Instruction/ maintenance manual of the product 2330D/DN Dell
Go to page of 181
Dell™2330d/dn and 2350d/dn Laser Printer User's Guide To order ink or supplies from Dell: Double-click the icon on your desktop. 1. Visit the Dell website, or order Dell printer supplies by phone. www.dell.com/supplies For the best service, ensure that you have the Dell printer Service Tag available.
DFARS 252.227-7013 and in applicable FAR provisions: Dell Inc., One Dell Way, Round Rock, Texas, 78682, USA. Model 2330d/dn and 2350d/dn June 2010 SRV HX750 Rev.
Finding Information Finding Information About the Printer What are you looking for? Find it here How to set up my printer Setting Up Your Printer poster Safety information for preparing to operate my .
What are you looking for? Find it here How to identify your printer when you use support.dell.com or contact support How to find the Express Service Code to direct your call when contacting support These labels are located on your printer. The illustration below shows the location of the label on the printer.
About Your Printer Understanding Printer Parts Understanding the Operator Panel Choosing the Right Cable Understanding Printer Parts Part Description 1 Front exit Slot from where the paper exits the printer. 2 Output bin extender Support for the paper as it exits the printer.
9 Multipurpose feeder Tray to manually load various paper types such as envelopes. 10 Multipurpose feeder tray Support for the paper as it is loaded into the multipurpose feeder. 11 Extension tray Additional support for print media other than paper, such as envelopes, to prevent bending or wrinkling.
Part Description 16 USB port Slot into which you plug the USB cable (sold separately). The other end of the USB cable plugs into your computer. Locally attaches printer to the computer. 17 Network port (for network printers only) Slot into which you plug the Ethernet cable (sold separately).
Use the Icon To 1 Display View the number of copies to be printed as well as error codes. 2 Left arrow button Scroll through menus, submenus, or settings on the display. Move to the previous or next option. Each press moves one item in the list or to a different setting for a menu item.
Your printer interconnection cable must meet the following requirements: Connection Cable certification USB USB 2.0 Parallel IEEE-1284 10/100/1000 Ethernet CAT-5E.
Operator Panel Menus Menu List Paper Menu Reports Network/Ports Settings Menu List Admin Menu Paper Menu Reports Network/Ports Settings From the menu list, use the Arrow buttons to scroll the main menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button .
Main Menu Mode Main Menu Mode Main Menu Paper Menu Default Source Tray <x>* MP Feeder Manual Paper Manual Env Configure MP Cassette* Manual NOTE: The Cassette setting configures the multipurpose feeder as an automatic paper source.
Main Menu Mode Main Menu Mode Main Menu Paper Texture Plain* Texture Card Stock Texture Transparency Texture Recycled Texture Labels Texture Bond Texture Envelope Texture Rough Envelope Texture Letter.
Main Menu Mode Main Menu Mode Main Menu Paper Weight Plain* Weight Card Stock Weight Transparency Weight Recycled Weight Labels Weight Bond Weight Envelope Weight Letterhead Weight Preprinted Weight C.
Main Menu Mode Main Menu Mode Main Menu Universal Setup Units of Measure Portrait Width Portrait Height Feed Direction *Factory default setting From the menu list, use the Arrow buttons to scroll to the Paper menu.
From this menu: You can: Default Source Set a default paper source for all print jobs. Tray <x>* MP Feeder Manual Paper Manual Env NOTE: The items on the default source vary depending on the device type and the attachments and/or supplies installed on it.
From this menu: You can: the multipurpose feeder. NOTE: The Cassette setting configures the multipurpose feeder as an automatic paper source. Custom Types Specify the type of print media associated with each Custom Type available in the Paper Type menu.
From this menu: You can: Heavy Paper Rough/Cotton Recycled Custom Type <x> (where x represents 1–6) MP Feeder Size Identify the size of print media loaded in the multipurpose feeder. A4* (non-US) A5 A6 JIS B5 Letter* (US) Legal Executive Folio Statement Universal NOTE: For more information, see Universal Setup .
From this menu: You can: A4* (non-US) A5 A6 JIS B5 Letter* (US) Legal Executive Folio Statement Universal NOTE: For more information, see Universal Setup .
From this menu: You can: Rough/Cotton Custom Type <x> (where x represents 1–6) Manual Envelope Size Identify the envelope size being manually loaded. 7 3/4 Envelope 9 Envelope 10 Envelope* (US) B5 Envelope C5 Envelope DL Envelope* (non-US) Other Envelope Manual Envelope Type Identify the envelope type being manually loaded.
From this menu: You can: Plain Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Light Heavy Rough/Cotton Custom <x> (where x represents 1–6) Specify the relative texture of the print media loaded in a specific tray.
From this menu: You can: Plain* Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Light Heavy Rough/Cotton Custom <x> (where x represents 1–6) Identify the relative weight of the print media loaded in a specific tray and ensure that the toner adheres properly to the printed page.
