Instruction/ maintenance manual of the product E228WFP Dell
Go to page of 37
Dell™E228WFPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2006DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E228WFPFlatPanelMonitorUser'sGuide Front View Back View Bottom View Side View Monitor Specifications LCD Monitor Quality & Pixel Policy Caring for your Monitor Front View Back View 1.
Bottom View Side View Monitor Specifications Power Management Modes 1 VESA mounting holes (100mm) (Behind attached VESA plate) Use to mount the monitor with VESA compliance (100mm) bracket. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use. This is referred to as 'Power Save Mode'*.
Note: Pin 1 is at the top right. Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended.
Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 - /+ VESA, 640 x 480 31.5 60.0 25.2 -/ - VESA, 640 x 480 37.5 75.0 31.5 -/ - VESA, 800 x 600 37.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.
Back to Contents Page Appendix Dell™E228WFPFlatPanelMonitor FCC Identification Information CAUTION: Safety Instruction Contacting Dell FCC Identification Information FCC Notice (U.
l Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway. l Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
City Code: 1 Home/Small Business Support 08 20 24 05 30 17 Preferred Accounts/Corporate Customer Service 08 20 24 05 30 16 Preferred Accounts/Corporate Support 08 20 24 05 30 17 Switchboard 08 20 24 05 30 00 Bahamas Online Support www.
China (Xiamen) Country Code: 86 City Code: 592 Technical Support - Dell™Dimension™andDellInspiron™ toll - free: 800 858 2969 Technical Support - Dell.
France (Paris) (Montpellier) International Access Code: 00 Country Code: 33 City Codes: (1) (4) Technical Support 0825 387 270 Customer Service 0825 823 833 Switchb.
Phone Numbers 080 - 25068066 or toll - free: 1 - 800 - 425 - 2066 Customer Service Home and Small Business India_care_HSB@dell.
Individual User Real Site Sales 044 - 556 - 4649 Switchboard 044 - 556 - 4300 Korea (Seoul) International Access Code: 001 Country Code: 82 City Code: 2 Online Support support.
International Access Code: 00 Country Code: 47 Technical Support 671 16882 Relational Customer Service 671 17575 Home/Small Business Customer Service 23162298 Switchboard 671 16800 Fax Switchboard 671 16865 Panama Online Support www.
City Code: 11 Fax 011 706 0495 Switchboard 011 709 7700 Southeast Asian and Pacific Countries Technical Support, Customer Service, and Sales (Penang, Malaysia) 604 633 4810 Spain (Madrid) International Access Code: 00 Country Code: 34 City Code: 91 Online Support support.
Back to Contents Page City Code: 1344 Central Government 01344 373 193 Local Government & Education 01344 373 199 Health 01344 373 194 Technical Support .
Back to Contents Page Setting Up Your Monitor Dell™E228WFPFlatPanelMonitor If you have a Dell ™ desktop with no internet access 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced .
Back to Contents Page Setting Up Your Monitor Dell™E228WFPFlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™E228WFPFlatPanelMonitor If you have non Dell ™ desktop, portable computer, or graphic card 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced.
Back to Contents Page Setting Up Your Monitor Dell™E228WFPFlatPanelMonitor Important instructions and graphic drivers to set the display resolution to 1680X1050 (Optimal) For opti.
Dell™E228WFPFlatPanelColorMonitor Information in this document is subject to change without notice. © 2006 DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up Your Monitor Dell™E228WFPFlatPanelMonitorUser'sGuide Connecting Your Monitor Using the Front Panel Using the OSD Menu.
A Input select Use the Input Select button to select between two different video signals that may be connected to your monitor. Description of auto - sync detect: If both VGA and DVI cables are connected to one PC, this monitor will display an image automatically just as long as a video signal is present in either VGA or DVI outputs.
Using the OSD Menu 1. Push the MENU button to open the OSD menu and display the main menu. D Auto Adjust Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self - adjusts to the current input: Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock selected. Select No ( - ) to unlock and allow user access to all applicable settings. or NOTE: Auto Adjust, Positioning and Image Settings are only available when you are using the analog (VGA) connector.
NOTE:WhenusingDVIsource,thePositioningoptionisnotavailable. Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.
Color Format Blue Preset Red Preset Normal Preset User Preset Hue Saturation NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input. . l To achieve the different color domain for PC RGB and HD YPbPr ( HD YPbPr is suitable for HD video playback over DVI.
OSD Settings: Horizontal Position Vertical Position OSD Hold Time OSD Lock Adjust the settings for the OSD, including the location and the amount of time the menu remains on - screen.
OSD Warning Messages One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer. See Solving Problems for more information. Setting the Optimal Resolution 1. Right - click on the desktop and select Properties .
Back to Contents Page 1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left until it snaps into the place. 3. Connect the soundbar with the power brick.
Back to Contents Page Solving Problems Dell™E228WFPFlatPanelMonitorUser'sGuide Troubleshooting Your Monitor General Problems Product Specific Problems.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications fortheHorizontalandVerticalfrequencyrangesaddressablebythismonitor.
Product Specific Problems Troubleshooting Your Soundbar Back to Contents Page left on the monitor for a long period of time) displayed appears on the screen when not in use. Alternatively, use a dynamically changing screensaver.
Back to Contents Page Using Your Monitor Stand Dell™E228WFPFlatPanelMonitorUser'sGuide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1.
Removing the Stand After placing the monitor panel on a soft cloth or cushion, press and hold the stand removal button, and then remove the stand. Back to Contents Page NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
An important point after buying a device Dell E228WFP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E228WFP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E228WFP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E228WFP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E228WFP will certainly help you make a decision on the purchase.
If you already are a holder of Dell E228WFP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E228WFP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E228WFP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E228WFP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
