Instruction/ maintenance manual of the product QS6500 Datalogic Scanning
Go to page of 40
QuickScan ® QS6500 Handheld Bar Code Scanner Quick Reference Guide.
Datalogic Scanning, Inc. 959 T erry Street Eugene, Oregon 97402 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - A ll rights reserved.
Quick Reference Guide i Datalogic Scanning, Inc. QUICKSCAN ® END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product y ou have acquired contains embedded Soft - ware, which is integral to the product’ s operation. This Software is being pr ovided to you under license, subject to the te rms and conditions of this Agr eement.
ii QuickScan ® QS6500 3. T ransfers, Suppor t . 3.1 Any cop ying, installing, reproduction, re manufacture , reverse engineering, electronic transfer , or other use of the Software on other than the de signated Datalogi c Product will be a material breach of this Agreement.
Quick Reference Guide iii 7. Infringement . 7.1 Datalogic will def end End User against any claim in a lawsui t that the Datalogic Product furnished hereunder infringe a United States patent or copyri.
iv QuickScan ® QS6500 embedded software, End User ag rees to sign a waiver prepa red by Datalogic concerning further use of the embedded Software. End User’s resumed or continued use of the embedded Software after termi nation shall constitute End User’s ag reement to be bound by the terms and cond itions of this Agreement for such use.
Quick Reference Guide 1 Installation The QuickScan ® QS6500 linear imager is easy to install and use. The following figure sho ws the st eps to perform an installation. T urn off the host computer before connection. Consult the host terminal’ s manual if necessary .
2Q u i c k S c a n ® QS6500 How to Scan The figure below sho ws the right and wrong ways to scan a bar code. 1. The linear imager must be pointed at a slight angle to the bar code so that the light reflected off the bar code can be “ seen ” by the linear imager .
Quick Reference Guide 3 Troubleshooting If the linear imager is not operati ng properly , the follo wing checks should be performed: 1. Since the linear imager can receiv e its power from the host computer (P ower Off the T erminal—P .O.T .), it will not operate without the system power on.
4Q u i c k S c a n ® QS6500 7. Ensure that the linear imager's interface type is compatible with the host terminal by c onsulting your POS system man - ual and/or the linear imager’ s Product Refer ence Guide found on the CD included with your linear imager .
Quick Reference Guide 5 Installation Le lecteur de code à barres Linear Imager QS6500 est un linear imager de poche facile à utiliser . Le schéma suivant illustre la procédure d’installa - tion du imager . Eteignez l’ordinateur avant de connecter le imager .
6Q u i c k S c a n ® QS6500 Procédure de lecture Le dessin ci-dessous montre la bonne et la mauvaise façon de scanner un code à barres. 1. Le linear imager doit être légèrement incliné par rapport au code à barres afin que la lumière réfléchie sur le code peut êtr e vue par le linear imager .
Quick Reference Guide 7 Dépannage Si le linear imager ne fonctionne pas correctement, effectuez les vérifica - tions suivantes : 1. S i le lecteur est alimenté par l’ordinateur , ce dernier doit être sous tension.
8Q u i c k S c a n ® QS6500 7. Assurez-vous que le type d’interf ace du linear imager est compatible avec l’or dinateur , en consultant le manuel de ce dernier et/ou le Guide de référence du linear imager inclus dans le CD fourni avec le lecteur .
Quick Reference Guide 9 Installation Der QS6500 Linear Imager ist ein Handheld Scanner mit benutz erfre - undlichem Design. Anhand folgender Abbildung wir d in Schritten gezeigt, wie der Scanner installiert werden soll. Schalten S ie den Hos - trechner aus, bevor S ie den linear imager anschließen.
10 QuickScan ® QS6500 Für eine gültige Sicherheitszertifizierung müssen Klasse III Str omquellen am Eingang nach den Bestimmungen IEC/ EN60950-1 (EN 60335-Serien, EN 60065 oder entspr echenden) zugelassen sein. Eingang: 100 - 240 V AC A usgang: 9 - 10 VDC Max.
Quick Reference Guide 11 Problembehandlung Die folgenden T ests sollten durchgeführt werden, wenn der linear imager nicht einwandfrei funktioniert. 1. N achdem der linear imager durch den H ostrechner mit S trom ver - sorgt wird (P .O.T), kann das Gerät nicht ohne eine eingeschaltete Spannungsv ersorgung durch das System funktionieren.
12 QuickScan ® QS6500 7. Stellen S ie sicher , dass der Schnittstellentyp des linear imagers mit Ihrem H ost-T erminal kompatibel ist, indem Sie in Ihrem POS-Sys - temhandbuch und/oder in der linear imager P roduct Reference Guide nachschlagen, die sich auf der CD befinden, die mit dem lin - ear imager geliefert wurde.
Quick Reference Guide 13 Installazione Il QS6500 linear imager è un lettore portatile di facile utilizzo . La seguente figura illustra le fasi di installazione del linear imager . Spegner e il computer prima di collegare il linear imager . Se neces - sario, consultare il manuale fornito unitamente al computer .
14 QuickScan ® QS6500 Affinché il certificato di sicurezza sia valido, le sorgenti di alimen - tazione di classe III devono es sere conformi a IEC/EN60950-1 (serie EN 60335, EN60065 o relativi). T ensione ingresso: 100 - 240 V AC T ensione uscita: 9 - 10 VDC Consumo massimo: 2.
Quick Reference Guide 15 Risoluzione dei problemi Eseguire i seguenti controlli in caso di cattivo funzionamento del linear imager: 1. P oiché il linear imager è alimentato solo dal terminale (P .O.T . P ower Off the T erminal, alimentazione da termi - nale), esso non funziona quando il sistema è spento.