From this menu: You can: Recycled Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Custom Type <x> (where x represents 1–6) Determine whether 2-sided printing occurs for all jobs specifying a print media type.
From this menu: You can: NOTE: If the height exceeds the maximum, then the printer uses the maximum height allowed. NOTE: 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 356 mm is the international factory default setting.
4. When the setting you want appears on the display, press the Select button to save the setting. 5. From this menu: You can: Menu Settings Page Display information relating to: Current settings for e.
Network/Ports Mode Mode Main Menu Network/Port Active NIC Network Menu USB Menu Parallel Menu Active NIC Mode Main Menu Mode Main Menu Active NIC Auto* Standard Network * Factory default setting Netwo.
4. When the setting you want appears on the display, press the Select button to save the setting. 5. Network Mode Main Menu From this menu: You can: PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language.
Mode Mode Main Menu USB Buffer MAC Binary PS USB With ENA NOTE: Applicable only to Dell 3300 Wireless Print Adapter (sold separately). Use the USB menu to change printer settings on jobs sent through a USB port. From the menu list, use the Arrow buttons to scroll to the USB menu.
From this menu: You can: NPA Mode Send print jobs to the printer, and query printer status information at the same time. Off Auto* USB Buffer Assign a size to the USB input buffer. Auto* Disabled 3K to <maximum size allowed> (in 1K increments). MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs.
From the menu list, use the Arrow buttons to scroll the Parallel menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items.
From this menu: You can: Receive information at a much higher transmission rate if the printer is set to Fastbytes (if computer supports Fastbytes), or receive information at a normal transmission rate if the printer is set to Standard.
Mode Mode Main Menu Finishing Menu Quality Menu Utilities Menu PostScript Menu PCL Emul Menu General Settings Mode Main Menu Mode Main Menu General Settings Display Language Run Initial Setup Alarms Timeouts Print Recovery Factory Defaults From the menu list, use the Arrow buttons to scroll to the General Settings menu.
From this menu: You can: Display Language Set the language of the text appearing on the display. English* Arabic Brazilian Portuguese Czech Danish Dutch Finnish French German Greek Hebrew Iberian Port.
From this menu: You can: Print Timeout Disabled 1–255 seconds 90 seconds* Wait Timeout Disabled 15–65535 seconds 40 seconds* Network Job Timeout Disabled 10–255 seconds 90 seconds* Print Recover.
Main Menu Mode Main Menu Setup Printer Language Print Area Download Target Resource Save From the menu list, use the Arrow buttons to scroll to the Setup menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button .
From this menu: You can: Resource Save Specify whether all permanent downloaded resources, such as fonts and macros stored in RAM, are saved if the printer receives a job that requires more memory than is available. Off*-The printer retains downloaded resources only until memory is needed.
4. When the setting you want appears on the display, press the Select button to save the setting. 5. Finishing Mode Main Menu From this menu: You can: Sides (Duplex) Enable duplex (2-sided) printing.
From this menu: You can: N-up (Pages/Side) Specify that multiple-page images be printed on one side of a sheet of paper. Off* 2 Up 3 Up 4 Up 6 Up 9 Up 12 Up 16 Up N-up Ordering Specify the positioning of multiple-page images when using multi- page print.
1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. When the setting you want appears on the display, press the Select button to save the setting.
From this menu: You can: NOTE: This setting is available only on the PCL emulation driver, PostScript emulation driver, or on the printer Embedded Web Server. Gray Correction Automatically adjust the contrast enhancement applied to images. Auto* Off Auto applies different gray values to each object on the printed page.
From this menu: You can: Hex Trace Determine if there is a problem with the cable or language interpreter when unexpected character prints or missing characters are encountered Isolate printing proble.
From this menu: You can: protected flash option is installed in the device. * Factory default setting PCL Emul Mode Mode Menu Mode Main Menu PCL Emul Font Source Font Name Symbol Set PCL Emulation Settings Tray Renumber From the menu list, use the Arrow buttons to scroll to the PCL Emul menu.
From this menu: You can: Symbol Set Specify the symbol set for each font name. Default: 10U PC-8 PCL Emulation Settings Point Size NOTE: Only for PostScript emulation and typographic fonts. Change the point size for scalable typographic fonts. 1.00 – 1008.
From this menu: You can: Assign Tray <x> Assign Manual Paper Assign Man Env 0–199 View Factory Def Display the factory default setting assigned to each tray, drawer, or feeder. Restore Defaults Return all tray, drawer, and feeder assignments to the factory default settings.
Installing Optional Hardware Installing the 550-Sheet Optional Drawer Installing an Optional Memory Card Installing the 550-Sheet Optional Drawer An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit.
Turn the printer back on. 5. In Windows Vista ® or later: Click Control Panel . a. Click Hardware and Sound . b. Click Printers . c. In Windows ® XP and 2000 : Click Start Control Panel . a. Double-click Printers and Other Hardware . b. Double-click Printers and Faxes .
