Instruction/ maintenance manual of the product I GD4100 Datalogic Scanning
Go to page of 324
Gr yphon ™ I GD4100 Linear I m ager Barc ode Reader P roduct Referenc e Guide .
Datalogic Scanning, Inc. 959 T err y Str eet Euge ne, Oregon 974 02 T eleph one: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All rights reserved.
Pr oduct Reference Guide 1 T able of C ont ents Introduction ............................................................................................. ...................... ................................................................... 7 About this Guide .
Contents 2 Gryphon™ I GD4100 RS-232/USB-Com Interfaces ................................................ ...................................................... .................................................... 59 Introduction .....................
Contents Pr oduct Reference Guide 3 Symbologies ......................................................................... ........................................... ................................ ............................ 127 Introduction ......
Contents 4 Gryphon™ I GD4100 Code 39 Check Character Transmission ................................................................ .......................... .............. ......................................... ..................................
Contents Pr oduct Reference Guide 5 Codabar Start/Stop Character Match ..................................................................... ....................... ................. ......................................... ..........................
Contents 6 Gryphon™ I GD4100 Control Character Emulation ................................................................ ................................... ...... .............................. ......................................... ...........
Pr oduct Reference Guide 7 Chapter 1 Intr oduc tion About this Guide This Product Reference Guide (PRG) is provided for users seeking advanced technical information, including connection, programming, maintenance and specifications.
Introduction 8 Gryphon™ I GD4100 Chapter 11, Data Ed iting offers advanced configuration options for cus tomization of scanned data output. Chapter 12, Symbologies defines options for all symbologies and provides the programming barcodes necessary for configuring these features.
Technical Support Pr oduct Reference Guide 9 T echnical Suppor t Datalogic W e bsite Support The Datalogic website ( www .scanning.datalogic.com ) is the complete source for technical support and information for Datalogic products.
Introduction 10 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 11 Chapter 2 Getting Star ted About the Reader Advancements in the LED technology used in this reader significantly improve the illumination of the target field of view, resulting in higher scan efficiency.
Getting Started 12 Gryphon™ I GD4100 Install the Inter face C able Connect the reader cable by inserting the cable into the handle as shown in Fi g u re 1 . To remove it, insert a paper clip into the release aperture , then unplug the ca ble. Figure 1.
Setting Up the Reader Pr oduct Reference Guide 13 Ke yboard W edge C onnec tion The Keyboard Wedge cable has a ‘Y’ connection from the reader . Connect the female to the male end from the keyboard and the remaining end at the keyboard port at the terminal/PC.
Getting Started 14 Gryphon™ I GD4100 Figure 5. Other Interface Connections U S B I B M K e y b o a r d W e d g e or ... or ... NO TE Pr ogr amming The reader is factory-configured with a set of default features standard.
Resetting the Standa rd Product Defaults Pr oduct Reference Guide 15 Selec t the Interface T ype Upon completing the physical connection between the reader and its host, proceed directly to "Inte.
Getting Started 16 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 17 Chapter 3 Int er faces Inter face Selec tion Each reader model will support one of the following sets of host interfaces: General P urpose Models RS-232 RS-232 OPOS USB Key.
Interfaces 18 Gryphon™ I GD4100 Table 1. Available Interfaces RS-232 FEA TURES RS-232 standard int er face Selec t RS2 32-STD Set RS-232 Interface Fe a t u r e s starting on page 51 Select RS232-WN RS-232 Wincor-Nix dorf RS-232 for use with OPOS/UPOS/Ja vaPOS Select RS-232 OPOS Sele ct U SB- C OM- STD a a.
Configuring the Interface Pr oduct Reference Guide 19 KEYBO ARD FEA TURES A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80 , 90 & 95 w/Standard Key Encoding Sel ect K BD -A T Set KEYBOA RD WEDGE Int.
Interfaces 20 Gryphon™ I GD4100 KEYBO ARD — cont. FEA TURES Keyboard W edge for IBM T erminals 31xx, 32xx, 34xx, 37xx make only keyboard Select KBD-IBM -M Set KE YBOARD WEDGE Interface F eatur es .
Global Interface Features Pr oduct Reference Guide 21 Global Inter fac e F eatures The following interface features are co nfigurable by all interface types.
Interfaces 22 Gryphon™ I GD4100 USB Suspend Mode This setting enables/disables the ab ility of USB interfaces to enter suspend mode. ENTER/EXIT PROGRAMMING MODE USB Suspend Mode = Disable USB Suspen.
Pr oduct Reference Guide 23 Chapter 4 General F eatures Double Read Timeout To prevent a double read of the same label, the Double Read Timeout sets the minimum time allowed between reads of labels of the same symbology and data.
General Features 24 Gryphon™ I GD4100 Double Read T imeout — c ontinued ENTER/EXIT PROGRAMMING MODE Double Read Timeout = 0.5 Second Double Read Timeout = 0. 6 Second Double Read Timeout = 0.7 Second Double Read Timeout = 0. 8 Second Double Read Timeout = 0.
Label Gone Timeout Pr oduct Reference Guide 25 Label Gone Timeout This feature sets the time after the last label segment is seen before the reader prepares for a new label. The timeout can be set within a range of 10 milliseconds to 2,550 milliseconds (2.
General Features 26 Gryphon™ I GD4100 Label Gone T imeout — c ont. ENTER/EXIT PROGRAMMING MODE Select La bel Gone Timeout Se tting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Sleep Mode Timeout Pr oduct Reference Guide 27 Sleep Mode Timeout Specifies the timeout value for the reader to enter low power Sleep Mode. When Sleep Mode is enabled the reader cannot receive commands from the Host or base station.
General Features 28 Gryphon™ I GD4100 Sleep Mode T imeout — co ntinued ENTER/EXIT PROGRAMMING MODE Sleep Mode Timeout = 5 Seconds Sleep Mode Timeout = 6 Seconds Sleep Mode Timeout = 7 Seconds Sleep Mode Timeout = 8 Seconds Sleep Mode Timeout = 9 Seconds Sleep Mode Timeout = 10 Seconds max.
LED and Beeper Indicators Pr oduct Reference Guide 29 LED and Beeper Indicators Pow e r O n A l e r t Disables or enables the indication (from the Beeper) that the reader is receiving power.
General Features 30 Gryphon™ I GD4100 Good Read: When to Indicate This feature specifies when t he reader will provide indication (beep and/or flash its green LED) upon successfully reading a barcode.
LED and Beeper Indicators Pr oduct Reference Guide 31 Good Read B eep T ype Specifies whether the good read beep has a mono or bitonal beep sound. ENTER/EXIT PROGRAMMING MODE Good Read Beep T ype = Mo.
General Features 32 Gryphon™ I GD4100 Good Read Beep Fr equency Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable from the list below. (Controls the beeper’s pitch/tone.) Good Read B eep Length Specifies the duration of a good read beep.
LED and Beeper Indicators Pr oduct Reference Guide 33 Good Read Beep Length — c ontinued ENTER/EXIT PROGRAMMING MODE Good Read Beep Length = 80 msec Good Re ad Beep Length = 100 msec Good Read Beep .
General Features 34 Gryphon™ I GD4100 Good Read B eep V olume Selects the beeper vol ume (loudness) upon a good read beep . There are three selectable volume levels.
LED and Beeper Indicators Pr oduct Reference Guide 35 Good Read LED Duration This feature specifies the amount of time that the Good Read LED remains on following a good read. The good read LED on time can be set within a range of 10 milliseconds to 2,550 milliseconds (0.
General Features 36 Gryphon™ I GD4100 Good Read LED Dura tion — con t. ENTER/EXIT PROGRAMMING MODE Select G ood Read LED Duration Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Scanning Features Pr oduct Reference Guide 37 Scanning F eatures Scan Mode Selects the scan operating mode for the reader. Selections are: T rigger Single.
General Features 38 Gryphon™ I GD4100 Scan Mode — continued ENTER/EXIT PROGRAMMING MODE Scan Mode = T rigger Single Scan Mode = T rigger Hold Multiple Scan Mode = T rigger Pulse Multiple Scan Mode.
Scanning Features Pr oduct Reference Guide 39 Stand Mode T riggered Timeout This feature specifies the time to remain in Tr i g g e r S i n g l e mode after the trigger is pulled while in Stand Mode . NO TE ENTER/EXIT PROGRAMMING MODE Stand Mode T rigger ed Timeout = 0.
