Instruction/ maintenance manual of the product E2013H Dell
Go to page of 51
Dell ™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide Setting the display resolution to 1280 x 1024 (for E1713S) or 1600 x 900 (for E2013H) or 1920 x 1080 (for E2213H/E2313H) (Maximum) Information in this document is subject to change without notice.
Dell ™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide About Your Monitor Setting Up the Monitor Operating the Monitor Troubleshooting Appendix Notes, Cautions, Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.
Back to Contents Page About Your Monitor Dell ™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and.
Drivers and Documentation media Quick Setup Guide Product Information Guide Product Features The Dell ™ E1713S/E2013H/E2213H/E2313H flat panel display has an active matrix, Thin- Film Transistor, Liquid Crystal Display. The monitor's features include: E1713S: 43.
1. Function buttons (For more information, see Operating the Monitor ) 2. Power On/Off button (with LED indicator) Back View Label Description Use 1 VESA mounting holes (100 mm) To mount the monitor. 2 Rating label Power ratings and energy information.
Right Side Bottom View E1713S: E2013H/E2213H/E2313H: Label Description Use 1 Regulatory label Lists the regulatory approvals. 2 AC power connector To connect the monitor power cable. 3 VGA connector To connect your computer to the monitor using a VGA cable.
Normal operation Active Active Active Blue 28 W (Maximum) 19 W(Typical) Active- Off mode Inactive Inactive Blank Amber Less than 0.5 W Switch Off - - - Off Less than 0.
Pin Number Monitor Side of the 15 - pin Side Signal Cable 1 Video -Red 2 Video -Green 3 Video -Blue 4 GND 5 Self- test 6 GND- R 7 GND- G 8 GND- B 9 DDC +5V 10 GND- sync 11 GND 12 DDC data 13 H - sync .
21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer w.
AC input voltage / frequency / current 100 VAC to 240 VAC/50 Hz or 60 Hz + 3 Hz/1.5 A (Max.) Inrush current 120 V: 30 A (Max.) 240 V: 60 A (Max.) Preset Display Modes The following table lists the pre.
VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 900 60.0 60.0 108.
Operating Non- operating 5,000 m (16,400 ft) max 10,668 m (35,000 ft) max 5,000 m (16,400 ft) max 10,668 m (35,000 ft) max 5,000 m (16,400 ft) max 10,668 m (35,000 ft) max 5,000 m (16,400 ft) max 10,668 m (35,000 ft) max Thermal dissipation 85.25 BTU/hour (maximum) 61.
Back to Contents Page Setting Up the Monitor Dell ™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide Attaching the Stand Removing the Monitor Stand for VESA Wall Mount Connecting Your Monitor Attaching the Dell Soundbar (Optional) Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from the factory.
a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place.
After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the monitor stand: 1. Use a long screwdriver to push the release latch located in a hole just above the monitor stand. 2. Once the latch is released, remove the monitor stand away from the monitor.
Connecting the white DVI cable (for E2013H/E2213H/E2313H only) CAUTION: The graphics are used for the purpose of illustration only. Appearance on the computer may vary.
CAUTION: Do not use with any device other than the Dell Soundbar. To attach the soundbar: 1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place.
Back to Contents Page Operating the Monitor Dell ™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Power On the Monitor Press the button to turn On the monitor.
Front panel button Description A Preset modes Use the Preset modes button to choose from a list of preset color modes. See Using the OSD Menu . B Brightness / Contrast Use the Brightness / Contrast button to direct access to the "Brightness" and "Contrast" control menu.
Front panel button Description A Up Use the Up button to adjust (increase ranges) items in the OSD menu. B Down Use the Down button to adjust (decrease ranges) items in the OSD menu. C OK Use the OK button to confirm your selection. D Back Use the Back button to go back to the previous menu.
1. Press the button to open the OSD menu and display the main menu. Main Menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again. 4. Press the and buttons to select the desired parameter.
Brightness Allows you to adjust the brightness or luminance of the backlight. Press the button to increase brightness and press the button to decrease brightness (min 0 ~ max 100). Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen.
.
Auto Adjustment allows the monitor to self- adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display Settings . NOTE : Auto Adjust option is only available when you are using an analog (VGA) connector.
Input Color Format Allows you to set the video input mode to : RGB : Select this option if your monitor is connected to a computer or DVD player using the HDMI to DVI adapter.
YPbPr : Select this option if your DVD player supports only YPbPr output. Preset Modes Allows you to choose from a list of preset color modes..