Installing an Optional Memory Card The system board has one connector for an optional memory card. The printer can support up to 160 MB for a non-network printer and 288 MB for a network printer. The printer memory can only be upgraded using 128 MB memory cards for both network and non-network printers.
5. Push the memory card firmly into the connector until the latches on both ends of the connector snap into place. It may require some force to fully seat the card. 6. Ensure that each latch fits over the notch on each end of the card. 7. Close the side cover.
11. Click Properties . 12. Click Install Options . NOTE: Memory cards designed for other printers may not work with your printer. 13. Click Ask Printer .
Loading Paper Setting the Paper Size and Paper Type Loading the 250-Sheet Paper Tray Loading the 550-Sheet Paper Tray Using the Rear Exit Using the Multipurpose Feeder Linking and Unlinking Trays Setting the Paper Size and Paper Type NOTE: You must install the software for your printer before configuring the paper trays.
Press the Arrow buttons until the correct source appears, and then press the Select button . Size appears under the source name. 5. Press the Select button . 6. Press the Arrow buttons until the correct size appears, and then press the Select button .
7. From the Printer Settings page, select Paper Menu . 8. Select Paper Type . 9. Select the paper type you have in each tray. 10. Click Submit . 11. Loading the 250-Sheet Paper Tray Follow these instructions to load paper in the 250-sheet paper tray. Remove the tray.
b. If you are loading an A6, you must lift the tab to accommodate the paper. NOTE: Make sure the paper is below the maximum fill line located on the edge of the tab. Overloading the tray can cause paper jams and possible printer damage. 3. Flex a stack of paper back and forth.
4. Load the paper in the tray with the print side facing down. Ensure that the paper is below the maximum fill line on the side paper guides. Overloading may cause paper jams. 5. Slide the two side guides and the rear guide until they rest against the edges of the paper.
8. Loading the 550-Sheet Paper Tray Follow these instructions to load paper in the 550-sheet paper tray. Remove the tray. 1. If you are loading legal or folio-size paper, you must adjust the paper tray to accommodate the larger paper. Press down on the latch at the back of the tray.
b. Flex a stack of paper back and forth. Straighten the edges on a level surface. 3. Load the paper in the tray with the print side facing down. Ensure that the paper is below the maximum fill line on the side paper guides. Overloading may cause paper jams.
5. Replace the tray. 6. Extend the paper support on the output bin. 7. Using the Rear Exit The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams. This is especially useful for specialty media, such as transparencies, envelopes, labels, card stock, or index cards.
Using the Multipurpose Feeder Configuring the Multipurpose Feeder This setting is used to designate the mode of operation for the multipurpose feeder. Mode Cassette* The multipurpose feeder source: fu.
1. Slide the multipurpose feeder tray forward. 2. Pull the extension so it flips forward. 3. Guide the extension down gently to fully extend the multipurpose feeder.
engages the print media too soon and likely skews the print job. NOTE: Do not exceed the maximum stack height by forcing paper or specialty media under the stack height limiters which are located on the guides. 1. Adjust the paper guides to the print media's width.
Flex a stack of envelopes back and forth to loosen them. Straighten the edges on a level surface. NOTE: Do not fold or crease envelopes. Hold both sides of the print media close to the multipurpose feeder, and load it into the printer. 4. NOTICE: Do not force the print media into the feeder.
Load letterhead facing up, with the top of the sheet entering the printer first. If you experience problems with paper feed, turn the paper around. Linking and Unlinking Trays Linking trays Tray linking is useful for large print jobs or multiple copies.
Setting up for Local Printing Windows ® Mac OS ® X: Adding the Printer in Print Center or Printer Setup Utility Linux ® Windows ® Some Windows operating systems may already include a printer driver that is compatible with the printer. NOTE: Installing custom drivers do not replace the system driver.
2. Select your printer from the drop-down menu. 3. Select Typical Installation (recommended) , and then click Install . 4. Click Finish , connect the printer to the computer using a USB or parallel cable, and turn on the printer. The installation prompts you when the setup is completed.
The Add Printer Wizard opens. If necessary, click Next . 3. Click Next . 4. Select Add a local printer or Local printer attached to this computer , and then click Next . You are prompted to attach the printer to the computer. 5. Select the port you want your printer to use, and then click Next .
11. Installing Additional Printer Software Turn on your computer, and insert the Software and Documentation CD. The Software and Documentation CD should launch the installation software automatically. 1. Select Additional Software Installation - Install the printer support software , and then click Next .
f. Enter the administrator password, and then click OK . The software is installed on the computer. g. Quit the installer when it is finished. h. Open Printer Setup Utility , located in /Applications/Utilities . 2. If the USB printer appears in the Printer List: The printer has been set up successfully, and you can quit the application.
Setting up for Network Printing Windows ® Install the Shared Printer on Client Computers Mac OS ® X: Adding the Printer in Print Center or Printer Setup Utility Linux ® Printing a Network Setup Page Windows ® In Windows environments, network printers can be configured for direct printing or shared printing.
