Instruction/ maintenance manual of the product E177FP Dell
Go to page of 29
Dell™E177FPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
Back to Contents Page About Your Monitor Dell™E177FPFlatPanelMonitorUser'sGuide Front View Back View Side View Bottom View Monitor Specifications Caring for your Monitor Fr.
Side View 1 Security lock slot - Attach a lock to secure your monitor. 2 Dell Soundbar mounting brackets - Attach the optional Dell Soundbar. 3 Barcode serial number label - Refer to this label if you need to contact Dell for technical support. 4 Regulatory rating label - List the regulatory approvals.
Right side Left side Bottom View 1 AC power cord connector 2 VGA connector.
Monitor Specifications General Model number E177FP Flat Panel Screen type Active matrix - TFT LCD Screen dimensions 17 inches (17 - inch diagonal viewable image size) Preset display area: Horizontal 337.9 mm (13.3 inches) Vertical 270.3 mm (10.6 inches) Pixel pitch 0.
Power Management Modes If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use.
Pin Assignments VGA Connector The following table shows pin assignments in the VGA connector: Plug and Play Capability You can install the monitor in any Plug and Play - compatible system.
Back to Contents Page Appendix Dell™E177FPFlatPanelMonitorUser'sGuide FCC Notice (U.S. Only) CAUTION: Safety Instruction Contacting Dell Your Monitor Set - up Guide Product Information Guide FCC Notice (U.
l Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway. l Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
Home/Small Business Support for all other Dell computers 0820 240 530 17 Preferred Accounts/Corporate Support 0820 240 530 17 Switchboard 0820 240 530 00 Bahamas Website: www.dell.com.bs E- mail: la - techsupport@dell.
Large Corporate Accounts Key Accounts toll - free: 800 858 2628 Large Corporate Accounts North toll - free: 800 858 2999 Large Corporate Accounts North Government and Education .
International Access Code: 00 Country Code: 49 City Code: 69 Technical Support for XPS 069 9792 - 7222 Technical Support for all other Dell computers 069 9792 - 7200 Ho.
Corporate Technical Support 02 577 826 90 Customer Care 02 577 825 55 Fax 02 575 035 30 Switchboard 02 577 821 Jamaica E- mail: la - techsupport@dell.
Main 50 - 81 - 8800 or 01 - 800 - 888 - 3355 Montserrat E- mail: la - techsupport@dell.com General Support toll - free: 1 - 866 - 278 - 6822 Netherlands Antilles E- mail: la - techsupport@dell.
Transaction Sales toll - free: 1 800 394 7412 Corporate Sales toll - free: 1 800 394 7419 Slovakia (Prague) International Access Code: 00 Country Code: 421 Website: support.euro.dell.com E- mail: czech_dell@dell.
Your Monitor Set - up Guide To view PDF files (files with an extension of .pdf ), click the document title. To save PDF files (files with an extension of .
Back to Contents Page.
Back to Contents Page Using the OSD Dell™E177FPFlatPanelMonitorUser'sGuide Connecting Your Monitor Using the Front Panel Buttons Using the OSD UsingtheDell™Soundbar(Optional) Connecting Your Monitor 1. Turn off your computer and unplug its power cable.
On Screen Menu/Display (OSD) Direct - Access Functions Using the OSD Accessing the Menu System 1. With the menu off, press the 'MENU' button to open the OSD system and display the main features menu. Brightness/Contrast Hot Key B C - and + buttons Use these buttons to adjust (decrease/increase ranges) items in the OSD.
2. Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the function or group of functions (sub - menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock 'adjustment and then use 'Phase' again. NOTE:Thisfunctionmaychangethewidthofthedisplayimage.
Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.
OSD Warning Messages A warning message may appear on the screen indicating that the monitor is out of sync. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Soundbar Attachment to the Monitor Back to Contents Page 2. Power indicator 3. Power/Volume control 1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left until it snaps into place.
Back to Contents Page Product Specific Problems Dell™E177FPFlatPanelMonitorUser'sGuide Monitor Specific Troubleshooting Common Problems Product Specific .
Product Specific Problems l Adjust Phase and Clock controls through OSD l Perform monitor reset l Check environmental factors l Relocate and test in another room Missing Pixels LCD screen has spots l .
Back to Contents Page signal " will appear. No Input Signal when user controls pressed No picture, the LED light is green. When press "+", " - " or "Menu" key, the message " No input signal " will appear.
Back to Contents Page Using Your Monitor Stand DellT E177FP Flat Panel Monitor User's Guide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Place the stand on a flat surface. 2. Fit the groove on the back of the monitor onto the two teeth of the upper stand.
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Removing the Stand After placing the monitor panel on a soft cloth or cushion, press and hold the LCD removal button, and then remove the stand.
An important point after buying a device Dell E177FP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E177FP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E177FP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E177FP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E177FP will certainly help you make a decision on the purchase.
If you already are a holder of Dell E177FP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E177FP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E177FP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E177FP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
