Instruction/ maintenance manual of the product SH-9840P Daewoo
Go to page of 66
DVD Player + Video Cassette Recorder Please read this manual carefully before connecting your DVD+VCR and operating it for the first time. Keep the manual in a safe place for future reference.
Contents Product Infor mation Important Safeguards ..................................................... 1 Advantages of This Product Are .... ............................ 4 Read Carefully before Using ......................................... 5 Identification of Controls .
1 Important Safeguards CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 This set has been designed and manufactured to assure personal safety . Impr oper use can result in electric shock or fire hazard. The safeguar ds incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
3 Important Safeguards unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 13 DISC TRA Y Keep your fingers well clear of the disc tray as it is closing.
4 Advantages of This Product Are ..... • DVD, VCD, CD, CD-R(MP3), CD-R W , VHS • W atching DVD and recording broadcasts • Integrated remote control (VCR, DVD) • VISS function • Multiplex sou.
5 Read Carefully befor e Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔ Installation place and handling • When you place this player near other devices, they may affect poorly together.
6 Identification of Controls SELECT STANDBY/ON EJECT VIDEO AUDIO REC STOP REW PLA Y/PAUSE FF OPEN/CLOSE AV INPUT ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supply is connected.
7 Identification of Controls Timer Recording Standby Timer Recording Error Recording in Progress Timer Recording in Progress Recording Pause Repeat one chapter [DVD] Repeat track [VCD] Repeat title [D.
8 Identification of Controls ! # * & ^ @ $ % ! POWER CORD It is a jack for supplying power to the unit. Connect to outlet in a wall. @ EURO AV2/DECODER scart socket # VIDEO OUTPUT phono socket $ A.
9 Identification of Controls Remote control 2 Batteries RF cable Scart cable (supplied only SH-9840P) Instruction Manual • To purchase accessories or not supplied additional parts, contact your nearest dealer or service centre. N.B.: Owner’s manual and warranty are not sold additionally.
10 Remote Control ! # @ $ % ^ & ( ) 2 4 5 7 9 “ # ‘ = q w e R r T Y 0 + E t y W Q * 3 1 6 8 ! [DVD] OPEN/CLOSE button, [VCR] EJECT button @ VCR SELECT button # [DVD, VCR] NUMBER button, [VCR] .
11 Setting up your player With this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the [TV/VCR] button on the remote control, your TV will automatically display the CH BBC1. “VCR” will be shown in the display.
12 Connecting your player through extra equipment (satellite system) ■ Before you start, unplug all the equipment from the mains supply . Television Aerial Back view of your player 200-240V~, 50/60 Hz You can use this connection if your player has two scart sockets.
13 Connecting your player to the Hi-Fi system ■ Before you start, unplug all the equipment from the mains supply . Television Plug a phono cable into the “Audio L/R” sockets on the back panel and into the audio sockets on any audio amplifier, if needed.
14 How to connect your player to another player ■ Before you start, unplug all the equipment from the mains supply . First player Second player 200-240V~, 50/60 Hz 1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front display.
15 Connecting Dolby Digital Amp with Digital Audio Out Jack (L) AUDIO IN (R) 1 1 Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital. ** If you want to know about “Dolby Digital”, please refer to [About DVD] in 54-56p.
16 2nd scart socket If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on pages 12-15. 2nd scart INPUT ONLY INPUT+OUTPUT When connecting other equipment please refer to their manuals for further information.
17 Initial Installation ■ Switch the TV on. ■ Y ou can also start "AUTO SET" in the SETUP "PR PRESET" ➝ "AUTO SET".
18 ■ Press [VCR] button on the r emote control to change into VCR Mode and follow the procedur e below . Call up the player’s "SETUP" menu, choose "VCR SETUP", then "CLOCK SET". 1 Move to the position you want to change and type in the new values.
19 OSD ON & OFF Output Select Press [DVD] button. If DVD mode is correctly selected, DVD is displayed on the operation display. Then, REMOTE control works in DVD function. Press [VCR] button. If VCR mode is correctly selected, DVD on the operation display window goes out.
20 DVD Playback Press [ ] button to power on. Press [DVD] button of REMOTE to select DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, ensuring the disc’s label is uppermost. Insert the disc and press [OPEN/CLOSE] button to close the tray.
21 VCR Playback Press [ ] button to power on. Press [VCR] button of remote control to change to VCR mode. Insert the desired tape. If you want to playback, press [PLAY/PAUSE] button. When the operational status is flickering, adjust [TRACKING +/-] button.
22 1 1 If you want to playback DVD during recording with video, insert a DVD disc. Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into DVD mode and press [PLAY] button.
