Instruction/ maintenance manual of the product 3008WFP Dell
Go to page of 37
Dell™3008WFPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2007 - 2009DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide Product Features The 3008WFP flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 30 - inch (756.
Back View Side View 3 OSDMenu/Select 4 Brightness & Contrast/Down ( - ) 5 Auto - adjust/Up (+) 6 Power button (with power light indicator) Back view Back View with monitor stand Label Description Use 1 VESA mounting holes (100mm) (Behind attached base plate) To mount the monitor.
Bottom View Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cord to wall outlet. 2 DC power connector for Dell Soundbar Connect the power cord for the Soundbar (optional). 3 Audio connectors Connect the HDMI 2.
Pin Assignments VGA Connector DVIConnector Pin Number 15 - pin Side of the Connected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9 +5V 10 DDC - GND 11 GND 12 DDC - SDA 13 H- sync 14 V- sync 15 DDC - SCL NOTE: Pin 1 is at the top left.
20 - pinDisplayPortConnector 19 - pinHDMIConnector 11 T.M.D.S. Data 1/3 Shield 12 T.M.D.S. Data 3 - 13 T.M.D.S. Data 3+ 14 +5V Power 15 Self Test 16 Hot Plug Detect 17 T.M.D.S. Data 0 - 18 T.M.D.S. Data 0+ 19 T.
S- video Connector Composite Video Connector Luma Composite Chroma Component Video Connector 1 T.M.D.S. Data 2 - 2 T.M.D.S. Data 2 Shield 3 T.M.D.S. Data 2+ 4 T.M.D.S. Data 1+ 5 T.M.D.S. Data 1 Shield 6 T.M.D.S. Data 1 - 7 T.
.
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. USB Upstream Connector USB Downstream Connector USB Ports l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side NOTE: This monitor supports High - Speed Certified USB 2.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Cards Type Support Specification Memory Card Spec Version Max. capacity CF xD MS MS PRO MD Duo SD MMC CompactFlash Specification xD Picture Card Specification Memory Stick Standard Format Specificatio.
.
Back to Contents Page Appendix Dell™3008WFPFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Download and install the latest driver for your graphics card from the Dell Support site at: support.
Back to Contents Page Setting Up Your Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Display Properties .
Back to Contents Page Operating the Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for non Analog (non VGA) Input or or B Picture by Picture (PBP) Select UsethisbuttontoactivatePicturebyPicture(PBP)modeadjustment.
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector. 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
Back Push to go back to the main menu. Auto Select Push to scan for available input signals. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. DVI - D1/ DVI - D2 Select DVI - D input when you are using the Digital (DVI) connector.
Color setting submenu for VGA/DVI - D input Color setting submenu for Video Input or VGA/DVI - D input Video input Back Push to go back to the main menu. Input Color Format Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or a DVI cable.
Hue This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use and buttons to adjust the hue from '0' to '100'. makes video image shade into green ish makes video image shade into purplish NOTE: Hue adjustment only available for video input.
Display Reset Reset the image to the original factory setting. Exit Menu Push to exit the OSD main menu. OTHER SETTINGS Back Push to go back to the main menu. Language Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).
Reset Exit Menu Push toexittheOSDmainmenu. PBP SETTINGS This function brings up a window displaying image from another input source.
OSD Warning Messagess NOTE: When using DVI source, the contrast adjustment is not available. Back Push to go back to the main menu. Mode Use and buttonstobrowseand to select Picture by Picture (PBP) "On" or "Off".
See Solving Problems for more information. Setting the Optimal Resolution To set the optimal resolution for the monitor: Windows XP: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1920 x 1200/2560 x 1600.
Using the Dell Soundbar (Optional) The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
Back to Contents Page.
Back to Contents Page Setting Up Your Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide Important instructions to set the display resolution to 1920 x 1200 (VGA input source)/25.
Dell™3008WFPFlatPanelMonitor Information in this document is subject to change without notice. © 2007 - 2009DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™3008WFPFlatPanelMonitorUser'sGuide Connecting the Monitor Organizing Your Cables Attaching the Sound.
After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: l Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
Attaching the Stand Place the s tand on a flat surface and follow these steps to attach the monitor stand: 1. Remove the four screws from the stand. 2. Remove the stand by lifting it straight up and away from the monitor. 1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
Back to Contents Page 2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand and tighten up the bolts as indicated.
Back to Contents Page Solving Problems Dell™3008WFPFlatPanelMonitorUser'sGuide Monitor Specific Troubleshooting Common Problems Video Problems .
Video Problems Product Specific Problems spots l Pixel that is permanently off is a natural defect that can occur in LCD technology. Stuck - on Pixels LCD screen has bright spots l Cycle power on - off. l Pixel that is permanently off is a natural defect that can occur in LCD technology.
Universal Serial Bus (USB) Specific Problems TroubleshootingtheDell™Soundbar Cannot adjust the monitor with the buttons on the front panel OSD does not appear on the screen l Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
TroubleshootingtheCardReader Back to Contents Page l Troubleshoot the computer's sound card. l Test the Soundbar using another audio source (For example: portable CD player, MP3 player). Low Volume Volume is too low l Clear any obstructions between the Soundbar and the user.
An important point after buying a device Dell 3008WFP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 3008WFP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 3008WFP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 3008WFP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 3008WFP will certainly help you make a decision on the purchase.
If you already are a holder of Dell 3008WFP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 3008WFP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 3008WFP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 3008WFP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
