Instruction/ maintenance manual of the product E2210H Dell
Go to page of 30
Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E2010H/E2210H/E2310HFlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Par.
Product Features The Dell™E2010H/E2210H/E2310H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ E2010H: 20 inch (508.0 mm) viewable area display. 1600x900 resolution, plus full - screen support for lower resolutions.
Back View 1. Shortcut Key 1 2. Shortcut Key 2 3. OSD Menu 4. Exit 5. Power On/Off Side View Label Description Use 1 Regulatory rating label List the regulatory approvals. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
Bottom View Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active - off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD .
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Resolution Specifications Electrical Specifications Model number Dell E2010H/E2210H/E2310H Flat Panel Monitor Scan range l Horizontal l Vertical 30 kHz to 83 kHz (automatic) 50 Hz to 75 Hz (automa.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.
Maintenance Guidelines Caring for Your Monitor For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the antistatic coating.
Back to Contents Page Appendix Dell™ E2010H /E2210H/E2310H Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™E2010H/E2210H/E2310HFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1.
Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Me.
Using the On - Screen Display (OSD) Menu Accessing the Menu Syste The table below provides a list of all the OSD menu options and their functions. 1. Press the button to open the OSD menu and display the main menu. Main Menu 2. Press the and buttons to toggle between options in the Menu.
Auto Adjust Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
l Standard : Loads the monitor's default color settings. This is the default preset mode. l Multimedia : Loads color settings ideal for multimedia applications. l Game : Loads color settings ideal for most gaming applications. l Warm : Increase the color temperature.
Back Press to go back to the main menu . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). Vertical Position Use the or buttons to adjust image up and down.
Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds. Menu Lock Controls user access to adjustments. When Lock is selected, no user adjustments are allowed.
OSD Warning Messages Back Press to go back to the main menu. When the monitor does not support a particular resolution mode you will see the following message: E2010H: E2210H/E2310H: This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H).
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Back to Contents Page NOTE: The stand is detached when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor Setting the display resolution to1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H) (Maximum) F.
Dell™ E2010H/E2210H/E2310H FlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Attaching the Stand Connecting Your Monitor Attaching the Del.
Attaching the Dell Soundbar(Optional) To attach the Soundbar: Removing the Stand To remove the stand: 1. P ress and hold the stand release button. 2. Lift the stand up and away from the monitor . CAUTION: The Graphics are used for the purpose of illustration only.
Wall Mounting (Optional) (Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor panel on soft cloth or cushion on stable flat table. 2. Remove the stand 3. Use a screwdriver to remove the four screws securing the plastic cover.
Back to Contents Page Troubleshooting Dell™ E2010H/E2210H/E2310H Flat Panel Monitor Self - Test Common Problems Product Specific Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
A. Ensure that the screen is clean (no dust particles on the surface of the screen). B. Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self - test mode. C. Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds.
Product Specific Problems Back to Contents Page Settings OSD if the Color Management is turned off. l Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
An important point after buying a device Dell E2210H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E2210H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E2210H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E2210H you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E2210H will certainly help you make a decision on the purchase.
If you already are a holder of Dell E2210H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E2210H.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E2210H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E2210H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