General Features 40 Gryphon™ I GD4100 Stand Mode T riggered T imeout — continued ENTER/EXIT PROGRAMMING MODE Stand Mode T rigger ed Timeout = 6 Seconds Stand Mode T riggered Timeout = 8 Seconds St.
Scanning Features Pr oduct Reference Guide 41 Stand D ete c tion Specifies the behavior of the scanner when placed in a stand that contains autorecognition hardware.
General Features 42 Gryphon™ I GD4100 Scanning Activ e Time This setting specifies the amount of time that the reader stays in scan ON state once the state is entered. The range for this setting is from 1 to 255 seconds in 1-second increments. Follow these instructions to set this feature: 1.
Scanning Features Pr oduct Reference Guide 43 Scanning Active T ime — con t. ENTER/EXIT PROGRAMMING MODE Select Scanning Ac tive Time Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
General Features 44 Gryphon™ I GD4100 F lash On Time This feature specifies the ON time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. Follow these instructions to set this feature.
Flash On Time Pr oduct Reference Guide 45 Fla s h O n Tim e — cont . ENTER/EXIT PROGRAMMING MODE Select Flash ON Time Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
General Features 46 Gryphon™ I GD4100 F lash Off Time This feature specifies the OFF time for the indicator LED while in Flash Mode. The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. Follow these instructions to set this feature.
Stand Mode Sensitivity Pr oduct Reference Guide 47 Flash Off T ime — cont . Stand Mode Sensitivity Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high. ENTER/EXIT PROGRAMMING MODE Select Flash OFF Time Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
General Features 48 Gryphon™ I GD4100 Stand Det ec tion Specifies the behavior of the scanner when placed in a stand that contains autorecognition hardware.
Green Spot Duration Pr oduct Reference Guide 49 Green Spot Dur ation Specifies the duration of the good read pointer beam after a good read. ENTER/EXIT PROGRAMMING MODE Green Spot Dura tion = Disable .
General Features 50 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 51 Chapter 5 RS-232 ONL Y Inter fac e Introduc tion Use the programming barcodes in this chapter if modifications to the standard RS-232 interface settings are necessary to meet your system’s re quirements.
RS-232 ONLY Interface 52 Gryphon™ I GD4100 Baud Rate Baud rate is the number of bits of data transmitt ed per second. Set the reader's baud rate to match the baud rate setting of the host device. With an improper baud rate setting, data may not reach the host correctly.
Baud Rate Pr oduct Reference Guide 53 Baud Rate — con tinued ENTER/EXIT PROGRAMMING MODE Baud Rate = 9600 Baud Rate = 19,200 Baud Rate = 38,400 Baud Rate = 57,600 Baud Rate = 115,200 DEF A UL T.
RS-232 ONLY Interface 54 Gryphon™ I GD4100 Data Bits This parameter allows the reader to interface with devices requiring a 7-bit or 8-bit ASCII protocol for sending and receiving data.
Stop Bits Pr oduct Reference Guide 55 Stop Bits The stop bit(s) at the end of each trans mitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream.
RS-232 ONLY Interface 56 Gryphon™ I GD4100 P arity This feature specifies parity required for sending and receiving data. A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements.
Handshaking Control Pr oduct Reference Guide 57 Handshaking Con trol The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Handshaking Control includes the following options: • R TS — R TS is asserted during transmissions.
RS-232 ONLY Interface 58 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 59 Chapter 6 RS -232/USB - C om In ter faces Introduc tion The programming barcodes in this chapter allow modifications to the standard RS-232 and USB-Com interfaces. Standard F ac tor y S ettings Reference Appendix C, Standar d Defaults for a listing of standard factory settings.
RS-232/USB-Com Interfaces 60 Gryphon™ I GD4100 Interchar ac ter Dela y This parameter specifies the intercharacter de lay be tween the end of one character and the beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments.
Intercharacter Delay Pr oduct Reference Guide 61 Interchar acter Delay — cont . ENTER/EXIT PROGRAMMING MODE Inter character Dela y = No Delay Sele ct In t er ch ar act er De la y Se tti ng Make a mistake? Scan the CANCEL barcode to abort and not save the entr y string.
RS-232/USB-Com Interfaces 62 Gryphon™ I GD4100 Beep On ASCII BEL When this parameter is enabled, the reader issues a beep when a <BEL> character is detected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal entry or other important event.
ACK NAK Options Pr oduct Reference Guide 63 A CK NAK Options This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol. When configured, the reader and/or host sends an “ACK” when it receives data properly, and sends “NAK” when the data is in error.
RS-232/USB-Com Interfaces 64 Gryphon™ I GD4100 A CK Charac ter This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII characters or any hex value from 0 to 0xFF can be selected. NO TE To set this feature: 1. Determine the desired character or value.
ACK NAK Options Pr oduct Reference Guide 65 A CK Character — cont. ENTER/EXIT PROGRAMMING MODE Select ACK Character Setting DEF A UL T 0x06 ‘ACK’ Character.
RS-232/USB-Com Interfaces 66 Gryphon™ I GD4100 NAK Character This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII characters or any hex value from 0 to 0xFF can be selected. NO TE To set this feature: 1. Determine the desired character or value.
ACK NAK Options Pr oduct Reference Guide 67 NAK Character — cont. ENTER/EXIT PROGRAMMING MODE Select NAK Charac ter Setting DEF A UL T 0x15 ‘NAK’ Character.
RS-232/USB-Com Interfaces 68 Gryphon™ I GD4100 A CK NAK Timeout V alue This option specifies the amount of time the reader waits for an ACK character from the host following label transmission. The selectable timeout range is 200 milliseconds to 15,000ms (15 seconds) in 200ms increments.
ACK NAK Options Pr oduct Reference Guide 69 A CK NAK T imeout V alue — con t. ENTER/EXIT PROGRAMMING MODE Select ACK NAK Timeout V alue Set ting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
RS-232/USB-Com Interfaces 70 Gryphon™ I GD4100 A C K NAK Retr y C ount This feature specifies the number of times the reader retries a label transmission due to a retry condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and a selection of 255 specifies unlimited retries.
ACK NAK Options Pr oduct Reference Guide 71 A CK NAK Retry Count — con t. ENTER/EXIT PROGRAMMING MODE Select ACK NAK Retr y Count Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
RS-232/USB-Com Interfaces 72 Gryphon™ I GD4100 A CK NAK Error Handling This feature specifies the method the reader uses to handle receive errors detected while waiting for an ACK character from the host.
Indicate Transmission Failure Pr oduct Reference Guide 73 Indicat e T ransmission F ailure This option enables/disables the reader’s ability to sound an error beep to indicate a transmission failure.
RS-232/USB-Com Interfaces 74 Gryphon™ I GD4100 Disable Character Specifies the value of the RS-232 host command used to disable the reader. ASCII characters or any hex value from 0 to 0xFF can be selected. NO TE To set the value: 1. Determine the desired character or value.
Disable Character Pr oduct Reference Guide 75 Disable Character — cont . ENTER/EXIT PROGRAMMING MODE Select Disa ble Character Setting DEF A UL T 0x44 = Disable Character is ‘D’.
RS-232/USB-Com Interfaces 76 Gryphon™ I GD4100 Enable Character Specifies the value of the RS-232 host command used to enable the reader. ASCII characters or any hex value from 0 to 0xFF can be selected. NO TE To set this feature: Determine the desired character or value.
Enable Character Pr oduct Reference Guide 77 Enable Character — cont . ENTER/EXIT PROGRAMMING MODE Select Enab le Character Setting DEF A UL T 0x45 = Enable Character is ‘E’.
RS-232/USB-Com Interfaces 78 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 79 Chapter 7 K eyboar d Inter face Introduc tion Use the programming barcodes in this chapter to select options for USB Keyboard and Wedge Interfaces. Standard F ac tor y S ettings Reference Appendix C, Standar d Defaults for a listing of standard factory settings.
Keyboard Interface 80 Gryphon™ I GD4100 Country Mode This feature specifies the country/language supported by the keyboard. Only the following interfaces support ALL Country Modes.
Country Mode Pr oduct Reference Guide 81 C ountry Mode — continued ENTER/EXIT PROGRAMMING MODE Country Mode = Denmark Supports only the inter faces listed in the C ountry Mode featur e description. Coun try Mode = Franc e Co untry Mode = Germany Supports only the inter faces listed in the C ountry Mode fea- ture description.