In Windows environments, network printers can be configured for direct printing or shared printing. Both network printing options require the installation of printer software and the creation of a network port. IP Printing Shared Printing Printer is connected directly to the network using a network cable, such as an Ethernet cable.
Click Next . 5. For each printer driver listed: NOTE: Three printer drivers are listed for each printer you selected: a Printer Control Language (PCL), PostScript (PS), and Host Based Printing (HBP) driver. Select the printer driver from the list. a. If you want to change the printer name, enter a new name in the Printer Name field.
c. Click Finish . d. Direct Attachment With a Network Cable (No Print Server) Insert the Software and Documentation CD. The Software and Documentation CD launches the installation software automatically.
Click Next . 7. Select the check box next to the software and documentation you want to install, and then click Install . The drivers, additional software, and documentation are installed on your computer. When the installation is completed, a Congratulations! screen appears.
b. Click Printers . c. In Windows ® XP (default Start menu): Click Start Control Panel . a. Double-click Printers and Other Hardware . b. Double-click Printers and Faxes . c. In Windows Vista ® (Classic Start menu) and all other Windows versions: Click Start Settings Printers .
correct for your CD-ROM drive, and then click OK . b. Click Close . 8. To check that the printer was successfully shared: Ensure that the printer object in the Printers folder shows it is shared. For example, in Windows 2000, a hand is shown underneath the printer icon.
In Windows Vista ® or later (default Start menu): Click Control Panel . 1. Click Hardware and Sound . 2. Click Printers . 3. In Windows ® XP (default Start menu): Click Start Control Panel . 1. Double-click Printers and Other Hardware . 2. Double-click Printers and Faxes .
Click Control Panel . a. Click Hardware and Sound . b. Click Printers . c. In Windows ® XP (default Start menu): Click Start Control Panel . a. Double-click Printers and Other Hardware . b. Double-click Printers and Faxes . c. In Windows ® XP (Classic Start menu): Click Start Settings Printers and Faxes .
Click Control Panel . 1. Click Hardware and Sound . 2. Click Printers . 3. In Windows ® XP (default Start menu): Click Start Control Panel . 1. Double-click Printers and Other Hardware . 2. Double-click Printers and Faxes . 3. In Windows ® XP (Classic Start menu): Click Start Settings Printers and Faxes .
Insert the Software and Documentation CD. a. Double-click the installer package for the printer. b. Continue past the Welcome screen and the Read me. c. Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.
d. If you want to print using AppleTalk: Click More Printers... and then choose AppleTalk from the pop-up menu. a. Choose the AppleTalk Zone from the list. NOTE: Look under the AppleTalk heading on the printer network setup page to know which zone and printer to select.
2. Printing a Network Setup Page A network setup page lists the configuration settings of the printer, including the IP address and MAC address. This information is very helpful when troubleshooting the network configuration of the printer. To print a network setup page: Press the Menu button .
Software Overview Status Monitor Center Set IP Address Utility Dell Printer Software Uninstall Utility Driver Profiler Dell Printer Configuration Web Tool Dell Printer Alert Utility Removing and Reins.
Set IP Address Utility NOTE: This application is not available when the printer is locally attached to a computer. For the Set IP Address Utility to work properly, add an exception to the Windows ® Firewall. The Set IP Address Utility lets you set up an IP address and other important IP parameters.
7. Dell Printer Software Uninstall Utility Use the Uninstall Software Utility to remove any currently installed printer software or printer objects. In Windows Vista ® or later: Click Programs . a. Click Dell Printers . b. Click your Dell Laser Printer model .
User-defined paper sizes (custom papers) Simple text and watermarks Overlay references Font references Form associations Dell Printer Configuration Web Tool NOTE: This application is not available when the printer is connected locally to a computer.
server firmware. Copy Printer Settings -Quickly clone the printer's settings to another printer or printers on the network by typing each printer's IP address. NOTE: You must be a network administrator to use this feature. Printing Statistics -Keep track of printing trends, such as paper usage and types of jobs being printed.
From the System Tray, right click the icon. 1. Select Exit . 2. To re-enable the Dell Printer Alert Utility: In Windows Vista ® or later (default Start menu): Click Programs . a. Click Dell Printers . b. Click your Dell Laser Printer model . c. In Windows ® XP : Click Start Programs or All Programs Dell Printers your Dell Laser printer model .
Click Start Programs or All Programs Dell Printers your Dell Laser printer model . Click Dell Printer Software Uninstall . 2. Follow the instructions on the screen. 3. Restart your computer. 4. Insert the Software and Documentation CD, and then follow the instructions on the screen.
Monitor the toner level for your printer. Click Order Supplies to order replacement toner cartridges. Dell Printer Supplies Reorder Application The Order Supplies dialog box can be launched from the Printing Status window, the Programs window, or the desktop icon.
