Instruction/ maintenance manual of the product MP-4200 Datavideo
Go to page of 46
MP- 4100/42 00 Mobile DVR INSTRUCTION GUI DE www.datavideo-t ek.com.
1 Table of con tents W a rning s and Pre caut ions ------------------ ------------------------- ------------------- 2 Radio and Te levision Int erf eren ce ----------------- --------------------------.
2 Warni ngs and Pr ec autions 1. Read all of these warni ngs and save them for later reference. 2. Follow all wa r nings and instructio ns m arked on this unit. 3. Unplug this uni t from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
3 Radio a nd Tele visio n Inter fer ence UNITED STATE S: The equipment described in this manual generates and uses radio frequency energy . If it is not installe d and us ed in accordance with the instructions in this manual, it may cause interference wit h radio and tel evision reception.
4 Tech suppor t It is our goal to mak e yo ur products ownership a satisfy ing experience. Our supporting staff is avail able to assist y ou in setting up and operating y our system. Please refer to our web site www. datavideo-tek.com f or answers to com mon questions, support requests or contact your local office below.
5 FEA TURES 20 se conds of pr e-eve nt reco rdi ng Stan d alone N ON- PC embed ded sy stem offeri ng ma ximum s tabi lity Simple , easy to use control & u ser interf ace Ne ar D V D q uali ty MPEG.
6 INSTALLA TION Co nnect a RMC- 110 10-K ey Remo te Contr ol key pad for sy stem c onfigur ation. N.B . Ensur e that your camer a connec ted and wo rking , or y ou wi ll ge t a “Vi deo Loss ” even t.
7 INSTALLA TION Co nnect a RMC- 80 5-Key Remote Contro l key pa d for the app licat ion in a v ehicl e. N.B . Ensur e that your camer a connec ted and wo rking , or y ou wi ll ge t a “Vi deo Loss ” even t.
8 Intr oducti on of RMC- 110 10-K ey Remote Control Ke y P ad 1. LCD: No Fu nction 2. Turn ON / OFF Main Menu 3. Start / E nd Ins tant recor ding, Stop playback, Switch to Monitoring s tate 4. Turn ON / OFF Main Menu 5. Turn ON / OFF Ev e nt List Menu 6.
9 Configure M P- 4100 by RM C-110 Check Box se rial n umber, firmw are version and Box I P address Press on t he “ME NU” key on RMC -100 to P op Up the “ Main Menu” . Sel ect “Info rmation ” and pr e ss on the key. You will enter th e Inf ormat ion men u.
10 Check Hard Disk Info, Vi deo System and Resolution Pres s on the key to pop up “Main Menu” Sel ect “Infor mation” and pr ess on th e key , you w ill enter th e Inform ation menu . Use the key to mov e the hig hlig ht and Sel ect “H ard Di sk Infor mation”.
11 Check Log Inform ati on Pres s on the key to pop up the “ Main Menu”. Sel ect “Infor mation” and pr ess on th e key to enter “Inf ormatio n menu”. Use the key to move the highlight and select “Log Inf ormatio n”. Pres s on the key.
12 Vide o reco rding s etting Pres s on the key to pop up “Main Menu” Use the key to mov e the hig hlig ht and se lect “ Recordi ng Sett ings ” Pres s on the key to e nter “Recor ding Settin gs” Menu Select “Reco rding Quality”, and then press Ent er key Us e the key to mov e around.
13 Recor ding Vide o Qua lity Recor ding Frame Ra te? . Rec ording Quality B it -rate Quality Level High 3Mbps Near-DVD qu ality Fine 2Mbps Super VCD quali ty Norm al 1.2Mbps V CD quality Low 800Kbps VCR-like quality Frame-rate (fps) Quality Desc ription 30fps_NTSC 25fps_PAL Completely sm ooth m otion after recording 10fps_NTSC 8.
14 Record ing Time in a 60GB or 80GB HDD The est imated r ecordi ng time on a 60GB HD D is abo ut 46 hour s with 30 fps (NT SC video) and hi ghest vide o rec ordin g qu ality (D1 r esoluti on of 704 x.
15 A la rm Settings Pres s on the key on RMC-110 t o pop up “Main Men u”. Use key to m ove the highlight and se lect “Recording Se ttings”. Pres s on the key to e nter “Recor ding Settin gs” Menu Use the key to mov e the hig hlig ht and se lect “A lar m Setti ngs”.
16 Chang e Ne tw ork I P an d MASK setti ngs Pres s the key on the RMC-110 Remot e key to pop up the Main Menu. Use the key to mov e the hig hlig ht and se lect “S y stem Sett ings” . Pres s on the key to e nter S ystem Setti ngs menu a nd sele ct “Conne ction Setti ngs”.
17 Use the key or key to e nable or d isable. On ce DHCP is e nabled , DVR can obtain the IP address automa tically from your DHCP server. Oth erwise, you need specif y the foll owi ng 3 i tems manua lly. Use the key or key to sp ecify the 32-bit I P address manua lly, if DHCP is disabled .
18 Forma t Har d Dis k? Press on t he “ME NU” key to pop up “ Main Menu”. Use key to m ove the highlight and se lect “System S ettings”. Pres s on the key to e nter “System Settings” m enu a nd select “F ormat Ha rd Disk”.
19 Change DV R Se rial Num ber Pres s on the key to pop up Main Me nu and use the key to move th e highlight. Select “System Sett ings” and pre ss on th e key to enter System Se ttings menu.
