Instruction/ maintenance manual of the product E1911f Dell
Go to page of 34
Dell™ E1911 monitor User's Guide Notes,Cautions,Warnings Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™ E1911 monitor User's Guide Package Contents Your monitor ships with the components shown below.
Product Features The Dell™ E1911 display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 48.26 cm (19 inches) viewable area display. ■ 1440x900 resolution, plus full - screen support for lower resolutions.
Back View Side View Bottom View Label Description 1. Function buttons (For more information, see Operating the Monitor ) 2.
Bottom View Label Description 1 AC power cord connector 2 DVI connector 3 VGA connector Monitor Specifications Flat Panel Specifications *[E1911 ] color gamut (typical) is based on CIE1976 (80% ) and CIE1931 (72%) test standards.
Resolution Specifications Supported Video Modes Model Dell E1911 monitor Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hzto75Hz(automatic) Maximum preset res.
VESA, 1440 x 900 - Analog 55.9 59.9 106.5 - /+ VESA,1440x900(CTV - R) - Digital 55.5 59.9 88.8 +/ - Electrical Specifications Video input signals Analog RGB, 0.
Depth 155.75 mm (6.13 inches) Weight Weight with packaging 5.52 kg (12.17 lbs) Weight with stand assembly and cables 4.59 kg (10.12 lbs) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 3.45 kg (7.60 lbs) Weight of stand assembly 0.
Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotinuse.Thisis referred to as Power Save Mode *.
Back to Contents Page Appendix Dell™ E1911 monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™E1911monitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ E1911 monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ E1911 monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu PowerNap Softwar.
Front panel Key Use the keys onthefrontofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Access.
1. Press the button to open the OSD menu and display the main menu. The table below provides a list of all the OSD menu options and their functions. NOTE: IfyouchangethesettingsandtheneitherproceedtoanothermenuorexittheOSDmenu,themonitorautomaticallysavesthosechanges.
Back Press to go back to the main menu. Brightness Allows you to adjust the brightness or luminance of the backlight. Press the keytoincreasebrightnessandpressthe key to decrease brightness (min 0 ~ max 100).
Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. DVI -D Select DVI - D input when you are using the Digital (DVI) connector.
l Standard : Loads the monitor's default color settings. This is the default preset mode. l Multimedia : Loads color settings ideal for multimedia applications. l Game : Loads color settings ideal for most gaming applications. l Warm : Increases the color temperature.
Back Press to go back to the main menu . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+) . NOTE: When using a DVI source, the Horizontal Position setting is not available.
Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds. Menu Lock Controls user access to adjustments. When Lock is selected, no user adjustments are allowed.
OSD Warning Messages Back Press to go back to the main menu. When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problems for more information. PowerNap Software PowerNap software comes in the CD that comes with the monitor you have just purchased. This software provides 2 options where user can select "Screen dim" or " Sleep" when your PC goes to screen saver mode.
If you do not see 1440 x 900 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures. If you have a Dell desktop or portable computer: ¡ Go to support.dell.com , enter your service tag, and download the latest driver for your graphics card.
Back to Contents Page Setting Up Your Monitor Dell™ E1911 monitor Setting the display resolution to 1440x900 (Maximum) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1440 x 900 pixels by performing the following steps: In Windows XP: 1.
Dell™ E1911 monitor Information in this document is subject to change without notice. © 2010 DellInc.Allrightsreserve Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Back to Contents Page Setting Up the Monitor Dell™ E1911 monitor User's Guide Attaching the Stand Connecting Your Monitor Removing the Stand Base Attachin.
2. Connect either the white (digital DVI - D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer.
Attaching the Dell Soundbar To attach the soundbar: Removing the Stand for VESA Wall Mount To remove stand base from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Press and hold the release latch, while pulling the stand base away from the monitor.
Back to Contents Page To remove the stand assembly from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Remove the three screws on the stand of the monitor as shown above. 3. Remove the stand assembly from the monitor.
Back to Contents Page Troubleshooting Dell™ E1911 monitor Self - Test Common Problems Product Specific Problems Dell Soundbar Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel, simultaneously for 2 seconds.
Product Specific Problems Dell™Soundbar Problems l Auto Adjust via OSD. l Adjust brightness & contrast controls via OSD. Geometric Distortion Screen not centered correctly l Reset the monitor to Factory Settings. l Auto Adjust via OSD.
Back to Contents Page l Test the Soundbar using another audio source (For example: portable CD player, MP3 player). Distorted Sound Computer's sound card is used as the audio source l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line - in plug is completely inserted into the jack of the sound card.
An important point after buying a device Dell E1911f (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E1911f yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E1911f - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E1911f you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E1911f will certainly help you make a decision on the purchase.
If you already are a holder of Dell E1911f, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E1911f.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E1911f. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E1911f along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