.
Printing Printing Documents Printing on Envelopes Printing Using the Multipurpose Feeder Printing on Letterhead Printing a Two-Sided Document (Duplex Printing) Printing a Poster Printing Multiple Page.
Printing Using the Multipurpose Feeder The multipurpose feeder is located at the front of your printer and can feed up to 50 sheets of print media at a time.. With your document open, click File Print . 1. Click Properties (or Options , Printer , or Setup , depending on the application or operating system).
Long Edge Short Edge Pages are bound along the long edge of the page (left edge for portrait, top edge for landscape. Pages are bound along the short edge of the page (top edge for portrait, left edge for landscape. With your document open, click File Print .
1. Click Properties (or Options , Printer , or Setup , depending on the application or operating system). The Printing Preferences dialog box opens. 2. In the Multipage printing (N-up) section, specify the number of pages you want printed on a sheet by typing a number or using the arrows in the combo box.
3. Click Booklet . 4. Click OK twice. 5. Click OK on the Print window to send the job to print. 6. Printing on Envelopes Turn on your computer and printer, and ensure that they are connected. 1. With your document open, click File Print . The Print dialog box opens.
Tray 1 or 2 -Load the letterhead with the print side facing down. The top edge of the sheet with the logo should be placed at the front of the tray. Multipurpose feeder -Load the letterhead with the print side facing up and the top of the sheet entering the printer first.
8. Printing a Poster The Poster setting lets you print a single image across several pages. Once printed, you can combine the pages to create one large image. With your document open, click File Print . 1. Click Properties (or Options , Printer , or Setup , depending on the application or operating system).
Load transparencies. 1. With a document open, click File Print . 2. Click Properties (or Options , Printer , or Setup , depending on the application or operating system). The Printing Preferences dialog box appears. 3. Click the Paper tab. 4. Select Transparency from the Paper Type drop-down list.
b. Click Printers . c. In Windows ® XP (default Start menu): Click Start Control Panel . a. Double-click Printers and Other Hardware . b. Double-click Printers and Faxes . c. In Windows ® XP (Classic Start menu): Click Start Settings Printers and Faxes .
Maintaining Your Printer Ordering Supplies Storing Supplies Replacing Supplies Cleaning the Exterior of the Printer CAUTION: Before performing any of the procedures listed in this section, read and follow the safety information in your Product Information Guide .
a. Click Dell Printers . b. Click your Dell Laser Printer model . c. In Windows ® XP and 2000: Click Start Programs or All Programs Dell Printers your Dell Laser printer model . Click Dell Printer Supplies Reorder Application . The Order Supplies window opens.
Temperatures greater than 40°C (104°F). An environment with extreme changes in humidity or temperature. Direct sunlight. Dusty places. A car for a long period of time.
2. Pull the toner cartridge assembly out of the printer by pulling on the toner cartridge handle. NOTE: Do not press the button on the toner cartridge assembly.
clicks into place when correctly installed. 7. Install the toner cartridge assembly into the printer by aligning the blue arrows on the guides of the toner cartridge with the blue arrows in the printer and pushing the toner cartridge assembly as far as it will go.
Firmly shake it side-to-side and front-to-back several times to redistribute the toner, and then reinsert it and continue printing. Repeat this procedure multiple times until print remains faded. When the print remains faded, replace the toner cartridge.
NOTICE: When replacing a toner cartridge assembly, do not leave the new cartridge exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems. Rotate the cartridge in all directions to distribute the toner.
2. Dampen a clean, lint-free cloth with water. NOTICE: Do not use household cleaners or detergents, as they may damage the finish of the printer. 3. Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray.
Administrative Support Using the Embedded Web Server Locking the Operator Panel Menus Using the Embedded Web Server Creating an Administrative Password Using the Embedded Web Server If the printer is .
Web Server You can use the operator panel lockout functionality to create a PIN and choose specific menus to lock. Each time a locked menu is selected, the user will be prompted to enter the correct PIN. The PIN does not affect access through the Embedded Web Server.
2. Click Configuration . 3. Under Other Settings, click Security . 4. Assign password security for specific device settings. 5. Create advanced or user password. NOTE: Password range is 8–128 characters. 6. Click Submit . To reset the password, click Reset Form or click the Change/Remove Advanced Password link.
Troubleshooting Your Printer Frequently Asked Questions (FAQ): Dell™ 2330d/dn and 2350d/dn Laser Printer Issues and Solutions Paper Problems Setup Problems Printing Problems Error Messages Print Qua.
NOTE: For the local Status Monitor Center to work properly, bidirectional communication support must be in place so that the printer and computer can communicate. An exception is added to the Windows Firewall to allow this communication. If this does not resolve this issue, check the USB cable connection with the printer.
See Printing a Network Setup Page . How do I change the printer IP address by using the Dell Printer Configuration Web Tool? See Dell Printer Configuration Web Tool . How do I set up the printer wirelessly using a third-party wireless print server? Refer to the steps in the documentation that was provided with the wireless print server.