Keyboard Interface 82 Gryphon™ I GD4100 C ountry Mode — continued ENTER/EXIT PROGRAMMING MODE Country Mode = Poland Supports only the inter faces listed in the C ountry Mode featur e description. Supports only the inter faces list ed in the Country Mode fea- ture description.
Caps Lock State Pr oduct Reference Guide 83 Cap s Loc k St at e This option specifies the format in which the reader sends character data. This applies to keyboard wedge interfaces. This does not apply when an alternate key encoding keyboard is selected.
Keyboard Interface 84 Gryphon™ I GD4100 Send C ontrol Char acters This feature Specifies how the reader transmits ASCII control char acters to the hos t. Reference Appendix F , Scancode T ables for more information about control characters. Options are as follows: C ontrol Character 00 .
Wedge Quiet Interval Pr oduct Reference Guide 85 W edge Quiet Interval This option specifies the amount of time to look for keyboard activity before the reader breaks the keyboard connection in order to transmit data to host. The selectable range for this feature is from 0 to 990ms in 10ms increments.
Keyboard Interface 86 Gryphon™ I GD4100 W edge Quiet Inter val — con t. 6 Scan ENTER/EXIT PROGRAMMING MODE ENTER/EXIT PROGRAMMING MODE Selec t Wedge Quiet Interval Set ting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Intercharacter Delay Pr oduct Reference Guide 87 Interchar ac ter Dela y This parameter specifies the intercharacter de lay be tween the end of one character and the beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments.
Keyboard Interface 88 Gryphon™ I GD4100 Interchar acter Delay — con t. ENTER/EXIT PROGRAMMING MODE Inter character Dela y = No Delay Selec t Intercharacter D elay Setting Make a mistake? Scan the CANCEL barcode to abort and not save the entr y string.
Intercode Delay Pr oduct Reference Guide 89 Interc ode Delay Specifies the delay between labels transmitted to t he host for this interface. The selectable range for this feature is from 0 to 99 seconds. Follow these instructions to set this feature: 1.
Keyboard Interface 90 Gryphon™ I GD4100 Interc ode Delay — c o nt. ENTER/EXIT PROGRAMMING MODE Set Intercode Delay Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
USB Keyboard Speed Pr oduct Reference Guide 91 USB K e yboard Speed This option specifies the USB poll rate for a USB keyboard. NO TE ENTER/EXIT PROGRAMMING MODE USB Keyboard Speed = 1ms USB Keyboard Speed = 2ms USB Keyboard Speed = 3ms USB Keyboard Speed = 4ms USB Keyboard Speed = 5ms This feature applies ONL Y to the USB K eyboard interface.
Keyboard Interface 92 Gryphon™ I GD4100 USB K eyboard Speed — c ontinued ENTER/EXIT PROGRAMMING MODE USB Keyboard Speed = 6ms USB Keyboard Speed = 7ms USB Keyboard Speed = 8ms USB Keyboard Speed =.
Pr oduct Reference Guide 93 Chapter 8 USB - OEM Inter face Introduc tion Feature settings for USB interfaces differ depending upon which host type the reader will be connected with. Use the feature settings in this chapter and Chapter 9, IBM 46X X Inter face to specifically configure for the US B-OEM interface.
USB-OEM Interface 94 Gryphon™ I GD4100 USB-OEM Devic e U sage The USB-OEM protocol allows for the reader to be identified as one of two different types of barcode scanners. Depending on what other scanners you may already have connected to a USB-OEM POS, you may need to change this setting to enable all devices to communicate.
Pr oduct Reference Guide 95 Chapter 9 IBM 46X X Inter face Introduc tion Use the barcodes in this section to configure programmable features for available IBM 46XX interfaces. IBM Standard F a c tor y S ettings Reference Appendix C, Standar d Defaults for a listing of standard factory settings.
IBM 46XX Interface 96 Gryphon™ I GD4100 46xx Number of Host Resets Specifies how many consecutive resets are processed before the reader starts a five-second period to allow the user to enter Programming Mode and configure the reader. The configurable range for this feature is 1 to 15 resets.
ENTER/EXIT PROGRAMMING MODE 46xx Number of Hos t Resets = 7 46xx Number of Hos t Resets = 8 46xx Number of Hos t Resets = 9 46xx Number of Host Resets = 10 46xx Number of Host Resets = 11 46xx Number of Host Resets = 12 46xx Number of Host Resets Pr oduct Reference Guide 97 46xx Number of Host Resets — c ont.
ENTER/EXIT PROGRAMMING MODE 46xx Number of Host Resets = 13 46xx Number of Host Resets = 14 46xx Number of Host Resets = 15 IBM 46XX Interface 98 Gryphon™ I GD4100 46xx Number of Host Resets — c ont.
Transmit Labels in Code 39 Format Pr oduct Reference Guide 99 T ransmit Labels in C ode 39 F ormat This feature enable/disables translation to Code 39 before transmitting label data to an IBM- 46XX or a USB-OEM host. Only the symbology identifier is modified for the translation.
IBM 46XX Interface 100 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 101 Chapter 10 W and Emulation Inter face Introduc tion This chapter provides feature/settings configuration for the Wand Emulation interface. W and Emulation Standard F ac tor y Settings Reference Appendix C, Standar d Defaults for a listing of standard factory settings.
Wand Emulation Interface 102 Gryphon™ I GD4100 W and P olarity This option specifies the polarity of the Wand output signal. Choices are: • Quiet zones and spaces ar e high, bars are lo w • Quie.
Wand Signal Speed Pr oduct Reference Guide 103 W and Signal Speed This feature specifies the speed of the Wand output signal per nominal bar or space. Choices are: • 330 microseconds • 660 microseconds NO TE ENTER/EXIT PROGRAMMING MODE W a nd Signal Speed = 330ms W and Signal Speed = 660ms TTL logic levels: 0 V <= Low <= 0.
Wand Emulation Interface 104 Gryphon™ I GD4100 Label S ymbology C on version When this feature is enabled for the Wand Emulation interface, all barcode labels are converted to a single symbology.
Transmit Noise Pr oduct Reference Guide 105 T ransmit Noise This option specifies the leading/trailing noise for the Wand interface. Choices are: • Disable (no leading/trailing noise) • Enable.
Wand Emulation Interface 106 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 107 Chapter 11 Data Editing Data E diting Ov er view When a barcode is scanned, additional information can be sent to the host computer along with the barcode data. This combination of barcode data and supplementary user-defined data is called a “message string.
Data Editing 108 Gryphon™ I GD4100 Please K eep In Mind ... • M odifying a message string is not a mandatory requirement. Data editing is sophisticated feature allowing highly customizable output for advanced users. F actor y default settings for data editing is typically set to NONE.
Global Prefix/Suffix Pr oduct Reference Guide 109 5. If less than the expected string of 20 characters ar e selected, scan the ENTER/EXIT bar- code to terminate the string.
Data Editing 110 Gryphon™ I GD4100 Global AIM ID AIM label identifiers (as opposed to custom characters you select yourself as with label identifiers) can be included with scanned barcode data. AIM label identifiers consist of three characters as follows: • A close brace character (ASCII ‘]’), follo wed b y .
Global AIM ID Pr oduct Reference Guide 111 Global AIM ID — c o ntinued ENTER/EXIT PROGRAMMING MODE Global AIM ID = Disable Global AIM ID = Enable DEF A UL T.
Data Editing 112 Gryphon™ I GD4100 GS1-128 AIM ID If Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled inde- pendently. The AIM ID for GS1-128 is a ]C1, ]C2 or ]C3. AIM IDs for other symbologies can be enabled/disabled independently as well.
Label ID Pr oduct Reference Guide 113 Label ID A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01- 0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following the transmitted barcode data depending upon how this option is enabled.
Data Editing 114 Gryphon™ I GD4100 CODE39 * 2A0000 V 560000 CODE4 4 340000 4 340000 CODE5 j 6A0000 j 6A0000 CODE93 & 260000 U 550000 GS1 D A T ABAR OMNIDIRECTIONAL R4 523400 u 750000 GS1 D A T A.
Label ID Pr oduct Reference Guide 115 Label ID: Set Individually P er S ymbology To configure a Label ID individually for a single symbology: 1. Scan the ENTER/EXIT barcode.
