Instruction/ maintenance manual of the product DV6T544B Daewoo
Go to page of 28
DVD-VIDEO PLA YER OwnerÕ s Manual Model : DV6T834N [Hi-Fi] DV6T834B [Hi-Fi] DV6T844N [Hi-Fi] DV6T844B [Hi-Fi] DV6T534N [MONO] DV6T534B [MONO] DV6T544N [MONO] DV6T544B [MONO] ◆ In the initial settings, exclusive channel for DVD/Video is set to CH 3.
P/N : 97P95600N0-78.
Product Information 1 Important Safeguards CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
Product Information 3 2 This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
4 Product Information 5 Advantages of This Product Are ..... ¥ DVD, VCD, CD, CD-R(MP3), CD-R W , VHS playback function ¥ W atching DVD for recording broadcast ¥ Integr ated remote control (VCR, DVD.
Product Information 7 Identification of Controls Front panel ! P ower (ST ANDBY/ON) button Use to power the device on/off if AC power supply is connected.
9 Product Information 8 Oper ation Display Window T ime, Counter and Current Oper ation Tray is opened Tray is closed Disc is loaded There is no disc in tray Disc has some error Menu screen is display.
11 Product Information Installation 10 Remote Control 6 @ # ! $ % ^ & * ( ) 1 2 3 4 5 7 8 9 0 “ ‘ + = Q q W w E e R ! [DVD] MENU button @ POWER button # [DVD] TITLE /PBC button $ [DVD] O.
13 Installation 12 Connecting with Cable Box How to connect INPUT 1 IN OUT ANT IN INPUT 2 OUT OUT IN If your cable system only requires you to use a converter box for some channels (i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.
15 Installation 14 How to Connect Connecting with an Analog Audio AUDIO ANT INPUT AUDIO INPUT CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.
Press [DVD] button. If DVD mode is correctly selected, DVD on the operation display window is lighted. Then, remote control button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the DVD OPERATION mode. Basic Oper ation 17 Clock Set Press [SETUP] button.
19 Basic Oper ation 18 DVD Playback Press [ √ √ ] button to power on. Press [DVD] button of remote control to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray . Place a disc firmly on the disc tray, making its label look upward.
21 VCR Oper ation 20 T o Delete Channels Manually ■ After memorizing automatically channels, when the same broadcasting is memorized in more than two channels, or you want to delete badly displayed channels, follow the procedures below.
22 T o Enjoy Another TV Channel or DVD during recording 1 1 If you want to watch another TV channel during recording with video, press [TV/VCR] button. It is available of changing into and watching another TV channel by pressing TV [CHANNEL] buttons. 2 2 If you want to playback DVD during recording with video, insert a DVD disc.
25 VCR Oper ation 24 Set proper ÒRECORDING SPEEDÓ. Select one of SP/SLP with [ ] or [ ] button. For more information on recording speed, see ÒUsing video cassetteÓ in the page 24. 6 6 Press [SETUP] button to complete the setting. ÒProgram # has been saved.
27 VCR Oper ation 26 W atching and Recording Cable TV T o W atch and Record Promptly Cable TV P ower on converter and then, set a channel to watch or to record. P ower on DVD-v ideo and then, set the channel of DVD-video to the converter-connected channel (one of CH03/04/EXTERNAL INPUT).
29 VCR Oper ation 28 Press [SETUP] button and select ÒFUNCTIONSÓ. Select ÒIndex SearchÓ. 1 1 ■ When you record a programs, the VCR places an index mark at the start of the recording.
31 VCR Oper ation Hi-Fi Stereo Playback (Hi-Fi Model only) Playing a tape in Hi-Fi high-quality ¥ ÒHi-FiÓ signal lights up in the top of a screen. ¥ Pressing [AUDIO] button changes menus one by one. If there are some noises made in recording, please ÒLinearÓ to reduce them.
33 DVD Oper ation ■ You may repeat a defined period from A to B. At the point where you want to start the repeat playback, press [A-B] button. The right figure appears and repeat playback start position (A) is set. 1 1 Rep. A- At the point where you want to end the repeat playback, press [A-B] button again.
35 DVD Oper ation 34 Confirming the current PLA Y mode on screen Confirming the current DVD disc mode While in playing, press [DISPLA Y] button. It shows the disc type, current title, current chapter and time elapsed. 1 1 Press [DISPLA Y] button again.
37 DVD Oper ation 36 ZOOM, Multi Angle and Digest play Using a zoom function ■ The user can enlarge the current screen about 1.3 or 2 times. Keep pressing [ZOOM] button till the preferred zoom appears. Every time the user presses [ZOOM] button, a zoom magnification changes 1.
39 DVD Oper ation Setup 38 LANGUAGE Setup While ST OP or RESUME ST OP , press [SETUP] button. 1 1 Selecting a OSD language. Please select a language to be displayed on DVD screen.
41 Setup Others Setup Select character display window . Select "On" to make OSD(On Screen Display) language displayed in screen. 2 2 Select screensaver .
43 The others 42 CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter number. TITLE It means the information recorded in a DVD.
44 45 The others How to use a head cleaner ¥ In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads. Please remove contaminants using a head-cleaner like below order. 1 Insert a head-cleaner into VCR. 2 Press [PLAY] for 5 seconds, and then press [FF] for about 10 seconds.
46 47 The others Before doubting about troubles (VCR) ¥ Recording a TV program is impossible. ¥ Once pressing [REC], a videotape is ejected automatically. ¥ Timer recording of Cable TV does not work. ¥ In spite of pressing [CHANNEL], a channel can not be set.
48 DVD Audio output standards Specifications Power AC 120V, 60Hz Consumed electricity 24W (supplementary 4W) Weight 4.6kg Dimension (WxHxD) 435mm x 93mm x 255mm Operative temperature +5¡C~35¡C Insta.
W arr anty DEAM (Daewoo Electronics America) warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furni.
An important point after buying a device Daewoo DV6T544B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DV6T544B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DV6T544B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DV6T544B you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DV6T544B will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DV6T544B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DV6T544B.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DV6T544B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DV6T544B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