If the software installation screen does not appear automatically, install the software manually. Insert the Software and Documentation CD. 1. In Windows Vista ® or later, click Computer . In Windows XP , click Start My Computer . In Windows 2000 , double-click My Computer from your desktop.
power cable to the electrical outlet, and turn on the printer. Restart your computer. If the problem still exists, replace the USB cable. Set your printer as the default printer. In Windows Vista ® or later: Click Control Panel . a. Click Hardware and Sound .
b. Click Printers . c. In Windows XP , click Start Control Panel Printers and Other Hardware Printers and Faxes . In Windows 2000 , click Start Settings Printers . Check for multiple objects for your printer. 2. Print a job to each of these print objects to see which printer is active.
b. Click Printers . c. In Windows ® XP , click Start Control Panel Printers and Other Hardware Printers and Faxes . In Windows ® 2000 , click Start Settings Printers . Right-click your Dell Laser Printer model icon. 2. Make sure Pause Printing is not selected.
Load <Input Src> With <Size> Load the input source with the correct paper size or press the Cancel button to cancel the print job. Load <Input Src> With <Type> <Size> Load the input source with the correct paper type and size or press the Cancel button to cancel the print job.
Load Multipurpose Feeder With <Size> Load the multipurpose feeder with the correct paper size. If there is no paper in the multipurpose feeder, feed a sheet of paper to clear the message. To ignore the request and print on paper that is already being used in one of the input source, press the Back button .
30 Invalid Refill, Change Toner Cartridge The printer has detected a refilled toner cartridge. Remove the toner cartridge and install a new one. 31 Missing or Defective Cartridge If the toner cartridge is not installed, install it. If the toner cartridge is installed, remove it and install a new toner cartridge.
print correctly. To cancel the print job, press the Cancel button . To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
38 Memory Full To clear the message and continue printing, press the Back button . The remainder of the print job may not print correctly. To cancel the print job, press the Cancel button .
Upgrade the network firmware in the printer or print server. To ignore the message and continue printing, press the Back button . The current job may not print correctly. To cancel the print job, press the Cancel button . 56 Standard Parallel Port Disabled The printer discards any data received through the parallel port.
Remove the memory from your printer. Your printer supports up to 160 MB for a non-network printer and 288 MB for a network printer. 58 Too Many Trays Attached Turn the printer off. Unplug the power cord from the wall outlet. Remove the excess trays. Turn the printer back on.
To cancel the print job, press the Cancel button . 84 Imaging Drum Life Warning/PC Unit Life Warning NOTE: You receive the imaging drum life warning only if you have the Toner Alarm set to On. To ignore the message and continue printing, press the Back button .
Replace the specified toner cartridge. To ignore the message and continue printing, press the Back button . The remainder of the print job may not print correctly. To cancel the print job, press the Cancel button . 200 Paper Jam There is a paper jam at the printer input sensor.
3. Install the toner cartridge assembly into the printer. 4. Close the front cover. 5. 201 Paper Jam There is a paper jam between the printer input and paper exit sensors. Open the front cover by pressing the button on the right side of the printer and lowering the cover.
CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 2. Remove the jammed paper. 3. Install the toner cartridge assembly into the printer. 4. Close the front cover.
1. Remove the jammed paper. 2. Close the rear exit. 3. 231 Paper Jam - Check Duplex There is a paper jam in the rear of the duplex paper path. Open the rear exit.
2. Close the rear exit. 3. 233 Paper Jam - Check Duplex There is a paper jam in the front of the duplex unit. Remove Tray 1, and then depress the lever in the duplex paper path area. CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
3. 234 Paper Jam - Check Duplex There is a paper jam in the duplex unit, but the printer cannot identify the location. Remove Tray 1, and then depress the lever in the duplex paper path area.. CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
3. Open the rear exit. 4. Remove any jammed paper. 5. Close the rear exit. 6. 235 Paper Jam - Check Duplex There is a paper jam at the output bin because the paper used was too narrow for the duplex unit.
1. Remove the jammed paper. 2. Close the rear exit. 3. Replace the narrow paper in Tray 1 with a wider paper. 4. 24x Paper Jam - Check Tray <x> Jam in Tray 1 Pull Tray 1 out. CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
2. Insert the tray. 3. Jam in Tray 2 Pull Tray 2 out. CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
NOTE: Make sure all paper fragments are removed. 2. Insert the tray. 3. 251 Paper Jam - Check Multipurpose Feeder Remove the paper from the multipurpose feeder. 1. Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.
2. Load the paper into the multipurpose feeder. 3. Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper. 4. General Guidelines for Selecting or Loading Print Media Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality.
During storage, you should use moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating the paper. Avoiding Jams and Misfeeds You can avoid most jams and misfeeds by following these guidelines: Use paper that follows the printer's media guidelines.