Data Editing 116 Gryphon™ I GD4100 Label ID — con tinued Table 18 STEP A CTION EXAMPLES 1. Scan the ENTER/EXIT barc ode (Scanner enters Pr ogramming Mode) 2.
Label ID Pr oduct Reference Guide 117 Label ID — con tinued Label ID C ontrol This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbology type.
Data Editing 118 Gryphon™ I GD4100 Label ID — con tinued Label ID Symbology Selection This option selects the symbology for which a Label ID is to be configured.
Label ID Pr oduct Reference Guide 119 Label ID — con tinued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured.
Data Editing 120 Gryphon™ I GD4100 Label ID — con tinued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured.
Label ID Pr oduct Reference Guide 121 Label ID — con tinued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured.
Data Editing 122 Gryphon™ I GD4100 Label ID — con tinued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured.
Label ID Pr oduct Reference Guide 123 Label ID — con tinued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured.
Data Editing 124 Gryphon™ I GD4100 Case C on version This feature allows conversion of the case of all alphabetic characters to upper or lower case. NO TE ENTER/EXIT PROGRAMMING MODE DEF A UL T Case.
Character Conversion Pr oduct Reference Guide 125 Character C onv ersion Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs represented in hexadecimal ASCII values. The first character in the pair is the character that will be converted.
Data Editing 126 Gryphon™ I GD4100 Character C on version — c ontinued ENTER/EXIT PROGRAMMING MODE Configure Character Conv ersion DEF A UL T 0xFFFFFFFFFFFFF FFF.
Pr oduct Reference Guide 127 Chapter 12 S ymbologies Introduc tion The reader supports the following symbologies (barcode types). Options for each symbology are included in this chapter.
Symbologies 128 Gryphon™ I GD4100 Co u p o n Co n t r o l This feature is used to control the reader’s method of processing coupon labels. Options are: • Disable coupon decoding • Enable UPC/EAN coupon decoding • Enable GS1 DataBar coupon decoding To set this feature: 1.
UPC-A Pr oduct Reference Guide 129 UPC-A The following options apply to the UPC-A symbology. UPC-A Enable/Disable When disabled, the reader will not re ad UPC-A barcodes. ENTER/EXIT PROGRAMMING MODE UPC-A = Disable UPC-A = Enable UPC-A Check Character T ransmission Enable this option to transmit the check character along with UPC-A barcode data.
Symbologies 130 Gryphon™ I GD4100 UPC-A — cont . Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13.
UPC-A Pr oduct Reference Guide 131 UPC-A — cont . UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC-A label must be decoded before it is accepted as good read.
Symbologies 132 Gryphon™ I GD4100 UPC-E The following options apply to the UPC-E symbology. UPC-E Enable/Disable When disabled, the reader will not read UPC-E barcodes. ENTER/EXIT PROGRAMMING MODE UPC-E = Disable UPC-E = Enable UPC-E Check Character T ransmission Enable this option to transmit the check character along with UPC-E barcode data.
UPC-E Pr oduct Reference Guide 133 UPC-E — cont. Expand UPC-E to EAN-13 Expands UPC-E data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13.
Symbologies 134 Gryphon™ I GD4100 UPC-E — cont. UPC-E Number S yst em Character T ransmission This feature enables/disables transmission of the UPC-E system number character.
UPC-E Pr oduct Reference Guide 135 UPC-E — cont. UPC-E Minimum Reads This feature specifies the minimum number of consecutive times a UPC-E label must be decoded before it is accepted as good read.
Symbologies 136 Gryphon™ I GD4100 GTIN F ormatting This feature enables/disables the ability to convert UP C-E, UPC-A, EAN 8, and EAN 13 labels into the GTIN 14-character format.
EAN 13 Pr oduct Reference Guide 137 EAN 13 The following options apply to the EAN 13 (Jan 13) symbology. EAN 13 Enable/Disable When disabled, the reader will not read EAN 13/JAN 13 barcodes.
Symbologies 138 Gryphon™ I GD4100 EAN 13 — cont . EAN-13 F lag 1 Character Enables/disables transmission of an EAN/JAN13 Flag1 character. The Flag 1 character is the first character of the label.
EAN 13 Pr oduct Reference Guide 139 EAN-13 ISBN C on v ersion This option enables/disables conversion of EAN 13/JAN 13 Bookland labels starting with 978 to ISBN labels.
Symbologies 140 Gryphon™ I GD4100 EAN 13 — cont . EAN 13 Minimum Reads This feature specifies the minimum number of consecut ive times an EAN 13 label must be decoded before it is accepted as good read.
EAN 8 Pr oduct Reference Guide 141 EAN 8 The following options apply to the EAN 8 (Jan 8) symbology. EAN 8 Enable/Disable When disabled, the reader will not read EAN 8/JAN 8 barcodes.
Symbologies 142 Gryphon™ I GD4100 EAN 8 — cont . Expand EAN 8 to EAN 13 Enable this option to expand EAN 8/JAN 8 labels to EAN 13/JAN 13. ENTER/EXIT PROGRAMMING MODE Expand EAN 8 to EAN 13 = Disab.
EAN 8 Pr oduct Reference Guide 143 EAN 8 — cont . EAN 8 Minimum Reads This feature specifies the minimum number of consecutive times an EAN 8 (Jan 8) label must be decoded before it is accepted as good read.
Symbologies 144 Gryphon™ I GD4100 UPC/EAN Global Settings This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8 symbologies, and affects all of these unless otherwise marked for each feature description.
UPC/EAN Global Settings Pr oduct Reference Guide 145 UPC/EAN Global Settings — cont . UPC/EAN Decoding L ev el — con t. ENTER/EXIT PROGRAMMING MODE UPC/EAN Decoding Lev el = 1 UPC/EAN Decoding Lev.
Symbologies 146 Gryphon™ I GD4100 UPC/EAN Global Settings — cont . UPC/EAN C orrela tion When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
UPC/EAN Global Settings Pr oduct Reference Guide 147 UPC/EAN Global Settings — cont . UPC/EAN Pric e W eight Check This feature enables/disables calculation and verification of price/weight check digits.
Symbologies 148 Gryphon™ I GD4100 UPC/EAN Global Settings — cont . In-Stor e Minimum Reads This feature specifies the minimum number of consecut ive times an in-store label must be decoded before it is accepted as good read.
Add-Ons Pr oduct Reference Guide 149 A dd-Ons The following features apply to optional add-ons. NO TE Optional A dd-ons The reader can be enabled to optionally read the following add-ons (supplemental.
Symbologies 150 Gryphon™ I GD4100 Add-Ons — con t. Optional Add-ons — cont . ENTER/EXIT PROGRAMMING MODE Optional Add-Ons = Enable P5 Optional Add-Ons = Disable GS1-128 Optional Add-Ons = Enable.
Add-Ons Pr oduct Reference Guide 151 Add-Ons — con t. Optional Add-On T i mer This option sets the time the reader will look for an add-on wh en an add-on fragment has been seen and optional add-ons are enabled. (Also see "Optional GS1-128 Add-On Timer"on page 154 .
Symbologies 152 Gryphon™ I GD4100 Add-Ons — con t. Optional Add-On T imer — cont . ENTER/EXIT PROGRAMMING MODE Optional Add-on Timer = 60ms Optional Add-on Timer = 70ms Optional Add-on Timer = 1.
Add-Ons Pr oduct Reference Guide 153 Add-Ons — con t. Optional Add-On T imer — cont . ENTER/EXIT PROGRAMMING MODE Optional Add-on Timer = 180ms Optional Add-on Timer = 200ms Optional Add-on Timer .
Symbologies 154 Gryphon™ I GD4100 Add-Ons — con t. Optional GS1-128 Add-On T imer This option sets the timer expiration value to read th e added part after reading the linear EAN/ UPC part. For UPC/EAN add-ons other than those of that type, see "Optional Add-On Timer"on page 151 .
Add-Ons Pr oduct Reference Guide 155 Add-Ons — con t. Optional GS1-128 Add-On T imer — c ont . ENTER/EXIT PROGRAMMING MODE Optional GS1-128 Add-O n Timer = 60ms Optional GS1-128 Add-On Timer = 70m.
Symbologies 156 Gryphon™ I GD4100 Add-Ons — con t. Optional GS1-128 Add-On T imer — c ont . ENTER/EXIT PROGRAMMING MODE Optional GS1-128 Add-On Timer = 180ms Optional GS1-128 Add-On Timer = 200m.
