Instruction/ maintenance manual of the product DT-42A1 Daewoo
Go to page of 72
PLASMA DISPL A Y USER’S MANU AL D T -42A1 Proper use guar antees product life. Before using the product, be advised that you read this owner’ s manual well and try to operate it.
F eatur es F eatur es • 42” VGA wide Plasma P anel • Built in 2-Analog T uners This PDP has 2-analog tuners inside for watching t errestrial broadcasting without the need to purchase a separate broadcasting rec eiver .
Safety Pr ecautions Safety P recautions 4 • All the safety and operating instructions should be read befor e the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace an y par ts of the T V .
5 During Use Do not open the cov er (or back) because high voltage is presen t within the T V enclosure . It may cause electric shock . Never push an y kind of objec ts into this product through openings at the back of T V . It may cause fire or electric shock.
6 • All the safety and operating instructions should be read before the pr oduct is operated. CA UTION Y ou can be injured, or this product or any other of your property can be damaged if you don ’t follow instructions. Pow e r Alwa ys obe y all safety messages .
7 During Use Do not wipe the T V using a cloth damped with chemicals (benzene, thinners, etc.). The T V appearance may be marr ed. (Unplug the power plug and wipe with soft cloth.) Do not place heavy objects or heat sources on the pow er cord . It may damage the power cord , causing fire or electric shock.
Note Check to be sure that the f ollowing items are packed with your Plasma panel. 8 Supplied Ac cessories Remote Con trol 1 UNIT F errite Cor e 1UNIT F or Scar t (1 unit) A C Cable 1 UNIT Checking Ac.
Note The following it ems are optional accessories. Refer purchasing optional ac cessories from Daewoo Electronics Local Retailers or the retailer from wher e you purchased the unit.
.
11 PREP ARA TION 4 • Safety Precautions 8 • Checking Accessories 12 • Panel C ontrols 13 • Remote Control 14 • Remote Control Setup C ONNECTION 15 • Antenna Connection 18 • T o W atch T .
12 F ront P anel, Rear P anel * Items having the same names on the plasma display and the remote contr ol would function in exactly the same way. Fr ont / Side Pozycja obejm przeciwzakłóceniowych P .
13 Rear DVI- D INPUT PC INPUT (15 pi n D - su b) COMP ONE NT A /V j ack s (DTV/DVD INPUT jacks) SCART, A/ V INPUT /OUTPUT, Cable Rec eiver INPUT/ OUTPUT jacks ANT Used when manufac turing (or manuf ac.
19 19 58 20 43 53 50 46 69 70 51 55 14 Remote Con trol * The number in ( ) indicates the page in which the function of each button is explained in detail. T V/VCR/DVD/SA T/C A T V Channel Number (0-9) Use to select channel directly (0-9). RECALL Indicates the current state and resolution.
15 Remote C ontr ol S etup Remote C ontrol Setup Remo te C on trol s uppor tin g the mu lti bra nd de vic es. - The remote contr ol provided is designed to operate the Daew oo PDP set.
16 CT V An tenn a C onn ec tion C T V Antenna Connec tion When a coaxial cable is used T V antenna installation may be found in most. Plug the coaxial cable to the antenna socket, and fix it firmly . Antenna socket on the wall Antenna socket at the back of the PDP unit.
17 Out door An t enna C onnection Outdoor antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses. Single Antenna C onnec tion.
18 T o W atch T V T o W atch T V T o W at ch T V - The buttons on the keypad in the PDP unit, which hav e the same name as those on the remote control , per form the same function as the remote control.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 19 Press the “ ON/ OFF” button. • Press the “ON/OFF” button of the PDP unit. • The LED of the PDP unit turns red colour . • Press the “ PR ” , power button of the remote contr ol, or any button on the keypad of the PDP unit.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 20 Install Pr ogram Install Pr ogram Auto S e tup - This is the function for the T V to memorize the broadcasting channels . If the Auto Setup is done, you can simply find programs with “ PR ” buttons and so need not select programs b y pressing each program number .
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 21 Select t he “ A uto Setup” .
22 Edit Edit Deleting the Progra m. • Place the selection bar on the program that you want to delete using the “ PR ” and “ VOL ” buttons. • Press the Delet e( Y ellow) button.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 23 Manu al Setup Manu al Setup Press the Number Buttons( 0 ~9) or the “ VO L ” Button to Select a Program Number Y ou W ant.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 24 Manu al Setup Manu al Setup 4 Picture Sound Screen Feature Install Manual Setup Program 01 Chan nel C0 6 Fine T une 48 Nam e C06 Video P AL Audio D/ K Search Memory Move Adjust Exit Select t he Video and A udio S ystem.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 25 Find the Desired C hannel with ‘Search’ . • By selecting the Search function, you can find the desired channel, but it searches only one channel unlike Auto Setup .