Standard : Loads the monitor's default color settings. This is the default preset mode. Multimedia : Loads color settings ideal for multimedia applications. Text : Loads color settings ideal for office environment. Warm : Decreases the color temperature.
Aspect Ratio (for E2013H/E2213H/E2313H Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. NOTE : Wide 16:9 adjustment is not required at maximum preset resolution 1600 x 900 (for E2013H) or 1920 x 108.
only) E2213H/E2313H) . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). Vertical Position Use the or buttons to adjust image up and down. Minimum is '0' ( - ).
Language Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Brazilian Portuguese, Russian, Simply Chinese, Japanese.
LCD Conditioning This feature helps reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn- in.
Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source" (for E2013H/E2213H/E2313H only) , "Aspect Ratio" ( for E2013H/E2213H/E2313H only) and set as shortcut Key.
Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source" (for E2013H/E2213H/E2313H only) , "Aspect Ratio" (for E2013H/E2213H/E2313H only) and set as shortcut key.
Reset Personalize Allows you to restore shortcut key to the default setting. OSD Messages When the monitor does not support a particular resolution mode you will see the following message: E1713S: E20.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is 1280 x 1024 (for E1713S) or 1600 x 900 (for E2013H) or 1920 x 1080 (for E2213H/E2313H).
Activate the computer and wake up the monitor to gain access to the OSD . If you press any button other than the power button the following messages will appear depending on the selected input: If VGA or DVI cable is not connected, a floating dialog box as shown below appears.
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: Windows Vista® ,Windows® 7 ,Windows® 8: 1 . For Windows® 8 only, select the Desktop tile to switch to classic desktop. 2 . Right - click on the desktop and click Screen Resolution.
Go to the support site for your computer and download the latest graphic drivers. Go to your graphics card website and download the latest graphic drivers. Using the Dell Soundbar The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays.
NOTE: The stand base is detached when the monitor is shipped from the factory. Back to Contents Page.
Back to Contents Page Troubleshooting Dell™ E1713S/E2013H/E2213H/E2313H monitor Self- Test Built - in Diagnostics Common Problems Product Specific Problems Dell Soundbar Problems WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions .
4 . This box also appears during normal system operation, if the video cable becomes disconnected or damaged. The monitor will enter Power Save Mode after 5 minutes if left at this state. 5 . Turn Off your monitor and reconnect the video cable; then turn On both your computer and the monitor.
To run the built - in diagnostics: 1 . Ensure that the screen is clean (no dust particles on the surface of the screen). 2 . Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self- test mode. 3 . Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Poor Focus Picture is fuzzy, blurry, or ghosting Perform Auto Adjust via OSD. Adjust the Phase and Pixel Clock controls via OSD. Eliminate video extension cables. Reset the monitor to Factory Settings. Change the video resolution to the correct aspect ratio (16:9).
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. Check for bent or broken pins in the video cable connector. Wrong Color Picture color not good Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application.
Distorted Sound Computer's sound card is used as the audio source Clear any obstructions between the Soundbar and the user. Confirm that the audio line - in plug is completely inserted into the jack of the sound card. Set all Windows volume controls to their midpoints.
Back to Contents Page Appendix Dell™ E1713S/E2013H/E2213H/E2313H Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety.
1. Visit support.dell.com . 2. Verify your country or region in the Choose A Country/Region drop - down menu at the bottom of the page. 3. Click Contact Us on the left side of the page. 4. Select the appropriate service or support link based on your need.
Back to Contents Page Setting Up Your Monitor Dell™ E1713S/E2013H/E2213H/E2313H monitor Setting the display resolution to 1280 x 1024 (for E1713S) or 1600 x 900 (for E2013H) or 1920 x 1080 (for E221.
Back to Contents Page Setting Up Your Monitor Dell™ E1713S/E2013H/E2213H/E2313H Monitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://www.dell.com/support/monitors , enter your service tag, and download the latest driver for your graphics 2.
Back to Contents Page Setting Up Your Monitor Dell ™ E1713S/E2013H/E2213H/E2313H monitor If you have a non Dell ™ desktop, portable computer, or graphics card In Windows Vista®, Windows® 7, Windows® 8: 1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.
An important point after buying a device Dell E2013H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E2013H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E2013H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E2013H you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E2013H will certainly help you make a decision on the purchase.
If you already are a holder of Dell E2013H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E2013H.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E2013H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E2013H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