Add-Ons Pr oduct Reference Guide 157 Add-Ons — con t. P2 A dd-Ons Minimum Reads This feature specifies the minimum number of times a P2 add-on must be read before it is marked as valid and then comb.
Symbologies 158 Gryphon™ I GD4100 Add-Ons — con t. P5 A dd-Ons Minimum Reads This feature specifies the minimum number of times a P5 add-on must be read before it is marked as valid and then combi.
Add-Ons Pr oduct Reference Guide 159 Add-Ons — con t. GS1-128 A dd-Ons Minimum Reads This feature specifies the minimum number of times an GS1- 128 add-on must be read before it is marked as valid a.
Symbologies 160 Gryphon™ I GD4100 GS1 DataBar™ Omnidirectional The following options apply to the GS1 DataBar™ Omnidirectional (formerly RSS-14) symbology. GS1 DataBar™ Omnidirectional Enable/Disable When disabled, the reader will not read GS1 DataBar™ Omnidirectional barcodes.
GS1 DataBar™ Omnidirectional Pr oduct Reference Guide 161 GS1 DataBar™ Omnidirectional — cont. GS1 DataBar™ Omnidirectional Minimum Reads This feature specifies the minimum number of consecuti.
Symbologies 162 Gryphon™ I GD4100 GS1 DataBar™ Expanded The following options apply to the GS1 DataBar™ Expanded (formerly RSS Expanded) symbology. GS1 DataBar™ Expanded Enable/Disable When disabled, the reader will not read GS1 DataBar™ Expanded barcodes.
GS1 DataBar™ Expanded Pr oduct Reference Guide 163 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded Minimum Reads This feature specifies the minimum number of consecutive times a GS1 DataBa.
Symbologies 164 Gryphon™ I GD4100 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded L ength C ontrol This feature specifies either variable length decoding or fixed length decoding for the GS1 DataBar™ Expanded symbology. V ariable Length.
GS1 DataBar™ Expanded Pr oduct Reference Guide 165 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded Set Length 1 This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded L ength Con trol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g t h Mode.
Symbologies 166 Gryphon™ I GD4100 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded Set Length 1 — c ont. ENTER/EXIT PROGRAMMING MODE Selec t GS1 Data Bar™ Expanded Set Length 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
GS1 DataBar™ Expanded Pr oduct Reference Guide 167 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded Set Length 2 This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded L ength Con trol . Length 2 is the maximum label length if in V ariable Length Mode, or the second fixed length if in Fixe d Le n g th Mode.
Symbologies 168 Gryphon™ I GD4100 GS1 DataBar™ Expanded — cont. GS1 DataBar™ Expanded Set Length 2 — c ont. ENTER/EXIT PROGRAMMING MODE Selec t GS1 Data Bar™ Expanded Set Length 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
GS1 DataBar™ Limited Pr oduct Reference Guide 169 GS1 DataBar™ Limited The following options apply to the GS1 DataBar™ Limited (formerly RSS Limited) symbology. GS1 DataBar™ Limited Enable/Disable When disabled, the reader will not read GS1 DataBar™ Limited barcodes.
Symbologies 170 Gryphon™ I GD4100 GS1 DataBar™ Limited — cont. GS1 DataBar™ Limited Minimum Reads This feature specifies the minimum number of co nsecutive times a GS1 DataBar™ Limited label.
Code 39 Pr oduct Reference Guide 171 C ode 39 The following options apply to the Code 39 symbology. C ode 39 Enable/Disable When disabled, the reader will not read Code 39 barcodes.
Symbologies 172 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Check Char acter Calculation Enable this option to enables/disables calculation and verification of an optional Code 39 check character.
Code 39 Pr oduct Reference Guide 173 C ode 39 — cont . C ode 39 Check Char acter T ransmission Enable this option to transmit the check character along with Code 39 barcode data.
Symbologies 174 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 F ull ASCII In Code 39 decoding, this enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters.
Code 39 Pr oduct Reference Guide 175 C ode 39 — cont . C ode 39 Quiet Zones This feature specifies the number of quiet zones for Cod e 39 labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 time s the width of the narrowest bar or space in the label.
Symbologies 176 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Minimum Reads This feature specifies the minimum number of consecut ive times a Code 39 label must be decoded before it is accepted as good read.
Code 39 Pr oduct Reference Guide 177 C ode 39 — cont . C ode 39 Decoding L e ve l Decoding Levels are used to configure a barc ode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs.
Symbologies 178 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Decoding Le v el — con t. ENTER/EXIT PROGRAMMING MODE Code 39 Dec oding Lev el = 1 Code 39 Decoding Level = 2 Code 39 Dec oding Lev e.
Code 39 Pr oduct Reference Guide 179 C ode 39 — cont . C ode 39 L ength C ontrol This feature specifies either variable length decoding or fixed length decoding for the Code 39 symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Symbologies 180 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Set Length 1 This feature specifies one of the barcode lengths for C ode 39 L ength Con trol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g th Mode.
Code 39 Pr oduct Reference Guide 181 C ode 39 — cont . Code 39 Set L ength 1 — cont. ENTER/EXIT PROGRAMMING MODE Selec t Code 39 Set Length 1 Settin g Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 182 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Set Length 2 This feature specifies one of the barcode lengths for C ode 39 L ength Con trol . Length 2 is the maximum label length if in Va r i a b l e L e n g t h Mode, or the second fixed length if in Fi xed Le n g t h Mode.
Code 39 Pr oduct Reference Guide 183 C ode 39 — cont . Code 39 Set L ength 2 — cont. ENTER/EXIT PROGRAMMING MODE Selec t Code 39Length 2 Settin g Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 184 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Inter digit Ratio This feature specifies the ratio between an intercharacter space and module for Code 39 labels.
Code 39 Pr oduct Reference Guide 185 C ode 39 — cont . Code 39 Interdigit Ratio — cont. ENTER/EXIT PROGRAMMING MODE Code 39 Interdigit Ratio = 6 Code 39 Inter digit Ratio = 7 Code 39 Interdigit Ra.
Symbologies 186 Gryphon™ I GD4100 C ode 39 — cont . C ode 39 Char acter Correla tion When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Code 39 Pr oduct Reference Guide 187 C ode 39 Stit ching This option enables/disables stitching for Code 39 labels. When parts of a Code 39 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met.
Symbologies 188 Gryphon™ I GD4100 C ode 32 The following options apply to the Code 32 (Italian Pharmaceutical Code) symbology. C ode 32 Enable/Disable When disabled, the reader will not read Code 32 barcodes.
Code 32 Pr oduct Reference Guide 189 C ode 32 — cont . C ode 32 Check Char acter T ransmission Enable this option to transmit the check character along with Code 32 barcode data.
Symbologies 190 Gryphon™ I GD4100 C ode 128 The following options apply to the Code 128 symbology. C ode 128 Enable/Disable When disabled, the reader will not read Code 128 barcodes.
Code 128 Pr oduct Reference Guide 191 C ode 128 — cont . C ode 128 Check Char ac ter T ransmission Enable this option to transmit the check character along with Code 128 barcode data.
Symbologies 192 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Sub-C o de Change T ransmission Enables/disables the transmission of “Sub-Code exchange” characters (NOT transmitted by standard decoding).
Code 128 Pr oduct Reference Guide 193 C ode 128 — cont . C ode 128 Quiet Z ones This feature specifies the number of quiet zones for Code 128 labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 time s the width of the narrowest bar or space in the label.
Symbologies 194 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Minimum Reads This feature specifies the minimum number of consecutive times a Code 128 label must be decoded before it is accepted as good read.
Code 128 Pr oduct Reference Guide 195 C ode 128 — cont . C ode 128 Decoding L ev el Decoding Levels are used to configure a barc ode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs.
Symbologies 196 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Decoding L ev el — cont . ENTER/EXIT PROGRAMMING MODE Code 128 Decoding L evel = 1 Code 128 Decoding L evel = 2 Code 128 Decoding L.
Code 128 Pr oduct Reference Guide 197 C ode 128 — cont . C ode 128 L ength C ontr ol This feature specifies either variable length decoding or fixed length decoding for the Code 128 symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Symbologies 198 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Set Length 1 This feature specifies one of the barcode lengths for C ode 128 Length C ontr ol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g th Mode.
