Instruction/ maintenance manual of the product 7187 3M
Go to page of 7
1 8214/8514/07187 Respirator N95 Particulate 3M recommended for welding on stainless steel, aluminum, galvanized steel, and other applications where ozone and nuisance organic vapors* may be present. User Instructions (Keep insert for reference) T M .
2 07187 is a catalog number only. NIOSH approved as 3M™ 8214 N95 Particulate Respirator. * 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower (not NIOSH approved for use against ozone).
3 Use Limitations: 1 . This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen. 2 . Do not use when concentrations of contaminants are immediately dangerous.
4 2. Pull the top strap over your head, resting it above the ears at the top back of your head. Untwist the strap. Diagram 2 3 . Adjust the strap tension by pulling the straps as shown (3a). Strap tension may be de creased without removing respirator from the head by pushing out on the back of the buckle (3b).
5 5 . Perform a User Seal Check prior to each wearing. To check the respirator-to-face seal, cover the front of the respirator completely with both hands, being careful not to disturb the position of the respirator. Inhale sharply. A negative pressure should be felt inside the respirator.
6 NIOSH Approved: N95 At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil. This respirator contains no components made from natural rubber latex.
7 FOR MORE INFORMATION and assistance on 3M occupational health and environmental safety products, contact your local 3M representative or call 3M OH&ESD Technical Service toll free in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
An important point after buying a device 3M 7187 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 7187 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 7187 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 7187 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 7187 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 7187, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 7187.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 7187. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 7187 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
