Instruction/ maintenance manual of the product DP-SP21 Daewoo
Go to page of 9
S P E A K E R PLASMA MONIT OR (DISPLA Y) SPEAKER INSTRUCTION MANUAL DP-SP22 DP-SP21 DP-SP20 Thank you for purchasing the Daewoo Electronic Plasma Display Speakers. These speakers are specifically designed only for the Daewoo Plasma Display . T o ensure the safe operation of the unit, please read these instructions before installing.
1 T ABLE OF CONTENTS 1. Check for enclosed parts ............................ 2 2. Important Safety Instructions ...................... 3 3. Assembly Instructions .
PLASMA DISPLAY SPEAKER 2 S P E A K E R 1. PLEASE CHECK THE FOLLOWING ITEMS SHOWN BELOW (2) (16) (2) (4) (2) (4) SPEAKER M5 SCREWS VIBRA TION ABSORBENT SPONGE SPECIAL SCREWS / ROUND HEAD SCREWS SPEAKER.
3 2. IMPORT ANT SAFETY INSTRUCTIONS PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE T O THIS UNIT . PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY (Doing so may cause the un.
PLASMA DISPLAY SPEAKER 4 S P E A K E R Please be careful not to stain the speakers with any gas or oil. When assembling, be sure to use the enclosed parts and make sure all parts are tightly screwed as instructed. Do not place the speakers in a humid or dusty place.
5 3. ASSEMBLING INSTRUCTIONS USING SPEAKERS WHEN A TT ACHED TO THE PLASMA DISPLA Y A TT ACHING VIBRA TION ABSORBENT SPONGES T O SPEAKERS INST ALLING FIXED BRACKETS TO SPEAKERS . Clean the surface with soft, lint-free cloth where sponges will be attached.
PLASMA DISPLAY SPEAKER 6 S P E A K E R INST ALLING SPEAKERS TO THE PLASMA DISPLA Y . Place a protective covering over the surface you will be working on and lay the plasma display as shown below . . T ake the speakers with fixed brackets to the back of the plasma display .
7 CONNECTING SPEAKER WIRES . T ake the speaker wire(2) and use the red cord to connect to and fro (+) inputs, and use the black cord to connect to and fro (-) inputs. 4 . Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds.
PLASMA DISPLAY SPEAKER 8 S P E A K E R INST ALLING SPEAKERS TO ITS OWN ST AND. CONNECTING SPEAKER WIRES. . Use a coin to secure the special screws (round head screws) tightly. Please be sure to have the vibration absorbent sponge onto the side of the speaker where the stand will be attached.
An important point after buying a device Daewoo DP-SP21 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DP-SP21 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DP-SP21 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DP-SP21 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DP-SP21 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DP-SP21, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DP-SP21.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DP-SP21. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DP-SP21 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