Code 128 Pr oduct Reference Guide 199 C ode 128 — cont . C ode 128 Set Length 1 — con t. ENTER/EXIT PROGRAMMING MODE Select Code 128 Set L ength 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 200 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Set Length 2 This feature specifies one of the barcode lengths for C ode 128 Length C ontr ol . Length 2 is the maximum label length if in Va r i a b l e L e n g t h Mode, or the second fixed length if in Fi xed Le n g t h Mode.
Code 128 Pr oduct Reference Guide 201 C ode 128 — cont . C ode 128 Set Length 2 — con t. ENTER/EXIT PROGRAMMING MODE Selec t Code 128 Length 2 S etting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 202 Gryphon™ I GD4100 C ode 128 — cont . C ode 128 Char ac ter C orr elation When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Code 128 Pr oduct Reference Guide 203 C ode 128 — cont . C ode 128 St itching This option enables/disables stitching for Code 128 labels. When parts of a Code 128 barcode are presented to the reader.
Symbologies 204 Gryphon™ I GD4100 GS1-128 The following options apply to the GS1-128 symbology. (Also known as USS-128, GS1-128, GTIN-128, UCC- 128, EAN-128.) GS1-128 Enable This option enables/disables the ability of the reader to translate GS1-128 labels to the GS1-128 data format.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 205 Interlea ved 2 of 5 (I 2 of 5) The following options apply to the I 2 of 5 symbology. I 2 of 5 Enable/Disable When disabled, the re ader will not read I 2 of 5 barcodes.
Symbologies 206 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Check Character Calculation This option enables/disables calculation and verification of an optional I 2 of 5 check character .
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 207 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Check Character T ransmission Enable this option to transmit the check character along with I 2 of 5 barcode data.
Symbologies 208 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times an I 2 of 5 label must be decoded before it is accepted as good read.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 209 Interlea ve d 2 of 5 (I 2 of 5) — con t. 2 of 5 Decoding L ev el NO TE Decoding Levels are used to configure a barc ode symbology decoder to be very aggressive to very conservativ e depending on a partic ular customer’s needs.
Symbologies 210 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. 2 of 5 Decoding Lev e l — cont . ENTER/EXIT PROGRAMMING MODE 2 of 5 Decoding Level = 1 2 of 5 Decoding L ev el = 2 2 of.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 211 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Length C ontrol This feature specifies either variable length decoding or fixed length decoding for the I 2 of 5 symbology. V ariable Length.
Symbologies 212 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Set Length 1 This feature specifies one of the barcode lengths for I 2 of 5 Length C o ntrol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g th Mode.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 213 Interlea ve d 2 of 5 (I 2 of 5) — con t. Datalogic 2 of 5 Set Length 1 — c ont. ENTER/EXIT PROGRAMMING MODE Select I 2 of 5 Length 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Symbologies 214 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Set Length 2 This feature specifies one of the barcode lengths for I 2 of 5 Length C o ntrol . Length 2 is the maximum label length if in Va r i a b l e L e n g t h Mode, or the second fixed length if in Fi xed Le n g t h Mode.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 215 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Set Length 2 — c ont. ENTER/EXIT PROGRAMMING MODE Select I 2 of 5 Length 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Symbologies 216 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Character Correlation When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Interleaved 2 of 5 (I 2 of 5) Pr oduct Reference Guide 217 Interlea ve d 2 of 5 (I 2 of 5) — con t. I 2 of 5 Stit ching This option enables/disables stitching for I 2 of 5 labels.
Symbologies 218 Gryphon™ I GD4100 Interlea ve d 2 of 5 (I 2 of 5) — con t. F ollett 2 of 5 The following options apply to the Follett 2 of 5 symbology. F ollett 2 of 5 Enable/Disable Enables/Disables ability of imager to decode Follett 2 of 5 labels.
Datalogic 2 of 5 Pr oduct Reference Guide 219 Datalogic 2 of 5 The following options apply to the Datalogic 2 of 5 symbology. Datalogic 2 of 5 Enable/Disable When disabled, the reader will not read Datalogic 2 of 5 barcodes.
Symbologies 220 Gryphon™ I GD4100 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Check Char acter Calculation This option enables/disables calculation and verification of an optional Datalogic 2 of 5 check character.
Datalogic 2 of 5 Pr oduct Reference Guide 221 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times an Datalogic 2 of 5 label must be decoded before it is accepted as good read.
Symbologies 222 Gryphon™ I GD4100 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 L ength C o ntrol This feature specifies either variable length decoding or fixed le ngth decoding for the Datalogic 2 of 5 symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Datalogic 2 of 5 Pr oduct Reference Guide 223 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Set L ength 1 This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length C ontr ol . Length 1 is the minimum label length if in Va r i a b l e L e n g t h Mode, or the first fixed length if in Fi xed Le n g t h Mode.
Symbologies 224 Gryphon™ I GD4100 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Set Length 1 — c ont. ENTER/EXIT PROGRAMMING MODE Select Datalog ic 2 of 5 L ength 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Datalogic 2 of 5 Pr oduct Reference Guide 225 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Set L ength 2 This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length C ontr ol . Length 2 is the maximum label length if in V ariable Length Mode, or the second fixed length if in Fixe d Length Mode.
Symbologies 226 Gryphon™ I GD4100 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Set Length 2 — c ont. ENTER/EXIT PROGRAMMING MODE Select Datalog ic 2 of 5 L ength 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Datalogic 2 of 5 Pr oduct Reference Guide 227 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Char acter C orrelation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Symbologies 228 Gryphon™ I GD4100 Datalogic 2 of 5 — c ont . Datalogic 2 of 5 Stitching This option enables/disables stitching for Datalogic 2 of 5 labels.
Codabar Pr oduct Reference Guide 229 Co d a b a r The following options apply to the Codabar symbology. C odabar Enable/Disable When disabled, the reader will not read Codabar barcodes.
Symbologies 230 Gryphon™ I GD4100 C odabar — con t. C odabar Check Char acter Calculation Enable this option to enables/disables calculation and verification of an optional Codabar check character.
Codabar Pr oduct Reference Guide 231 C odabar — cont . C odabar Check Char acter T ransmission Enable this option to transmit the check character along with Codabar barcode data.
Symbologies 232 Gryphon™ I GD4100 C odabar — con t. C odabar St ar t /Stop C harac ter S et This option specifies the format of transmit ted Codabar start/stop characters ENTER/EXIT PROGRAMMING MO.
Codabar Pr oduct Reference Guide 233 C odabar — cont . C odabar St ar t /Stop C harac ter Match When enabled, this option requires that start and stop characters match ENTER/EXIT PROGRAMMING MODE Codabar Star t/Stop Charac ter Match = D on’ t Require Match Codabar Start/Stop Character Match = Require Match .
Symbologies 234 Gryphon™ I GD4100 C odabar — con t. C odabar Quiet Z ones This feature specifies the number of quiet zones for Codabar labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 time s the width of the narrowest bar or space in the label.
Codabar Pr oduct Reference Guide 235 C odabar — cont . C odabar Minimum Reads This feature specifies the minimum number of consecutive times a Codabar label must be decoded before it is accepted as good read.
Symbologies 236 Gryphon™ I GD4100 C odabar — con t. C odabar Decoding Le vel Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs.
Codabar Pr oduct Reference Guide 237 C odabar — cont . C odabar Decoding Le vel — c ont. ENTER/EXIT PROGRAMMING MODE Codabar Dec oding Lev el = 1 Codabar Dec oding Lev el = 2 Codabar Dec oding Lev.
Symbologies 238 Gryphon™ I GD4100 C odabar — con t. C odabar L ength C ontrol This feature specifies either variable length decoding or fixed length decoding for the Codabar symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Codabar Pr oduct Reference Guide 239 C odabar — cont . C odabar Set Length 1 This feature specifies one of the barcode lengths for C odabar Length C ontrol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g th Mode.
Symbologies 240 Gryphon™ I GD4100 C odabar — con t. C odabar Set Length 1 — cont . ENTER/EXIT PROGRAMMING MODE Select Codabar Length 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Codabar Pr oduct Reference Guide 241 C odabar — cont . C odabar Set Length 2 This feature specifies one of the barcode lengths for C odabar Length C ontrol . Length 2 is the maximum label length if in V ariable Length Mode, or the second fixed length if in Fi xe d Le n g t h Mode.
