Instruction/ maintenance manual of the product 320-8277 Dell
Go to page of 43
Dell™U2410FlatPanelMonitorUser'sGuide Notes, Caution s, and Warning s Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
Back to Contents Page AboutYourMonitor Dell™U2410FlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts and Controls .
Product Features The U2410 flatpaneldisplayhasanactivematrix,thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 24 - inch ( 518.4 mm x 324 mm) viewable area display measured diagonally.
Back View Front View Control Panel Label Description 1- 3 Shortcut keys *The default settings are Preset Modes Select , Brightness/Contrast Select and Input Source Select .
BackView.
Bottom View Bottom View RightView Left View Label Description 1 Card Reader. See Card Reader Specifications formoreinformation.
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
DVIConnector Composite V ideo Connector 7 GND -G 8 GND -B 9 Computer 5V/3.3V 10 GND - sync 11 GND 12 DDC data 13 H- sync 14 V- sync 15 DDC clock Pin Number 24 - pin Side of the Connected Sign.
Luma composite chroma Component Video Connector DisplayPort Connector Pin Number 3- pin Side of the C onnected Signal Cable (Cable not included) 1 Y (Luminance signal) 2 Pb (Color differen.
HDMI Connector Pin Number 19 - pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2 - 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1 - 7 TMDS DATA 0+ 8 T.
* U2410 Color Gamut (Typical) is based on CIE1976 (110%) and CIE1931 (102%) . Resolution Horizontal scan range 30 kHz to 81 kHz (automatic) Vertical scan range 56 Hz to 76 Hz Maximum resolution 19.
Connector type l VGA: Blue Connector l DVI - D: White Connector l DisplayPort: Black Connector l Composite l Component l HDMI Signal cable type l D- sub: Detachable, Analog, 15pin, shipped attached to.
Universal Serial Bus (USB) Interface USB Upstream C onnector USB Downstream C onnector USB P orts l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Operating 10% to 80% (noncondensing) Non - Operating Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) Altitude Operating 3,657.
Card Reader Specifications Overview l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. l The Flash Memory Card Reader is automatically recognized by Microsoft ® Windows ® 2000, Windows ® XP,Windows ® Vista and Windows ® 7 .
Performance Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™U2410FlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Safety Information .
Back to Contents Page Setting Up Your Monitor Dell™U2410FlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™U2410FlatPanelMonitor If you have non Dell ™ desktop, portable computer, or graphic card 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced .
Back to Contents Page Operating the Monitor Dell™U2410FlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
l HDMI input l Component video input l Composite video input Displays the source selection bar. Touch and buttons to move between the setting options and Touch to select the input source you want.
Using the OSD Menu 1. Touch to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input Or Main Menu for non Analog (non VGA) Input 2. Touch the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted.
6. Touch return to the main menu or to exit the OSD menu. Icon Menu and Submenus Description Brightness/Contrast Brightness Contrast Back Allows you to adjust the brightness and contrast. Brightness adjusts the luminance of the backlight.
Scan Sources VGA DVI - D 1 & 2 DisplayPort HDMI Component Composite Back Scan for Sources, touch to scan for available input signals. Select VGA input when you are using the analog (VGA) connector. Touch to select the VGA input source.
VGA/DVI - D1/ DVD - D2/HDMI/DP input Standard Multimedia Game Warm Cool Adobe RGB sRGB Custom Color Video input Movie Game Nature xvMode Hue Saturation Reset Color Settings Mode suitable for desktop applications. Mode for multimedia applications, eg video playback.
Back Touch to go back to the main menu. Display Settings Wide Mode Horizontal Position Vertical Position Sharpness Noise Reduction Zoom Pixel Clock Phase Dynamic Contrast Display Info Reset Display Settings Back Use the Display Settings to adjust image.
PIP Mode When PIP/PBP activated PIP Source Size Position Contrast Hue Saturation Back or PIP /PBP submenu when PIP/PBP ON (mainsourceisVGA/DVI - Dinpu.
Other Settings Language Menu Transparency Menu Timer Menu Lock Menu Rotation Button Sound PowerSave Audio DDC/CI Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
OSD Warning Messages LCD Conditioning Factory Reset Back If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention.
or or or This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications fortheHorizontalandVerticalfrequencyranges addressable by this monitor. Recommended mode is 1920 X 1200.
See Solving Problems for more information. Setting the Maximum Resolution 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1920 x 1200. 4. Click OK . If you do not see 1920 x 1200 as an option, you may need to update your graphics driver.
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
Stand extends vertically up to 100 mm + 5mm. Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of the monitor.
Adjusting the Rotation Display Settings of Your System After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of Your System. To adjust the Rotation Display Settings: 1. Right - click on the desktop and click Properties .
Back to Contents Page Setting Up Your Monitor Dell™U2410FlatPanelMonitor Important instructions to set the display resolution to 1920 x 1200 (Maximum) For optimal display performa.
Dell™U2410FlatPanelMonitor Information in this document is subject to change without notice. © 2009 - 2011 DellInc.Allrightsreserved. Reproduction of these materails in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™U2410FlatPanelMonitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Attaching the Stand To attach the monitor stand: 1.
Connecting the Blue VGA Cable and USB uplink cable Connecting the Black DisplayPort Cable and USB uplink cable After you have completed connecting the DVI/VGA /DisplayPort cable, follow the procedure below to complete setting up your monitor: l Plugthepowercablesforyourcomputerandmonitorintoanearbyoutlet.
Attaching the Soundbar (Optional) Back to Contents Page 1 Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2 Slide the Soundbar to the left until it snaps into place.
Back to Contents Page Solving Problems Dell™U2410FlatPanelMonitorUser'sGuide Monitor Specific Troubleshooting Built - in Diagnostics Common Problems .
4. Carefully inspect the screen for abnormalities. 5. Press the fourth button on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.
Video Problems Product Specific Problems l Adjust brightness & contrast controls via OSD. NOTE: When using 'DVI - D', the positioning adjustments are not available. Horizontal/Vertical Lines Screen has one or more lines l Reset the monitor to Factory Settings.
Universal Serial Bus (USB) Specific Problems TroubleshootingtheDell™Soundbar power saving mode. press "+", " - " or "Menu" key, the message "NoCompositeinputsignal"or " No Component input signal " will appear.
TroubleshootingtheCardReader Back to Contents Page CAUTION: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media. Problem Cause Solution Drive letter is not assigned.
An important point after buying a device Dell 320-8277 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 320-8277 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 320-8277 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 320-8277 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 320-8277 will certainly help you make a decision on the purchase.
If you already are a holder of Dell 320-8277, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 320-8277.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 320-8277. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 320-8277 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