26 W at ching Digital Broadcasts W atching Digital Br oadcasts • T o watch digital broadcasts: - Purchase a separate Digital Broadcasting Receiver(SET -T OP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. W atching Digital Broadcasts Connect a Digital Broadcasting Receiv er to the PDP • Prepar e A/V cables.
C O M P O N E N T Com po ne nt 1 Com po ne nt 2 27 Input Select • Select [Component 1 or Component 2] by pressing the “COMPONENT” button of the remote contr ol or using the “INPUT SELEC T ” button of the PDP unit. • Each time you press the “COMPONENT” button, differ ent input modes appear .
AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : Wh en using the AV3 input, th ere is no ne ed to use b oth as S -Vide o will always t ake prece dence on this in put but yo u must have the rig ht and le f t audio l eads conne cte d to pro duce soun d when usin g S-V ide o.
• N. B. : An S -Vid eo inp ut into A V3 w ill take p recede nce over the no rmal ye llow vid eo lea d so no ne ed to utilise this i f S-V ideo l ead is use d but you mus t still us e the right an d lef t aud io leads to p roduce sound.
AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : If usin g A V3 then S -Vi deo t akes prece dence so no n eed fo r vide o lead i f S-V ideo l ead use d the audio l eads must s till be us ed to produc e sound.
AV1 AV 2 AV ( S ) 3 AV 31 Input Selec t • Select [A V 1(Scart), AV 2(Scart) or A V3(S-Video)] by pressing the [ A V ] button of the remote contr ol or the “INPUT SELECT ” in keypad of the PDP unit. • Each time you press the [ A V ] button, different input modes appear .
AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 • N. B. : Vi deo in put can b e via sc ar t cab le S -Vide o lead o r yellow p hono ja ck. The re d and white p lugs are for l ef t and ri ght audio to accomp any the yellow v ide o lead or to b e use d with the S -Vid eo lea d to produ ce sound .
AV1 AV 2 AV ( S ) 3 Component 1 C omponent 2 33 NO TES: 1) Y/Cb/Cr , which stands for component video DVD player’ s output can also be written as Y/B-Y/R- Y , Y/Pb/P r depending on the kinds of DVD model.
AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 34 W at ching a V CR Image W atching a VCR Image • Video can use either the video terminal or the S-video terminal. W atching a VCR Image Connect a VCR to the PDP . • Prepar e the A V cable.
AV1 AV 2 AV ( S ) 3 AV 35 NO TES: 1) When connecting a VCR the S- Video terminal pro vides a better image than the Video terminal. 2) When connecting to the V ideo terminal, connect 3 colour A V cable.
AV 2 AV 1 L - O I D U A - R O E D I V - S O E D I V AV 3 36 W at ching a Camc order/Game C onsole Image W atching a C amc order/Game C onsole Image • Enjoy images recor ded by camcorder or the game console after connecting to the W atching a Camc order/Game Console Image Connect a Camc order/Game Console to the PDP .
AV1 AV 2 AV ( S ) 3 AV 37 NO TES: 1) When connecting the device, the S-V ideo terminal provides a better image than the Video terminal . 2) When connecting to the V ideo terminal, connect 3 colour A V.
38 C onnec ting PC(15pin D -sub) C onnec ting PC(15pin D -sub) • This product supports resolutions of VGA, SVGA, XGA. • Before c onnecting a PC to the PDP , be sure to adjust the resolution of the PC. C onnec ting PC Before C onnecting to the PDP , Set the Resolution of the PC.
P C / D V I PC DVI • N. B. : Y o u cannot s elec t PC o r DVI if the pi ctu re in p ict ur e mo de is on. 39 NO TES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA). 2) If there is a [ Vertical Fr equenc y]setting menu in the [Display] menu of the PC, adjust the frequency to 60Hz.
DVI-D INPUT 40 C onnec ting PC(DVI) C onnec ting PC(DVI) • This product supports resolution of VGA, SVGA, X GA. • Before c onnecting a PC to the PDP , be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at DVI.
P C / D V I PC DVI • N. B. : Y ou cannot s ele ct PC o r DVI if the p ic ture in pic ture mo de is on . 41 NO TES: 1) The resolution of the PC monitor is the best at 640 x 480 (VGA). 2) If there is a [ Vertical Fr equenc y]setting menu in the [Display] menu of the PC, adjust the frequency to 60Hz.