Symbologies 242 Gryphon™ I GD4100 C odabar — con t. C odabar Set Length 2 — cont . ENTER/EXIT PROGRAMMING MODE Select Codabar Length 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Codabar Pr oduct Reference Guide 243 C odabar — cont . C odabar Inter digit Ratio This feature specifies the ratio between an intercharacter space and module for Codabar labels.
Symbologies 244 Gryphon™ I GD4100 C odabar — con t. Codabar Interdigit Ratio — c ont. ENTER/EXIT PROGRAMMING MODE Codabar Int erdigit Ratio = 6 Codabar Inter digit Ratio = 7 Codabar Int erdigit .
Codabar Pr oduct Reference Guide 245 C odabar — cont . C odabar Char acter C orrelation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Symbologies 246 Gryphon™ I GD4100 C odabar Stitching This option enables/disables stitching for Codabar labels. When parts of a Codabar barcode are presented to the reader with this feature enabled, the barcode parts wil l be assembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met.
Code 11 Pr oduct Reference Guide 247 C ode 11 The following options apply to the Code 11 symbology. C ode 11 Enable/Disable When disabled, the reader will not read Code 11 barcodes.
Symbologies 248 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Check Char acter Calculation This option enables/disables calculation and verification of optional Code 11 check character.
Code 11 Pr oduct Reference Guide 249 C ode 11 — cont . C ode 11 Check Char acter T ransmission This feature enables/disables transmission of an optional Code 11 check character.
Symbologies 250 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Minimum Reads This feature specifies the minimum number of consecut ive times a Code 11 label must be decoded before it is accepted as good read.
Code 11 Pr oduct Reference Guide 251 C ode 11 — cont . C ode 11 L ength C ontrol This feature specifies either variable length decoding or fixed length decoding for the Code 11 symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Symbologies 252 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Set Length 1 This feature specifies one of the barcode lengths for C ode 11 L ength Con trol . Length 1 is the minimum label length if in V a riable Length Mode, or the first fixed length if in Fix ed Le n g th Mode.
Code 11 Pr oduct Reference Guide 253 C ode 11 — cont . Code 11 Set L ength 1 — cont. ENTER/EXIT PROGRAMMING MODE Selec t Code 11 Set Length 1 Settin g Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 254 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Set Length 2 This feature specifies one of the barcode lengths for C ode 11 L ength Con trol . Length 2 is the maximum label length if in Va r i a b l e L e n g t h Mode, or the second fixed length if in Fi xed Le n g t h Mode.
Code 11 Pr oduct Reference Guide 255 C ode 11 — cont . Code 11 Set L ength 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 11 Length 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string. Y ou can then star t again at the beginning.
Symbologies 256 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Inter digit Ratio This feature specifies the ratio between an intercharacter space and module for Code 11 labels.
Code 11 Pr oduct Reference Guide 257 C ode 11 — cont . Code 11 Interdigit Ratio — cont. ENTER/EXIT PROGRAMMING MODE Code 11 Interdigit Ratio = 6 Code 11 Inter digit Ratio = 7 Code 11 Interdigit Ra.
Symbologies 258 Gryphon™ I GD4100 C ode 11 Decoding L e ve l Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs.
Code 11 Pr oduct Reference Guide 259 C ode 11 — cont . C ode 11 Decoding Le v el — con t. ENTER/EXIT PROGRAMMING MODE Codabar Dec oding Lev el = 1 Codabar Dec oding Lev el = 2 Codabar Dec oding Le.
Symbologies 260 Gryphon™ I GD4100 C ode 11 — cont . C ode 11 Char acter Correla tion When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Code 11 Pr oduct Reference Guide 261 C ode 11 Stit ching This option enables/disables stitching for Code 11 labels. When parts of a Code 11 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met.
Symbologies 262 Gryphon™ I GD4100 Standard 2 of 5 The following options apply to the Standard 2 of 5 symbology. Standar d 2 of 5 Enable/Disable When disabled, the reade r will not read Standard 2 of 5 barcodes.
Standard 2 of 5 Pr oduct Reference Guide 263 Standard 2 of 5 — c ont. Standar d 2 of 5 Check Char ac ter C alculation This option enables/disables calculation and verification of an optional Standard 2 of 5 check character.
Symbologies 264 Gryphon™ I GD4100 Standard 2 of 5 — c ont. Standar d 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times a Stan dard 2 of 5 label must be decoded before it is accepted as good read.
Standard 2 of 5 Pr oduct Reference Guide 265 Standard 2 of 5 — c ont. Standar d 2 of 5 Length C ontrol This feature specifies either variable length decoding or fixed length decoding for the Standard 2 of 5 symbology. V ariable Length. For variable length decoding, a minimum and maximum length may be set.
Symbologies 266 Gryphon™ I GD4100 Standard 2 of 5 — c ont. Standar d 2 of 5 Set Length 1 This feature specifies one of the barcode lengths for Standard 2 of 5 Length C ontrol . Length 1 is the minimum label length if in Va r i a b l e L e n g t h Mode, or the first fixed length if in Fi xed Le n g t h Mode.
Standard 2 of 5 Pr oduct Reference Guide 267 Standard 2 of 5 — c ont. Standard 2 of 5 Set L ength 1 — cont . ENTER/EXIT PROGRAMMING MODE Selec t Standard 2 of 5 L ength 1 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Symbologies 268 Gryphon™ I GD4100 Standard 2 of 5 — c ont. Standar d 2 of 5 Set Length 2 This feature specifies one of the barcode lengths for Standard 2 of 5 Length C ontrol . Length 2 is the maximum label length if in V ariable Length Mode, or the second fixed length if in Fixe d Length Mode.
Standard 2 of 5 Pr oduct Reference Guide 269 Standard 2 of 5 — c ont. Standard 2 of 5 Set L ength 2 — cont . ENTER/EXIT PROGRAMMING MODE Selec t Standard 2 of 5 L ength 2 Setting Make a mistake? Scan the CANCEL barcode t o abor t and not sav e the entr y string.
Symbologies 270 Gryphon™ I GD4100 Standard 2 of 5 — c ont. Standard 2 of 5 Char ac ter Correla tion When correlation is enabled, the barcode re ader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/ or voids.
Standard 2 of 5 Pr oduct Reference Guide 271 Standar d 2 of 5 Stitching This option enables/disables stitching for Standard 2 of 5 labels . When parts of a Standard 2 of 5 barcode are presented to the.
Symbologies 272 Gryphon™ I GD4100 ISB T 128 The following options apply to the ISBT 128 symbology. ISB T 128 Enable/Disable When disabled, the imager will not read ISBT barcodes. ENTER/EXIT PROGRAMMING MODE ISBT 128 = Disable ISBT 128 = Enable ISB T 128 C oncatena tion Use this option to enable/disable ISBT128 concatenation of 2 labels .
ISBT 128 Pr oduct Reference Guide 273 ISB T 128 — cont . ISB T 128 F orce C oncatena tion When enabled, this feature forces concatenation for ISBT. NO TE ENTER/EXIT PROGRAMMING MODE ISBT 128 F orc e.
Symbologies 274 Gryphon™ I GD4100 C ode 4 The following options apply to the Code 4 symbology. C ode 4 Enable/Disable Enables/Disables ability of imager to decode Code 4 labels.
Code 4 Pr oduct Reference Guide 275 Co d e 4 — co n t . C ode 4 Check Char acter T ransmission This feature enables/disables transmission of an optional Code 4 check character.
Symbologies 276 Gryphon™ I GD4100 C ode 5 The following options apply to the Code 5 symbology. C ode 5 Enable/Disable Enables/Disables ability of imager to decode Code 5 labels.
Code 5 Pr oduct Reference Guide 277 Co d e 5 — co n t . C ode 5 Check Char acter T ransmission This feature enables/disables transmission of an optional Code 5 check character.
Symbologies 278 Gryphon™ I GD4100 C ode 4 and Code 5 C ommon C onfigur ation Items The following options apply to both Code 4 and Code 5 symbologies. C ode 4 and 5 Decoding L ev el Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs.
Code 4 and Code 5 Common Configuration Items Pr oduct Reference Guide 279 C ode 4 and C ode 5 C ommon C o nfigura tion Items — c ont. Code 4 and 5 Dec oding Lev e l — cont.
Symbologies 280 Gryphon™ I GD4100 C ode 4 and C ode 5 C ommon C o nfigura tion Items — con t. C ode 4 and C ode 5 M inimum Reads This feature specifies the minimum num ber of consecutive times a Cod e 4 or Code 5 label must be decoded before it is accepted as good read.