23 Recording “This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
24 T uning in New Stations ■ The TV and player are switched on. ■ T o see the picture fr om your player , press the input or A V (Audio/V ideo) button on the TV . To complete the set-up of your video recorder when the auto set has not stored all of the channels or when you wish to store a new channel.
25 ■ If your player is showing no station name or is showing a station name incorrectly , you can correct this. Call up this menu (see the previous page), if it isn't displayed. Select NAME position. Press the [0] button to change the given name.
26 T imer Recording ■ For timer recor dings, clock, date, and stations must be set correctly . ■ Load a cassette with its safety tab in place and with sufficient free space for the r ecording. Call up the VideoPlus menu by pressing PROGRAM on the remote control.
27 T imer Recording ■ For timer recor dings, clock, date, and stations must be set correctly . ■ Load a cassette with its safety tab in place and with sufficient fr ee space for the recor ding. Call up the player’s "SETUP" menu and, choose "TIMER PROGRAM".
28 T imer Recording Call up the player’s "SETUP" menu, choose "TIMER PROGRAM". 1 Select the programming you wish to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [ œ œ / √ √ ] buttons.
29 More Functions ■ The counter counts in real time fr om the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. ■ If you rewind beyond the zer o position, the counter counts in negative values (e.
30 The player will wind to the position 0:00:00 and stop. REW SP GO TO ZERO 0:02:13 Reset the counter. COUNTER RESET 0:00:00 Using this player you can play and record programmes having 16:9 Wide-Screen format.
31 Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by after 5 minutes, if no tape is played and no tuning signal is received.
32 ■ The player recor ds the complete sound signal transmitted by the TV station. ■ On the mono VCR, you will hear the normal mono sound. In addition to the normal mono sound track of VHS video recorders, your player is equipped with a high- quality Hi-Fi sound system.
33 Connections and Copying ■ If you are using a SCAR T cable, select the A V input on the TV to see the picture fr om the player . ■ If you are not using a SCAR T cable, select the programme number on the TV reserved for video input to see the picture fr om the player .
34 Connections and Copying ■ Switch off all components when connecting or disconnecting cables. To copy to your player from another video machine, connect the two machines with a cable between their EURO AV (SCART) sockets and select as programme "AV 1/AV 2" or “F.
35 To move to next chapter (or track), press [ √√ ❚ NEXT] button. The current chapter (or track) moves to the next chapter (or track). Press [ ❚ œœ PREV] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track).
36 ■ You may repeat a defined period from A to B. A MP3 disc may not be repeated from A to B. At the point where you want to start the repeat playback period, press [A-B] button. The figure shown on the right appears and the repeat playback start position (A) is set.
37 Playing a desired scene If you want to search with a title number, press [SEARCH] button one time. It shows current and total title numbers. Please enter the new title number to be searched using the [NUMBER] buttons. 1 If you want to search with a time, press [SEARCH] button three times.
38 Playing a desired scene If you want to search with a track number, press [SEARCH] button once. If PBC is OFF, the screen like the figure to the right appears. It shows current and total track numbers. Please enter the new track number to be searched using the [NUMBER] button.
39 Confir ming the current PLA Y mode on screen While in playing, press [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down ( …† ) cursor and enter the new settings with [number], [ œ ] or [ √ ] button.
40 Confir ming the current PLAY mode on screen While in playing, press [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down ( …† ) cursor and enter the new settings with [number], [ œ ] or [ √ ] button.
41 Selecting an AUDIO language, SUBTITLE language and 3D AUDIO ■ The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the user’s preferred language appears in playback mode.
42 Selecting ZOOM and Multi Angle ■ The user can enlarge the current screen about 2 or 4 times. Keep pressing [ZOOM] button till the preferred zoom appears. Every time the user presses [ZOOM] button, the zoom magnification changes 2 times (X2) ➝ 4 times (X4) ➝ OFF ➝ 2 times (X2) ➝ .
43 About MP3, CDDA, JPG and MPG discs This unit will play MP3 or CDDA files recorded on CD-R and CD-R W discs. Turn on your television and select the channel assigned to this DVD player. Press the DVD open [OPEN/CLOSE] button, the disc tray opens. Put a MP3 or CDDA disc on the disc tray with the label side up.
44 About MP3, JPG and MPG discs You can programme playback. Select the file to programme. Then press [PROGRAM]. The selected file will go into PROGRAM folder. Press [PLAY] or [ENTER] in PROGRAM folder. If you want to delete all the files in the PROGRAM folder, select by pressing [ √ † ] and press [ENTER].
