Instruction/ maintenance manual of the product E08J001 Dell
Go to page of 10
Dell PowerVault MD3060e Storage Enclosure Getting Started Guide Regulatory Model: E08J Series Regulatory Type: E08J001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Installation And Configuration CAUTION: Before performing the following procedure, review the safety instructions that came with the system. Unpacking A Rack System WARNING: The weight of your system without the physical disks installed (empty weight) is 19.
Opening And Closing The Disk Drawer Figure 2. Opening and Closing the Disk Drawer Open the disk drawer to install or remove the physical disk carrier(s). NOTE: You can open only one disk drawer at a time. Forcing to open more than one drawer at a time may damage the assembly or produce unexpected results.
Connecting The Power Cable(s) Figure 4. Connecting the Power Cable(s) Connect the system’s power cable(s) to the system. Securing The Power Cable(s) Figure 5. Securing the Power Cable(s) Open the cable retention bracket by pulling the tabs on its sides, insert the cable, and secure the system power cable, as shown in the illustration.
Turning On The System Figure 6. Turning on the System Turn the power switch on the back of the system to the On position. The power LED will turn on. Installing The Bezel Figure 7.
• As a storage enclosure when connected to a Dell PowerEdge server via a Dell qualified Host Bus Adapter (HBA). • When using the MD3060e as a storage enclosure, attached to Dell PowerEdge Server(s.
Power NOTE: This system is also designed to be connected to IT power systems with a phase to phase voltage not exceeding 230 V. Battery 6.6 V DC, 1100 mAh, 7.26 W Lithium Ion Battery Physical Height 177.80 mm (7.0 inch) Width 482.60 mm (19.0 inch) with rack latches Depth 825.
Environmental Operating One shock pulse in the positive z axis (one pulse on each side of the system) of 31 G for 2.6 m in the operational orientation. Storage Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 m.
Environmental NOTE: Applies to data center and non-data center environments. Gaseous Contamination NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity Copper Coupon Corrosion Rate <300 Å/month per Class G1 as defined by ANSI/ ISA71.
An important point after buying a device Dell E08J001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E08J001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E08J001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E08J001 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E08J001 will certainly help you make a decision on the purchase.
If you already are a holder of Dell E08J001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E08J001.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E08J001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E08J001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
