Instruction/ maintenance manual of the product E2011HC Dell
Go to page of 32
Dell™E2011HMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E2011HMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The Dell™E2011H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ 50.8 cm (20 - inch)viewableareadisplay(Measureddiagonally).
Back View Side View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power bu.
Bottom View Monitor Specifications Flat Panel Specifications Left view Right view Bottom view Label Description Use 1 AC power connector To connect the monitor power cable. 2 VGA connector To connect your computer to the monitor using a VGA cable.
*[E2011H] color gamut (typical) is based on CIE1976 (79 % ) and CIE1931 (68%) test standards. Resolution Specifications Video Supported Modes Preset Display Modes Electrical Specifications Physical Ch.
Environmental Characteristics Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use.
Pin Assignments VGA Connector DVIConnector Pin Number 15 - pin Side of the Co nnected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9 Computer 5V/3.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™E2011HMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™E2011HMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™E2011HMonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™E2011HMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu PowerNap S.
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input Power (withpowerlight indicator) save mode.
Brightness / Contrast Use t his menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the button to decrease brightness (min 0 ~ max 100).
.
.
.
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Press the button to increase contrast and Press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
INPUT SOURCE Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. Auto S elect Select Auto Select to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector.
When you select Video , you can choose Movie, Game, Sports, or Nature : l Movie : Loads color settings ideal for movies. This is the default preset mode. l Game : Loads color settings ideal for games. l Sports : Loads color settings ideal for sports. l Nature : Loads color settings ideal for nature.
Wide Mode Adjust the image ratio as 4:3 or full screen. Horizontal Position Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). NOTE: WhenusingaDVIsource,theHorizontalPositionsettingisnotavailable.
Back to Contents Page Setting Up Your Monitor Dell™E2011HMonitor Setting the display resolution to 1600 X 900 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 X 900 pixels by performing the following steps: In Windows XP: 1.
Dell™E2011HMonitor Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Back to Contents Page Setting Up the Monitor Dell™E2011HMonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand To attach the monitor stand: 1.
Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove. Attaching the Soundbar (Optional) CAUTION: The graphics are used for the purpose of illustration only.
Removing the Stand To remove the stand: To remove the stand: 1. P ress and hold the Stand release button. 2. Lift the stand up and away from the monitor. Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit.
Back to Contents Page Troubleshooting Dell™E2011HMonitorUser'sGuide Troubleshooting Your Monitor Built - in Diagnostics Common Problems Product Sp.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Product Specific Problems Dell™Soundbar Problems l Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Back to Contents Page.
An important point after buying a device Dell E2011HC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E2011HC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E2011HC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E2011HC you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E2011HC will certainly help you make a decision on the purchase.
If you already are a holder of Dell E2011HC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E2011HC.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E2011HC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E2011HC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
