Instruction/ maintenance manual of the product MASTER STATION AI-MS900 Aiphone
Go to page of 16
INSTR UCTION MANU AL MASTER ST A TION AI-MS900 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. Be sure to leave system installations, adjustments, and data settings to the dealer from whom you have purchased.
2 T ABLE OF CONTENTS 1. SAFETY PRECA UTIONS ............................................................................................. 3 2. FCC REQUIREMENTS ...........................................................................................
3 1. SAFETY PRECA UTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
4 (4 ) If the AI-900 disrupts the telephone network, the telephone company can discontinue your service temporarily. If possible, the telephone company will notify you in advance. If advance notice is not practical, they will notify you as soon as possible.
5 5. GENERAL DESCRIPTION The AI-MS900 can make calls to or receive calls from the substation or the master station (telephone). It utilizes 2 pairs of twisted cables. 6. NOMENCLA TURE AND FUNCTIONS 2 ABC 13 DEF 12 34 56 78 5 JKL 4 GHI 6 MNO 8 TUV 7 PRS 9 WXY 0 C OPER P T T REDIAL XFER # HANDSET REGISTER Do not connect thei jack to telephone line.
6 7. INST ALLA TION 7.1. Mounting 7.1.1. Desk-top mounting Connect the supplied modular-plug cord. 7.1.2. Wall mounting Pull out, rotate, and reset the cradle hook, then mount the station on the wall using the supplied wall mounting frame. Remove the cradle hook.
7 7.2. Connection and Adjustment 7.2.1. External speaker connection Follow the procedures below when connecting an external speaker (8 Ω ). Step 1. Remove the AI-MS900's rear terminal cover and set the internal slide switch to the [EXT. SP] position.
8 8. OPERA TION 8.1. Calling a Substation Step 1. Dial the desired substation number. (Dialing can be performed with the handset on-hook or off- hook.) Step 2. Following a brief call tone, the master station is automatically connected to the substation.
9 Step 3. The call tone stops and conversation can proceed when the called party answers. Step 4. To terminate the conversation, replace the handset or press the [C] key. 8.3. Being Called Step 1. A trill call tone is heard. Step 2. Lifting the handset stops the call tone and permits conversation to proceed.
10 8.4. Con versation Method There are three different conversation methods possible when the master station is used. The conversation method is determined by the other party's station type and handset use.
11 8.5. Calling P arty Display and Selective Response 8.5.1. Calling party display The master station can only display one of up to 64 calling stations by means of its 6-digit number or 8- character name.
12 8.5.2. Selective response When multiple calls are simultaneously made to the master station, the master station can select and answer any desired calling party. (Note this function can only be performed by a dedicated master station and not a telephone.
13 8.6. A uto Dialing 8.6.1. Auto dialing key call A one-touch press of an auto dialing key automatically dials the station number or functional number of dialing sequence to activate Paging, Call Forwarding, or other functions assigned to into that key.
14 Step 5. Press the new keys to register using the dialing keys [0] – [9] or function keys [ ], [#] or [REDIAL]. Notes • If the [C] key is pressed before dialing a complete number, the contents before the [C] key was pressed are all erased. • Mark "-" is displayed when the [REDIAL] key is pressed.
15 Step 5. Press the [PTT] key again. The erasure is then completed, as indicated by a confirmation tone. Step 6. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode. 8.6.4. Auto dialing key registration confirmation Step 1.
Printed in Japan 133-06-236-80 8.7. Redial By one-touch pressing the master station's [REDIAL] key, the last dialed number will be dialed again. 9 2 Call No.
An important point after buying a device Aiphone MASTER STATION AI-MS900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiphone MASTER STATION AI-MS900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiphone MASTER STATION AI-MS900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiphone MASTER STATION AI-MS900 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiphone MASTER STATION AI-MS900 will certainly help you make a decision on the purchase.
If you already are a holder of Aiphone MASTER STATION AI-MS900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiphone MASTER STATION AI-MS900.
However, one of the most important roles played by the user manual is to help in solving problems with Aiphone MASTER STATION AI-MS900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiphone MASTER STATION AI-MS900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