42 PC and DVI Input Resolution A vailable in PDP PC and DVI Input Resolution A vailable in PDP • Depending on graphic card , problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card compan y for help .
.
44 Selec ting Pic ture Mode Selec ting Pic ture Mode Selec ting Picture Mode • Press the [PICTURE MODE] on the remote contr ol. • While pressing the [PICTURE MODE] for the first time, the current picture mode will be displayed. 1 Each Press of the Button W ill Selec t One of F our Picture Modes.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 45 C ustomising Picture C ustomising Pic ture • Y ou can adjust the colour tone and brightness to your prefer ence. C ustomising Picture Press the MENU Button. • The MENU shown below will displa y on the screen.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 46 Selec t User Mode A djustments • While you are in [P icture Mode – User], press the “ PR ” buttons to select a specific adjustment item. 4 Picture Condition A djustments • Press the “ VOL ” buttons to adjust the picture of y our preference .
14:9 LB(14:9) LBS(14:9) LB(16:9) Auto 16:9 4:3 Panorama LBS(16:9) • N. B. : Y o u cannot s elec t scre en size if th e pic ture in pic ture mo de is on . 47 A djusting Screen A djusting Screen • Y ou can adjust screen size or aspect ratio as desired.
48 A djusting Screen in the MENU A djusting Screen in the MENU • Y ou can adjust the screen in the menu. Adjusting Screen Press the MENU Butt on. • The MENU screen as shown belo w will appear . 1 Press the “ ▼ PR ▲ ” Button. • Press the ” PR ” buttons to select ‘Screen’ .
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 49 Press the V olume “ VO L ” Buttons. • Press the Volume “ VOL ” buttons to enter the sub menu “Screen ” .
Still 50 Press the “STILL ” Button. • If you wish to freeze a picture , press the “STILL ” button. Y ou can still hear the sound. • Press “STILL ” button again to cancel the “STILL ” function. 1 W at ching a STILL Image W atching a STILL Image • Y ou can view still images with this function.
Main Sub Sub Sub Sub Sub Main Main Main <Using ‘Posit ion’ but ton> < Usin g „ PR ” and „ VOL ” buttons > Pip Si ze Adjusting th e size of the sub -pic ture with “ VOL ” buttons. Alp ha Bl end The a djustment o f alpha blen d allows the sub - pic ture to be tr ansluce nt.
52 W a tching T wo Pictures Simultaneously W a tching T wo P ic tures Simultaneously Selec t the progr am • Using program Up/Do wn buttons (PR /PR ), you may select the desired channels for sub-pictures. • The PR Up/Down buttons select the T V channels.
53 A dj u st i ng A ut o Sou nd M o de A djusting A uto Sound Mode • Enjoy various sound modes by selecting your fav ourite Sound Mode depending on the kinds of moving pictures. Adjusting A uto Sound Mode Selec t “SOUND MODE” . • Press the “SOUND MODE” on the remote control.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 54 Press the MENU Butt on. • The MENU screen as below will be displa yed. 1 C ustomising Sound Mode C ustomising Sound Mode • This feature allo ws the user to adjust for their prefer ence. C ustomising Sound Mode Press the “ PR ” Button.
55 • If a programme is receiv ed in two languages (dual language), you can switch to Dual I, Dual II or F mono by pressing the I/II button of the remote contr ol repeatedly . Dual I Dual I sends the primary broadcast language to the loudspeakers. Dual II Dual II sends the secondary broadcast language to the loudspeakers.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 56 C ustomising Sound Mode C ustomising Sound Mode Selec t the Sound Mode. • Select the Sound M ode by pressing the “ PR ” buttons, then adjust it by pressing the “ VOL ” buttons. 5 Picture Sound Screen Feature Install Bal ance 0 Effe ct O ff AVC Off Mode Normal 120Hz 0 500HZ 0 1.
Component 1 VCR/DVD SA T TV CA TV 57 Press the Input Signal Selecting Button. • Press the “ T V ” , “ A V ” , “C OMPONENT ” or “PC/DVI” button on the remote contr ol or the PDP Display to select the desired input signal. • Each time you press input mode buttons , a different input mode appears.
Comopnent 1 PM 12:00 PR22 PR Name Mono/Stereo T ime PR22 PR Name Mono PM 12:00 AV 1 PM 12:00 Component 1 PM 12:00 - Press the [R ECALL] butto n on the remote contro l, then displ ays basic infor matio.