20 Set D VR Dat e and Ti me MP- 4100 us es ti me and date a s vide o index ther efore it ’s ver y imp ortant t o make sur e that yo ur sy stem time i s set co rrect ly w hen yo u firs t use it . Pro cedure t o set t he sy stem clock: Pres s on the key to pop up “ Main M enu” an d use t he key to move the highlight.
21 Set D ate There are 3 f ields f or ent ering: Year Us e the key to select a year bet ween 2000 -2016. Month Us e the key to sel ect a month betwe en 1-12. Dat e Us e the key to select a dat e between 1 -31. Set Time There are 2 f ields f or ent ering: Hour Use th e key to se lect an hour be tween 0-12 .
22 Basic Operation w ith RMC-80 Recor ding MP-4100 s upports In stant Re cording, Ala rm/Event Rec ording and V ideo Loss Record ing. You may a lwa ys use th e key on RMC-80 to start or end an instan t recording. W henev er an ev ent is de tected, syste m wil l star t the ev ent recor ding .
23 Remote M onit ori ng MP-4100 s upports re mote l ive monitoring, r ecording, playba ck, auto matic em ail alert a nd software up grade. To use these f eat ures, you n eed to co nnect yo ur DVR to In ternet o r local network, and setup t he Eth ernet Se ttings.
24 Netw ork settin g for M P-4100 an d the PC Connect the MP-41 00 to Inter net Netw ork *. Note: T o insta ll MP-4100 in the In ternet xDSL network, it requires a t least two f ixed IP from ISP, on e for the Rout er of xDSL mode m (Usually the xDSL Modem will build -in Router funct ion) the other on e for MP- 4100.
25 1. Se tup MP-4100 IP and MA SK Pres s the key on the RMC-110 Remot e key to pop up the Main Menu. Use the key to mov e the hig hlig ht and se lect “S y stem Sett ings” . Pres s on the key to e nter S ystem Setti ngs menu a nd sele ct “Conne ction Setti ngs”.
26 2. PC set up: Setup P C Netw ork IP and MASK.
27.
28 Launc h IE with the DVR IP address to c onnec t PC with MP-4100 thru Ethe rnet..
29 Event dow nloaded a nd view on PC th ru Eth ernet Operati on Proc edure Step1 : Connect MP-4100 Etherne t port to Intranet /Inter net Step 2: Laun ch IE with t he DVR IP a ddress f rom MP -4100 Ste.
30 Step 5: click on the Event list. Step 6: click on the mo use Right button and select Save Target AS..
31 Step 7: Click on t he “Save” Step 8: Pleas e wait to download complete mp eg file..
32 Step 9: Click on t he “Close” Step 10: Click on the “Bac k” to last p age.
33 Step 11: Click on the “Bac k” again to last page. Step1 2: on th e Main Pa ge, click on “Live Monitoring”.
34 Step1 3: Key in Us er Name: supe rvisor and Password: three Step1 4: Click on the mou se right but ton a nd selec t “Open”.
35 Step 15: Open an e vent file. Step 16 : Click on the “Play ” You wil l see the ev ent v ideo sh ow on pr eview wi ndows.
36 How to update fi rm w are 1. Connec t MP-4100 to Intran et and power on MP-4100 2. Lau nch IE i n PC w indow and conn ect to MP -4 100 thru the assig ned IP add ress Type in User name: su perv isor.
37 3. On mai n menu selec t " System A dm inistr atio n ", in " System Ad ministratio n" page, 4. Pr ess the b utton “Brow se r… " to fi nd the update software of “Flashi mg.
38 5. Click on the butt on 6. Select path to f ile Flashimg.ea p.
39 7. Ope n the f lashim g.eap 8. Press t he butto n " P ost th e fil e ".
40 9. Click on the “Yes” butt on W ait unt il the softwar e upload is fi nishe d as bel ow.
41 10. “ Foun d a new c ode, u pgra de? ” sho uld app ear on th e TV Mon itor; if i t does not, type the f ollowing address in IE's a ddress inpu t MP-410 0: http://192.168.1.175/cg i -bin/command.cgi?device=flash&command=upgrade¶m1 =a:flashimg.
42 A cces sories GPS Tex t Overlay Box (VP-364) Specif icat ion: *. Sup ports two RS-232 serial interf ace f or GPS Navigator commu nication and Rem ote control *. GPS comm unic ation Spe c: Proprietary protoc ol at 19200 bps, 8 Data bit, 1 Sto p bit, No P arity *.
43 Connect ing a GPS Text Overlay box in the s ystem GPS TEXT OVERLA Y BOX MP-4100 Re ar Pan el LCD Monit or GPS Navigator.
44 F.A .Q. 1. W hy does i t take a l ong time to r eboo t my DVR? The n ormal reb oot tim e shou ld be les s than 5 s econds. If you e xperienced a longer time on reboot, it might b e beca use your DHCP se rver couldn’t be fou nd. You should d isable DHCP in MP-410 0 unless you are certai n the DVR is conne cted to a DHCP se rv e r.
45 All the trad emark s are the properti es of their respective owners. Datavid eo T echnologies Co., Ltd. All rights reserved 2004 P/N: 082060362E 1.
An important point after buying a device Datavideo MP-4200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Datavideo MP-4200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Datavideo MP-4200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Datavideo MP-4200 you will learn all the available features of the product, as well as information on its operation. The information that you get Datavideo MP-4200 will certainly help you make a decision on the purchase.
If you already are a holder of Datavideo MP-4200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Datavideo MP-4200.
However, one of the most important roles played by the user manual is to help in solving problems with Datavideo MP-4200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Datavideo MP-4200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
