Instruction/ maintenance manual of the product 2000FP Dell
Go to page of 10
Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. 1 Dell 2000FP Logic Board Installation Instructions.
Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. 2 The Dell 2000FP was designed for a wide variety of users ranging from the home, small office, or corporate environment.
3 Norris Parts Repair Manu al Disassembly Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 1: Remove the four (4) screws from the top of the base. Step 2: Remove the base. Step 3: Remove the four (4) screws from the back cover.
4 Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 4: Stick a flat screw driver betw een the back cover and the front bezel on the bottom of the LCD. Step 5: Remove the back cover from the bottom of the LCD.
5 Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 7: Rotate the LCD to the side to continue removing the back cover. Step 8: Rotate the LCD to the other side to continue removing the back cover.
6 Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 9: Remove the back cover. Step 10: Remove the two (2) screws from the inverter board’s metal cover. Step 11: Remove the inverter board’s metal cover.
7 Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 12: Remove the fifteen (15) screw s from the logic board’s metal cover. Step 13: Remove the logic board’s metal cover.
8 Norris Parts Repair Manu al Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited. Step 14: Unplug connector from the logic board. Step 15: Unplug the two (2) connectors from the logic board. Step 16: Unplug connector from the logic board.
9 Norris Parts Repair Manu al Step 17: Unplug connector from the logic board. Step 18: Remove the seven (7) screws from the logic board. Copyright©2006 – All Right s Reserved - Distri bution or Duplication of this document is prohibited.
10 Norris Parts Repair Manu al Step 19: Remove the logic board. Step 20 – Reassembly Inspect new part ensuring that any p acking materials or tape are removed. Follow the directions in reverse to complete the installation of the replacement part. Make sure that all connectors are plugged in.
An important point after buying a device Dell 2000FP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 2000FP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 2000FP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 2000FP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 2000FP will certainly help you make a decision on the purchase.
If you already are a holder of Dell 2000FP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 2000FP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 2000FP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 2000FP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center