Instruction/ maintenance manual of the product MCL-3212 Dakota Digital
Go to page of 6
MAN# 650378 MODEL MCL-3212 SPEEDOM ETER/TACHOMETER for 2012 – up Dyna and Soft ail wi th 4” g auge GA UGE SETUP AND CA LIBRA TION The setup menus are ente red by hol ding the switch in while turnin g the k ey on.
MAN# 650378 MO UNTING The gauge will mount using the original housing, gromm et, and scr ews. Unbolt the two screws from the back plate at the back of the gauge housing, then unplug the factory gauge, noting the position of the grom m ets.
MAN# 650378 SPEED CA L IBRA TION The speed c alibration is not required unless y ou have changed out the stock transm ission, pulley, or tires. ADJvST ADJvST ADJvST ADJvST Adjust • Pre ss and releas e the s witch until “ AdJvSt ” is di splayed, then pre ss and hold th e switch un til “ - ” i s disp layed.
MAN# 650378 Set FC Set FC Set FC Set FC Temperature send er setup The tem perature gauge can read the stoc k head tem perature sens or from the ECM. • Pre ss and releas e the s witch until “ Set FC ” is di splayed, then pre ss and hold th e switch un til “ - ” is d isplayed .
MAN# 650378 FUE FUE FUE FU E L L L L Low fuel lig ht and distan ce to empty setu p If the ra nge feat ure is t urned on , the ran ge readi ng will ini tially sh ow the word range until a tank of gas has be en driven t o allow the g auge to compl ete its setup b ased on your driving .
MAN# 650378 Troubleshooting guide Problem Possible cause Solu tion Gauge will not light up. Red/Orange w ire does not have power. Inspect and repair stock harness. Black/Green wire is not gett ing a good ground. Inspect and repair st ock harness. CAN bus wiring open or short.
An important point after buying a device Dakota Digital MCL-3212 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital MCL-3212 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital MCL-3212 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital MCL-3212 you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital MCL-3212 will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital MCL-3212, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital MCL-3212.
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital MCL-3212. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital MCL-3212 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