16 QuickScan ® QS6500 7. Assicurarsi che il tipo di interf accia del linear imager sia com - patibile con il terminale cons ultando il manuale del sistema POS utilizzato e/o la Guida di riferimento prodotto del lin - ear imager presente sul CD fornito con il linear imager .
Quick Reference Guide 17 Instalación El QS6500 linear imager para códigos de barras es un escáner manual muy fácil de utilizar . La siguiente figura muestra los pasos que se deben seguir para instalar el escáner . Ap ague la computadora host antes de conectar el linear imager .
18 QuickScan ® QS6500 La certificación de seguridad solame nte es válida si las enchufadas para fuente de alimentación clase III están aprobadas por IEC- EN60950-1 (serie EN 60335, EN 60065 o comparable). Enchufada 100-240 V AC Despacho 9 - 10 VDC Corriente máximo 2.
Quick Reference Guide 19 Solución de problemas Si el linear imager no funcíona adecuadamente, se deben realizar estas pruebras: 1. Dado que el linear imager puede alimentarse de la computadora host (Alimentación a través de la energía del terminal, “P .
20 QuickScan ® QS6500 sistema de punto de venta (POS) o la guía de refer encia de producto que viene en el CD provisto con el escaner . Si el linear imager no funciona de manera adecuado, comuníquese con su prov eedor local o con el Servicio de Atención al Cliente de Datalogic.
Quick Reference Guide 21 Instalação O QS6500 linear imager é um leitor portátil de fácil utilização. A figura seguinte mostra os passos para instalação do linear imager . Desligue o computador antes de conectar o linear imager . Consulte o manual do ter - minal caso necessário.
22 QuickScan ® QS6500 P ara o certificado de segurança eletrica ser válido, uma fonte de entrada de energia Classe III precisa ser appro vada como IEC/ EN60950-1 (EN 60335-serie, EN 60065 ou relevante). Entrada: 100 - 240 V c.a. Saída: 9 - 10 Vc.c.
Quick Reference Guide 23 Diagnóstico de Problemas Se o linear imager não estiver operan do adequadamente, as seguintes ver - ificações devem ser feitas: 1. V isto que o linear imager pode receber sua energia do terminal que o hospeda (P ower Off the T erminal—P .
24 QuickScan ® QS6500 o Guia de Referência do P roduto do linear imager , encontrado no CD incluso em seu linear imager . Caso o linear imager ainda não funcione corretamente, contate seu fornecedor local ou os Serviços de Suporte ao Cliente Datalogic.
快速参考指南 25 安装 QuickScan QS6500 线性扫描器安装和使用都十分容易。 下面的图演示的是安装步骤。在接线前首先关闭主计算 机。如果需要，请查阅主机终端手册。 1. 将连接电缆与线性扫描器相连。 2.
26 QuickScan ® QS6500 如何扫描 下图演示的是正确的和错误的扫描条码的方法。 1. 必须将线性扫描器以稍小的斜角对着条码扫描，这样 条码上反射的光才可以被线性扫描器 “看到” 。不要 将扫描器垂直对着条码。 2.
快速参考指南 27 如果系统电源没有接通，则扫描器就不能工作。 如果 线性扫描器使用外部电源，而外部电源出现故障，则 扫描器也不会工作。如果使用的是外部电源，换上完 好的电源，然后测试线性扫描器。 2.
28 QuickScan ® QS6500 如果线性扫描器仍然不能工作，与您当地的供应商或 Datalogic 的客户服务部联系。 符合法规之声明 该设备符合第 15 章的有关规定。其操作符合下列条件： 1. 该设备不会引发有害的干扰；并且 2.
インストール QuickScan ® QS6500リニアイメージャーは、 簡単にインストール、ご使用いただけます。以下の図はインス トール手順の説明です。接続す.
シリーズ、EN60065、もしくは同等)に承認されなければならな りません。 入力: 100 － 240 VAC 出力: 9 －10 VDC 最大. 電流: 2.0A 最大. 電力: 20W スキャンの仕方 以下の図は、バーコードの正しいスキャンの仕方と間違ったス キャンの仕方を説明しています。 1.
トラブルシューティング リニアイメージャーが正しく作動しない場合は、以下の確認作 業を行ってください。 1.
7. リニアイメージャーのインターフェイスのタイプがホスト ターミナルと互換性があるか確認します。確認方法は、PO Sシステムマニュアルを参照す.
DECLARA TION OF CONFORMITY Datalogic hereby declares that the Equi pment specified below has been tested and found compliant to the f oll owing Directiv es and Standards: Directives: 89/336/EEC EMC 73.
©2004-2007 Datalogic Scanning, Inc. 6/07 Aus t r a li a Datalogic Scanning Pty Ltd North Ryde, Australia T elephone: [61] (2) 9870 3200 F ax: [61] (2) 9878 8688 France and Benelux Datalogic Scanning Sarl LES ULIS Cedex, F rance T elephone: [33].01.64.
An important point after buying a device Datalogic Scanning QS6500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Datalogic Scanning QS6500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Datalogic Scanning QS6500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Datalogic Scanning QS6500 you will learn all the available features of the product, as well as information on its operation. The information that you get Datalogic Scanning QS6500 will certainly help you make a decision on the purchase.
If you already are a holder of Datalogic Scanning QS6500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Datalogic Scanning QS6500.
However, one of the most important roles played by the user manual is to help in solving problems with Datalogic Scanning QS6500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Datalogic Scanning QS6500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