1. Pull the toner cartridge assembly out of the printer by pulling on the toner cartridge handle. NOTE: Do not press the button on the toner cartridge assembly. CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
5. Paper jam not visible Near the multipurpose feeder Open the multipurpose feeder door. 1. Firmly grasp the paper, and gently pull it from the printer. 2. Close the multipurpose feeder door. 3. Near the paper input tray Remove the paper input tray. 1.
2. Replace the paper input tray. 3. Near the output bin extender Press the door release button on the right side of the printer to open the front cover. 1. Firmly grasp the paper, and gently pull it from the printer. 2. Close the front cover. 3. Near the rear exit Open the rear exit door.
1. Firmly grasp the paper, and gently pull it from the printer. 2. Close the rear exit door. 3. Paper Problems Make sure you loaded the paper correctly. For more information, see Loading Paper . Use only paper recommended for your printer. For more information, see Print Media Guidelines .
Printing Problems Check the toner level, and install a new toner cartridge if necessary. For more information, see Replacing the Toner Cartridge . Free up memory resources on your computer when print speed is slow Close all applications not in use. Try minimizing the number and size of graphics and images in your document.
You are using paper that does not meet the printer specifications. The toner cartridge is low on toner. The toner cartridge is defective. Try the following: Select a different Toner Darkness 1 setting before sending the job to print. Load paper from a new package.
The printhead lens is dirty. The toner cartridge is defective. The fuser 2 is defective. Try the following: Clean the printhead lens. Replace the toner cartridge. Replace the fuser 2 . Streaked horizontal lines appear on the page. The toner cartridge may be defective, empty, or worn.
Try the following: If the paper is stiff, try feeding from another tray or the multipurpose feeder. Replace the toner cartridge. The page contains print irregularities. Paper has absorbed moisture due to high humidity. You are using paper that does not meet the printer specifications.
Use only transparencies recommended by Dell. Ensure that the Paper Type setting is Transparency. Toner specks appear on the page. The toner cartridge is defective. The fuser 2 is worn or defective. Toner is in the paper path. Try the following: Replace the toner cartridge.
Change the Paper Weight setting to the appropriate weight. Replace the fuser 2 . Print density is uneven. The toner cartridge is defective. Replace the toner cartridge. Ghost images appear on the page. The Paper Type is set incorrectly. The toner level is low.
Ensure that the Paper Size setting matches the paper loaded in the tray. Print is skewed (inappropriately slanted). The guides in the selected tray are not in the correct position for the paper size loaded in the tray. The multipurpose feeder guides are not in the correct position for the paper size loaded in the feeder.
Call for service. Paper curls badly once it prints and exits to the bin. The Paper Texture setting is wrong for the type of paper or specialty media you are using. Ensure that the Paper Texture setting matches the paper loaded in the tray. 1 For more information, see Quality Mode .
To print multiple copies of a PDF file with these features, use Apple Preview or Adobe Acrobat Reader 5. How do I manage network printers? Use MarkVision™ Professional to manage your network printers. This application replaces MarkVision for Macintosh and is compatible with Mac OS X or higher.
1. From the Settings pop-up menu, choose Custom Paper Size . 2. Click New , and then enter the appropriate information about the custom paper size. 3. Click Save . NOTE: You must click Save before clicking OK or switching back to the Page Attributes pane in the Settings pop-up menu.
Enter the IP address of the print server into your Web browser. 1. From the menus at the left of the Web page, choose Configuration . 2. From the list of configuration options on the right, choose AppleTalk . 3. From the AppleTalk page, choose Advanced Settings .
Is the printer cover closed properly? Try turning your printer off and back on again. If your printer is still not operating properly, call for service. If you are able to print, press the Menu button to print a menu settings page, which lists the printer model type and other information the service representative may need to know.
Specifications Overview Print Media Guidelines Environmental Specifications Media Types and Sizes Emulation, Compatibility, and Connectivity Font Summary Operating System Support Cables MIB Compatibility Certifications Overview 2330d/2350d 2330dn/2350dn Base memory 32 MB 32 MB Maximum memory 160 MB 288 MB Connectivity Parallel USB 2.
Condition Temperature Relative humidity (non- condensing) Altitude Operation 16 to 32°C (60 to 90°F) 8 to 80% 0 to 2,500 M (8,200 feet) Storage 0 to 40°C (32 to 104°F) 8 to 80% Shipping -20 to 40°C (- 4 to 104°F) 8 to 95% 0.
Windows 7 Microsoft Windows Server 2008 Microsoft Windows Server 2008 R2 Windows Vista Windows XP Windows Server 2003 Windows 2000 Debian GNU/Linux 4.0 Linspire Ubuntu 7.1.0, 8.0.4, 8.0.4 LTS Red Flag Linux Desktop 5.0, 6.0 Red Hat Enterprise Linux WS 3, 4, 5 SUSE LINUX Enterprise Server 8, 9, 10 SUSE Linux Enterprise Desktop 10 open SUSE Linux 10.
