Instruction/ maintenance manual of the product 711/811 3M
Go to page of 16
Conversion Station Model 711/811 Owner’s Manual 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 www.3m.com/library.
Copyright © 2006 , 3M. All rights reserve d. 78-8129-2471-6_B 3M is a tradem ark of 3M..
1 Table of Contents Safety Information .................................................................................... 2 Intended use ................................................................................................................
2 Safety Information Read, understand, and follo w all safety information contained in these instructions prior to installation and use of th e 3M ™ Conversion Station Model 711 and Model 811.
3 WARNING To reduce the risk associated with hazardous voltage: Do not attempt to modify or re pair — no user serviceable parts in si de — contact 3M Service f or repair. To reduce the risk associated with back strain related injury: Follow safe lifting procedures.
4 Safety Label Locations FCC ID: DGF-DCS71 1 This device compl ies with Part 15 of t he FCC Rules. Operatio n is subject to the following two con ditions: ( 1) this device may not cau se harmful int e r ference, and (2) this dev ice must accept any in terferenc e rec eived, inc lud ing interfe r ence that may c ause undesired operatio n.
5 Specifications Shipping Size Tag Types Height 47.5 inches [1207mm] Width 42.5 inches [1080mm] Depth 30.0 inches [762mm] Weight 338 lbs. [154 kg] Model 711/ 811 Height 55.25 in. [1403mm] Width 30.0 in. [762mm] Depth 18.0 in. [457mm] Weight 150 lbs. [68.
6 Components 71 1-81 1_HG_001 1 2 3 4 5 6 7 8 9 10 11 12 Figure 1 711/811 Components Item Description Item Description 1 Scanner 7 Keyboard 2 Touch screen monitor 8 Memory card drive 3 Tag dispenser 9.
7 Using the Tag Dispenser IMPORTANT NOTES Do not bend, fold, or damage RFID tags because this may cause p rematu re tag failure. If you discover a tag with a hole punched through it, do not use the tag. A hole ind icate s that the tag was identified as defective during inspec tion.
8 Operator tool kit The Conversion Station comes with a tool kit attached to the inside right front door. To o l K i t 71 1-81 1_HG_003 The tool kit contains: Three 3M RFID tag threading tools) .
9 Loading the tag dis penser with tags 1 Open the Conversion Station cabinet doors and locate the tag dispenser. 2 Locate the supply role shaft. 71 1-81 1 _ HG _ 002 T ag Dispen ser 10 Supply Roll Shaf t 3 Rotate the supply roll shaft until it is in the up position.
10 7 Install the roll of tags on the supply role shaft and thread the tags through the unit to the take-up spool. On Off Jog 812_FSH_002 8 Remove the take-up spo ol endpl ate and the take-up spool. 9 If there is a liner from the previous roll of tags, remove it and put the take-up spool back in place.
11 Cleaning the tag dispenser opening Use a soft cloth to remove any dust from the tag dispenser opening. Cleaning the spring pl ate (tensioner/guide) Clean the spring plate approximately every 5,000 tags or as n ecessary.
12 Troubleshooting Tag Dispenser problems The tag dispenser s witch controls the motor used to advance tags to the feeder opening on the top of the Conversion Station.
13 Service 3M Service phone numbers In the United States Library Systems: 1-800-328-0067 (Option 1) In Canada English 1-800-268-6 235 Français 1-800-567-3193 In other countries Call your local 3M office.
Conversion Station M odel 711-811 Owner’s Manual.
An important point after buying a device 3M 711/811 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 711/811 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 711/811 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 711/811 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 711/811 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 711/811, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 711/811.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 711/811. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 711/811 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