Pr oduct Reference Guide 281 Appendix A T echnical Specifica tions Table 35 contains Physical and Performance Characteristics, User Environment and Regulatory information. Table 36 provides Standard Cable Pinouts. Table 35. Technical Specifications Item Description Phys ical Characteristics Colo r White/Gray Gray/Gra y Dimensions Height 7.
Technical Specifications 282 Gryphon™ I GD4100 (a) T ypical inpu t current measured under factory default configuration. (b) See "Interface Selection" on page 17 for a listing of av ailable interf ace sets by model type. (c) 13 mils DOF based on EAN.
Technical Specifications Pr oduct Reference Guide 283 Standar d Cable Pinouts Fig u r e 1 0 and Table 36 provide standard pinout information for the Base Station’s interface cable.
Technical Specifications 284 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 285 Appendix B LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. An optional “Green Spot” also performs useful functions. The tables below list these indications.
INDICA TION DESCRIPTION LED BEEPER P ow er-up Beep The r eader is in the process of pow- ering-up . Reader beeps four times a t highest fr eq uency and volume upon pow er- up .
LED and Beeper Indications Pr oduct Reference Guide 287 Error C odes Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic Selftest and has entered FRU (Field Re placeable Unit) isolation mode. If the reader is reset, the sequence will be repeated.
LED and Beeper Indications 288 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 289 Appendix C Standar d Defaults The most common configuration settings are listed in the “Default” column of the table below. Page references are also provided for feature descriptions and programming barcodes for each parameter.
Standard Defaults 290 Gryphon™ I GD4100 Data Bits 8 Data Bits 54 Stop Bits 1 Stop Bit 55 Pa r i t y None 56 Handshaking Con trol Disable 57 RS-232/USB-COM RTS/CT S Scan C ontrol — RT S is asserted during transmissions. CTS ga tes transmis- sions and controls enable and disable state of scanner .
Standard Defaults Pr oduct Reference Guide 291 Global Prefix/Suffix No Global Prefix Global Suffix = 0x0D (CR) 108 Global AIM ID Disable 110 Label ID Contr ol Disable 117 Case Conver sion Disable 124 .
Standard Defaults 292 Gryphon™ I GD4100 EAN 8 Enable/Disable Enable 141 EAN 8 Check Character T ransmission Send 141 Expand EAN 8 to EAN 13 Disable 142 EAN 8 Minimum Reads 11 4 3 UPC/EAN Global Sett.
Standard Defaults Pr oduct Reference Guide 293 GS1 DataBar™ Limited Enable/Disable Disable 169 GS1 DataBar™ Limited GS1-128 Emula- tion Disable 169 GS1 DataBar™ Limited Minimum Reads 11 7 0 Code.
Standard Defaults 294 Gryphon™ I GD4100 Code 128 Dec oding L evel 31 9 5 Code 128 L ength Control V ariable 197 Code 128 Set L ength 1 11 9 8 Code 128 Set L ength 2 80 20 0 Code 128 Character C orre.
Standard Defaults Pr oduct Reference Guide 295 Datalogic 2 of 5 Set L ength 2 100 225 Datalogic 2 of 5 Character C orrela tion Disable 227 Datalogic 2 of 5 Stitching Disable 228 Codabar Codabar Enable.
Standard Defaults 296 Gryphon™ I GD4100 Code 11 Stit ching Disable 261 Standard 2 of 5 Standard 2 of 5 Enable/Disable Disable 262 Standard 2 of 5 Check Character Calcula- tion Disable 263 Standard 2.
Pr oduct Reference Guide 297 Appendix D Sample Barcodes The sample barcodes in this appendix are ty pical representations for their symbology types. UPC-A EAN-13 Code 39 Code 128 0 1 2 3 4 5 6 7 8 9 0.
Sample Barcodes 298 Gryphon™ I GD4100 Sample Barc odes — c ontinued Interleaved 2 of 5 Code 32 Codabar Code 93 Code 1 1 12345678901231 00246897634 5765485 7554628485.
Sample Barcodes Pr oduct Reference Guide 299 GS1 DataBar™ (RSS) NO TE GS1 DataBar™-14 GS1 DataBar™ v ariants must be enabled to r ead the barc odes below (see GS1 DataBar™ (RSS) on page 299 ).
Sample Barcodes 300 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 301 Appendix E K eypad Use the barcodes in this appendix to enter numbers as you would selec t digits/characters from a keypad.
Keypad 302 Gryphon™ I GD4100 6 7 8 9.
Keypad Pr oduct Reference Guide 303 A B C D E F.
Keypad 304 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 305 Appendix F Sc ancode T ables C ontrol Char ac ter Emulation Control character emulation selects from different scancode tables as listed in this appendix. Each of the control character sets below are detailed by interface type in the tables.
306 Gryphon™ I GD4100 Inter face T ype PC A T PS/2 or USB-K eyboard T able F-1. Scancode Set When Control Char acter is 00 or 01 Extended characters (sky blue) are sent through dedicat ed keys (when av ailable in the selected country mode) or by using an Al t Mode sequence.
Product Reference Guide 307 Inter face T ype PC A T PS/2 or USB-Keyboar d — cont . T able F-2. Scancode Set When Control Char acter is 02.
308 Gryphon™ I GD4100 Inter face type PC A T PS/2 Alt Mode or USB-K eyboard A lt Mode T able F-3. Scancode Set When Control Char acter is 00 or 01.
Product Reference Guide 309 Inter face type PC A T PS/2 Alt Mode or USB-Keyboar d Alt Mode — cont . T able F-4. Scancode Set When Control Char acter is 02.
310 Gryphon™ I GD4100 Digital Inter face T able F-5. Scancode Set When Control Char acter is 00 or 01.
Product Reference Guide 311 Digital Inter face — c o nt . T able F-6. Scancode Set When Control Char acter is 02.
312 Gryphon™ I GD4100 IBM31xx 102-ke y T able F-7. Scancode Set When Control Char acter is 00 or 01.
Product Reference Guide 313 IBM31xx 102-k ey — cont . T able F-8. Scancode Set When Control Char acter is 02.
314 Gryphon™ I GD4100 IBM XT T able F-9. Scancode Set When Control Char acter is 00 or 01.
Product Reference Guide 315 IBM XT — cont . T able F-10. Scancode Set When Control Char acter is 02.
316 Gryphon™ I GD4100 Microsof t Windo ws C odepage 1252 Windows-1252 is a character encoding of the Latin alphabet, used by default in the legacy components of Microsoft Windows in En glish and some other Western languages.
Scancode Tables Pr oduct Reference Guide 317 NO TES.
Scancode Tables 318 Gryphon™ I GD4100 NO TES.
Pr oduct Reference Guide 319 Index B barcodes cancel 301 numeric barcodes 301 RS-232 baud rate 91 RS-232 parameters parity 82 , 218 ,2 7 2 ,2 7 4 ,2 7 6 ,2 7 9 Beeper Pitch, Good Read 31 ,3 2 Volume, .
320 Gryphon™ I GD4100 Index P Performance Characteristics 281 Physical Characteristics 281 Pitch – Good Read, Beeper 31 ,3 2 Polarity (wand) 102 Prefix/Suffix 108 Product Specifications 281 Progra.
ASCII Char t ASCII Char . He x No . ASCII Char . He x No . ASCII Char . He x No . ASCII Char . He x No . NUL SOH STX ETX EO T ENQ AC K BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN E.
Datalogic Scanning, Inc. 959 T err y Street Eugene, OR 97402 USA T elephone: (541) 683-5700 F ax: (541) 345-7140 ww w .scanning .datalogic.com Austr alia Datalogic Scanning Pt y Ltd T elephone: [61] (2) 9870 3200 australia.scanning@datalogic .com F rance and Benelux Datalogic Scanning Sarl T elephone: [33].
An important point after buying a device Datalogic Scanning I GD4100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Datalogic Scanning I GD4100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Datalogic Scanning I GD4100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Datalogic Scanning I GD4100 you will learn all the available features of the product, as well as information on its operation. The information that you get Datalogic Scanning I GD4100 will certainly help you make a decision on the purchase.
If you already are a holder of Datalogic Scanning I GD4100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Datalogic Scanning I GD4100.
However, one of the most important roles played by the user manual is to help in solving problems with Datalogic Scanning I GD4100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Datalogic Scanning I GD4100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
