteristics Model E2211H E2311H Temperature Operating 0°Cto40°C 0°Cto40°C Non - operating Storage: - 20°Cto60°C( - 4°Fto.
IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotinuse.Thisis referred to as Power Save Mode *.
Back to Contents Page Appendix Dell™E2211H/E2311HmonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™E2211H/E2311HmonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Pow.
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input Power (withpowerlight indicator) save mode.
Brightness / Contrast Use t his menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the NOTE: Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated.
.
.
.
AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
The following dialog appears on a black screen as the monitor automatically adjusts to the current input: NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration. NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
l RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. l YPbPr : Select this option if your DVD player supports only YPbPr output. Mode Selection Allows you to set the display mode to: l Graphics : Select this mode if your monitor is connected to your computer.
Press to increase the colorful appearance of the video image NOTE: Saturation adjustment is available only for video input. Reset Color Settings Resets your monitor's color settings to the factory defaults. DISPLAY SETTINGS Use the Display Settings to adjust image.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor Setting the display resolution to 1920 X 1080 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 X 1080 pixels by performing the following steps: In Windows XP: 1.
Dell™E2211H/E2311Hmonitor Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™E2211H/E2311HmonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand To attach the monitor stand: 1.
Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove.
To remove the stand: 1. Place the monitor on a flat surface. 2. Press and hold the Stand release button. 3. Lift the stand up and away from the monitor. Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit.
Back to Contents Page Troubleshooting Dell™E2211H/E2311HmonitorUser'sGuide Troubleshooting Your Monitor Built - in Diagnostics Common Problems Pro.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Product Specific Problems Dell™Soundbar Problems Missing Color Picture missing color l Perform monitor self - test feature check. l Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. l Check for bent or broken pins in the video cable connector.
Back to Contents Page.
An important point after buying a device Dell E2311H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E2311H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E2311H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E2311H you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E2311H will certainly help you make a decision on the purchase.
If you already are a holder of Dell E2311H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E2311H.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E2311H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E2311H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