HP-UX 11.11, 11.23, 11.31 Macintosh OS X MIB Compatibility A Management Information Base (MIB) is a database containing information about network devices (such as adapters, bridges, routers, or computers). This information helps network administrators manage the network (analyze performance, traffic, errors, and so on).
Contain windows, holes, perforations, cutouts, or embossing. Use metal clasps, string ties, or metal folding bars. Have postage stamps attached. Have any exposed adhesive when the flap is in the sealed position. Use card stock with a maximum weight of 163 g/m 2 and a minimum size of 3x5 in.
Source Media and Size Types Weight Capacity 1 (Sheets) Feeder NOTE: When printing card stock using the multipurpose feeder, open the rear exit. Legal, Executive, Folio, Statement, Universal, 7 3/4 Envelope, 9 Envelope, 10 Envelope, B5 Envelope, C5 Envelope, DL Envelope, Other Envelope Minimum feed size is 76.
Font Name PCL XL Font Name Bitmap/Scalable Courier Italic Courier It S Courier Bold Courier Bd S Courier Bold Italic Courier BdIt S CG Times CG Times S CG Times Bold Italic CG Times BdIt S Univers Med.
Font Name PCL XL Font Name Bitmap/Scalable CG Omega Bold CG Omega Bd S CG Omega Bold Italic CG Omega BdIt S Antique Olive AntiqOlive S Antique Olive Italic AntiqOlive It S Antique Olive Bold AntiqOliv.
Font Name PCL XL Font Name Bitmap/Scalable Century Schoolbook Roman NwCentSchlbk Rmn S Century Schoolbook Italic NwCentSchlbk It S Century Schoolbook Bold NwCentSchlbk Bd S Century Schoolbook Bold Ita.
Symbol Set Name Latin 1 Legal Windows 3.0 Latin 1 Windows 98 Latin 1 ISO 8859-1 Latin 1 (ECMA-94) ISO 8859-15 Latin 9 PC-8 Code Page 437 PC-8 Danish/Norwegian (437N) PC-850 Multilingual PC-858 Multili.
Symbol Set Name ISO 8859-9 Latin 5 PC-857 Latin 5 (Turkish) PC-853 Latin 3 (Turkish) PC-8 Turkish (437T) Turkish-8 Latin 6 Windows 98 Latin 6 (Baltic) ISO 8859-10 Latin 6 PC-775 Baltic (PC-8 Latin 6) .
Symbol Set Name OCR-A OCR-B C39 Bar Code (Upper Case) C39 Bar Code (plus Lower Case) C39 Bar Code (plus Human Readable) Symbol Wingdings Ventura ITC Zapf Dingbats PS ITC Zapf Dingbats PCL ITC Zapf Din.
PS Font List PostScript Font Name Character Sets Supported AlbertusMT L1 AlbertusMT-Italic L1 AlbertusMT-Light L1 AntiqueOlive-Roman L1, L2, L5, L6 AntiqueOlive-Italic L1, L2, L5, L6 AntiqueOlive-Bold.
PostScript Font Name Character Sets Supported Helvetica L1, L2, L5, L6 Helvetica-Oblique L1, L2, L5, L6 Helvetica-Bold L1, L2, L5, L6 Helvetica-BoldOblique L1, L2, L5, L6 Helvetica-Light L1 Helvetica-.
PostScript Font Name Character Sets Supported Marigold L1 NewCenturySchlbk- Roman L1, L2, L5, L6 NewCenturySchlbk- Italic L1, L2, L5, L6 NewCenturySchlbk- Bold L1, L2, L5, L6 NewCenturySchlbk- BoldIta.
PostScript Font Name Character Sets Supported Univers- CondensedOblique L1, L2, L5, L6 Univers- CondensedBold L1, L2, L5, L6 Univers- CondensedBoldOblique L1, L2, L5, L6 Wingdings-Regular non-text fon.
Appendix Dell Technical Support Policy Contacting Dell Warranty and Return Policy Dell Technical Support Policy Technician-assisted technical support requires the cooperation and participation of the .
Anonymous file transfer protocol (FTP) ftp.dell.com Log in as user: anonymous, and use your email address as your password. Electronic Support Service mobile_support@us.dell.com support@us.dell.com la-techsupport@dell.com (Latin America and Caribbean countries only) apsupport@dell.
Licensing Notice BSD License and Warranty statements GNU License The printer resident software contains: Software developed and copyrighted by Dell and/or third parties Dell modified software licensed under the provisions of the GNU General Public License version 2 and the GNU Lesser General Public License version 2.
2. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. 3. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'&.
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program w.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.
library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.
refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
An important point after buying a device Dell 2330D/DN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 2330D/DN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 2330D/DN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 2330D/DN you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 2330D/DN will certainly help you make a decision on the purchase.
If you already are a holder of Dell 2330D/DN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 2330D/DN.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 2330D/DN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 2330D/DN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