45 About MP3, JPG and MPG discs This unit will play JPG files recor ded on CD-R and CD-RW discs. Select the desired folder. Move the cursor to the desired folder by pressing [ …† ] and press [ENTER] to confirm. 1 Slideshow Delay Time set. Select “ Slideshow &Delay Time” function.
46 About MP3, JPG and MPG discs This unit will play MPG files recor ded on CD-R and CD-RW discs. Select the desired folder. Move the cursor to the desired folder by pressing [ …† ] and press [ENTER] to confirm. 1 Select the desired MPG file. Move the cursor to the desired MPG file.
47 ■ If a disc includes menus, the user may display them. Press [MENU] button. • In the case of a DVD disc, it shows the menus on the disc. Also they are different according to the discs. • If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.
48 Language Setup While in STOP or RESUME STOP mode, press [SETUP] button. 1 Selecting an OSD language. Select an OSD language to be displayed on DVD menus with [ENTER].
49 Selecting Disc Menu language. Set your preferred DISC MENU language with [ENTER]. If the DISC MENU language is set and recorded on the DISC, it is automatically played back in the set language every time it is played. OTHERS - - - - : Another language can be selected.
50 V ideo Setup While in STOP or RESUME STOP mode, press [SETUP] button. Selecting TV Aspect. Set your preferred TV ASPECT ratio with [ENTER] button. 2 1 ■ A user can set up a connected TV and screen size condition. If a user selects “4:3 PS”, the user can watch only a centre of the original scene of “16:9”.
51 Audio Setup Select a Digital Output. Set audio output to coaxial or optical. You can set the outgoing digital signal to BITSTREAM or LPCM: 2 Select a Dynamic Range. You can set the Dynamic Range as follows: • Off : You can hear the sound as it was originally recorded on the disc.
52 Other Setup Select character display window. Select "On" to make the OSD (On Screen Display) language appear on screen. 2 Select screensaver.
53 Changing a password. To change your password, move the cursor to “PASSWORD” and press [ √ ]. Enter your current password. Then enter a new password and press [ENTER].
54 About DVD • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type Playable Restriction DVD Possible Region number 2 or Region number All Video CD Possible Version 1.
55 About DVD DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages.
56 About DVD • Keep the disc clean and in good condition. Handle with care. • Do not put sticky paper or tape on it. • Do not expose a disc to direct sunlight or other forms of heating. • After using the disc, please replace it in its case. • Before using the disc, please wipe it from its centre outwards, using a clean, soft cloth.
57 • In the case of an old or contaminated videotape, playback picture may not be clear due to the contamination of the VCR heads. Please remove contaminants using a head-cleaner. (See below!) 1 Insert a head-cleaner into VCR 2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds.
58 T rouble Shooting guide (VCR) • “Power On” does not work. • It does not work even in “Power On”. • A videotape is not recognised. • On inserting a videotape, the tape is re-ejected. • The videotape is not ejected. • A picture on the video channel and a playback image do not appear.
59 T rouble Shooting guide (VCR) • Recording a TV program is impossible. • After pressing “REC”, the videotape is ejected automatically. • Timer recording of Cable TV does not work. • In spite of pressing “CHANNEL”, a channel can not be set.
60 T rouble Shooting guide (DVD) • The recorder does not play. • No sound comes through. • A disc is playing but a picture does not appear or a poor picture appears. • Sound is irregular • REMOTE does not work. • Dolby Digital sound does not work • “AUDIO” or “SUBTITLE” button does not work.
61 Specifications Disc type DVD VIDEO-CD CD Analogue Audio output 48/96KHz sampling 44.1KHz sampling 44.1KHz sampling Digital Audio output 48KHz sampling 44.1KHz sampling 44.1KHz sampling Optical digital audio output 48KHz sampling 44.1KHz sampling 44.
62 QUICK ST ART GUIDE FOR SORTING CHANNELS ON THE DVD COMBO Once the ‘Auto Set’ function has been completed the On Screen Display will show a list of the channels which it has found, displayed in the order it found them. It is unlikely , that they will be in the correct oder ie.
GUARANTEE REGISTRA TION IMPOR T ANT TEAR OFF HERE AND RETURN TODAY REGISTERING YOUR NEW DAEWOO PRODUCT To register you product for its 12 month guarantee please complete and return the section below. MR MRS MS SURNAME NUMBER/HOUSE NAME/STREET COUNTRY MODEL No.
DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit.
An important point after buying a device Daewoo SH-9840P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo SH-9840P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo SH-9840P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo SH-9840P you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo SH-9840P will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo SH-9840P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo SH-9840P.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo SH-9840P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo SH-9840P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