PR PR V O L V O L MENU P R E V P R S C R E E N S I Z E 59 • Used to select the tanslucent level of MENU background and language used in MENU. Selec ting Languages MENU Back ground , Language and Child Lock Setting MENU Back ground , Language and Child Lock Setting Press the MENU Button.
60 Selec t LANGU A GE by using the “ PR ”Button. • Select [Language] by using the” PR ” button. • Every press of the “VOL ” button while you are in the [Language] mode would cycle through the different languages .
61 • MGDI function can not be used In PC and DVI modes. MGDI MG DI (Me ta Gen ui ne Di gi tal Im age ) MGDI (Meta Genuine Digital Image) MGDI is the image enhancement technology of Daewoo Electronics , which provides more clear , realistic, and delicate images.
62 Auto P ow er Sett ing • Select the [Auto P ower] by pressing the “ PR ” button from [F eatures]. • Y ou can select [Auto P ower] ON and OFF mode by using the “VOL ” button.
63 T ime S etting T ime S etting Press the MENU Button. • The MENU screen will be display ed as below . 1 Selec t Fea tures • Select [Features] by the “ PR ” button. 2 Selec t Time Sett ing • Enter the sub menu by using the “ VOL ” button.
64 Off- Time and W ake time setting • Select Functions by pressing the “ PR ” but- ton. F irst, set [Clock]- current time, and then Y ou can setup off-time and wake time. • [Clock] : Adjust the desir ed hour and minute with “◄ VOL ► ” button.
65 ISM (Image Sticking M inimisation) ISM (Image Sticking M inimisation) Press the MENU Button. • The MENU screen will be display ed as below . 1 Press the “ PR ”Button. • Select [Features] by the “ PR ” button. 2 Selec t ISM. • Enter the sub menu by using the “ VOL ► ” button.
66 Selec t F unc tions. • Every press of the “VOL ” button af ter select function by the “ PR ” button would switch between ON/OFF . 4 ISM (Image Sticking Minimisation) ISM (Image Sticking M inimisation) NO TES: * Pix el Shift : The whole screen shifts up/down, left/right at 15 sec interval to minimize image sticking.
67 Initialize Setting Initialize Setting Press the MENU Button. • The MENU screen will be display ed as below . 1 Selec t Fea tures • Select [Features] by the “ PR ” button. 2 • Y ou can restor e the values of the adjustment setting made in the MENU back to factory settings.
68 INIT IAL ISA TION • Enter the sub Menu by using the “VOL ” button. • Select the [I nitialize] by pr essing the “ PR ” button, then press the “ VOL ” button. • A confirmation message will be displayed . • T o per form initialization, press the “ VOL ” button after selecting [ YES] by the “ PR ” button.
Sleep Timer off Sleep Timer 15 Sleep Timer 30 Sleep Timer 120 Sleep Timer 90 Sleep Timer 60 69 Setting Sleep T imer Setting Sleep T imer Press the “SLEEP” But ton. • Press the “SLEEP ” button on the Remote Contro l. • Pressing the “SLEEP ” button first time will display the current setting f or Sleep Timer .
70 T elete x t T eletext Switching T eletext ON/OFF • Pr ess the T ext button ( ). T he index page or the page viewed last will appear . Pr ess the T ext button again to return to the T V mode. Colour buttons in T OP/FL OF T eletext • A red , green, yellow and cyan field is shown at the bottom of the screen.
71 Calling Up Subpage Directly • P ressing the Subpage ( ) button. The subpage number is displayed at the bott om of the screen. T o change the subpage, press the subpage number , for example, the 2nd page, sequence 02. The desired subpage will ev entually be displayed on the screen and holds it there .
Before r equesting for service, check the following points once again. 72 Befor e Requesting Ser vice Befor e Requesting Ser vice Symptoms • Remote control does not function properly . • The Display makes a snapping sound. • There are empty spots at the top and the bottom area of the screen.
73 SPECIFICA TIONS DISPLA Y UNIT Diagonal Size 106 cm (42”) Screen Aspect Ratio 16:9 System P AL B/G, I/I, SECAM B/G, D/K, L/L ’ Display Resolution 852(H) x 480( V ) dots Pixe l Pit ch 1,08(H) x 1,08( V ) mm Dimension 1260(Sz.) x 653( W ) x 91(Gł.
An important point after buying a device Daewoo DT-42A1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DT-42A1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DT-42A1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DT-42A1 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DT-42A1 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DT-42A1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DT-42A1.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DT-42A1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DT-42A1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
