Instruction/ maintenance manual of the product F227B Daewoo
Go to page of 25
NEXT T ype No. L17A0D080 User’ s Guide Daewoo Computer F227B TFT LCD Color Monitor.
U.S.A. U.S.FEDERAL COMMUNICA TIONS COMMISSION RADIO FREQUENCY INTERFERENCE ST A TEMENT INFORMA TION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Instructions to Install the Stand .
1. Introduction 2. Safety Information 1/22 This manual contains instructions for installing and operating Daewoo Computer F227B . Daewoo Computer F227B is a highly ergonomic color display unit.
2/22 A void operating the monitor in extr eme heat, humidity or areas af fected by dust. T emperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off befor e plugging the power cord into the socket. Make sur e that the power cord and the other cor ds ar e secur ely and rightly connected.
Cleaning and Maintenance • T o avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user -serviceable. Remember to unplug the display unit from the power outlet before cleaning. • Do not use alcohol (methyl, ethyl or isopropyl) or any str ong dissolvent.
4/22 The following items should be found in the packaging. Above power cord can be changed upon dif ferent voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cor d packed in the product or longer than 3m may affect EMC of the pr oduct in operating condition.
3-2. Instructions to Install the Stand Install the stand according to the following instructions on a flat surface. 1. Place the main unit body with scr een face down and flip open the folded Stand Post at 12 0 deg r ee angle.
6/22 3-3. Selecting a suitable location 3-4. Connecting the monitor • Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. • Place the monitor in a position where no light shines dir ectly onto or is reflected on the scr een.
7/22 5. T urn on the power to the computer . The pictur e will appear within about 10 seconds. Adjust the picture to obtain optimum pictur e quality . See section Adjusting the picture in this guide for mor e information.
• Audio system 8/22 ! ! This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2W rms (max.) output power . This system also supports a headphone output jack. When this monitor is turned on, audio is always set up as off mode.
9/22 3-5. Setting the r efresh rate Follow the instructions below to set your refr esh rate in Windows 98/ME/XP/2000. 1. Go to the configuration window(Start-Settings-Configuration window). 2. Double click on the ‘ Display ’ icon. 3. Click on the ‘ Settings ’ tab.
Preset Timing T able If the signal from the system doesn't equal to the pr eset timing mode, adjust the mode with refer ence to the user guide of videocard because the screen may not be displayed. The recommended setting is a r esolution of 1280x1024 and a refresh rate of 60Hz.
3-6. User’ s Environment Kensington Security (Locking) Slot Recommended Ergonomic User ’ s Environment • Viewing angle of the monitor should be between 0~20 degree. • This display unit supports a Kensington-type security device to secure your monitor .
VESA MOUNT ’ G • This display unit supports VESA FPMPMI standard for 75mm x 75mm scr ew mounting by giving 4 screw holes inside the base stand of the unit. • For buying VESA Flat Panel Monitor Mounting Devices, please contact following information.
4. Adjusting the picture 13/22 Y ou can adjust the screen display by using the buttons located below the screen. 1280x1024 H:63.9 V :60.0 BRIGHTNESS BRIGHTNESS F22 7 B 1 7 " TFT LCD Color Monitor.
14/22 1. Push the MENU button to call the OSD to the screen. The r esolution and frequency ar e displayed at the top of the menu box for your information. 2. Push the or button to choose the item you want to adjust. The selected item is highlighted. 3.
15/22 4-3. OSD Adjustments The OSD adjustments available to you are listed below . BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature af fects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatur es bluish.
16/22 CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire scr een image. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER Y ou can set the displayed time of OSD Menu window on the screen by using this adjustment.
AUDIO VOLUME Adjust the audio volume level. AUDIO This menu is used to choose audio on or off. AUTO ADJUST Y ou can adjust the shape of screen automatically at the full scr een pattern.
If the power management function of your computer is enabled, your monitor turns on and off automatically . Y ou can control power management featur es fr om your computer . Y our computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle.
6. T roubleshooting 19/22 Problem Blank screen Error message: Video mode not supported The display does not enter power management mode Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on.
20/22 Possible solution Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. T ry another color temperature. Adjust the picture characteristics as described in the section OSD Adjustment(4-3).
Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer .
22/22 17"viewable, Diagonal, Pixel pitch 0.264 mm, A-Si TFT 2 5 0cd/m 2 16msec (Typ.) 337.92 x 270.336 mm R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz 1280 x 1024@75Hz 1280 x 1024@60Hz 100-240 VAC, 1.0A 35W(Typ.
An important point after buying a device Daewoo F227B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo F227B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo F227B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo F227B you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo F227B will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo F227B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo F227B.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo F227B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo F227B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
