Instruction/ maintenance manual of the product DLP-32C3 Daewoo
Go to page of 53
LCD TELEVISION INSTRUCTION MANU AL DLP -26C2 DLP -26C3 DLP -32C1 DLP -32C2 DLP -32C3 DLP -37C3 DLP -42C1 GB.
2 Caution CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMOVE COVER (OR BA CK). NO USER-SERVICEABLE P ARTS INSIDE.
3 Impor tant Safeguards Please read the following saf eguards for your T V and retain for future reference. Always follo w all warnings and instructions marked on the television. 1. Read , Retain and Follow A ll Instructions Read all safety and operating instructions before operating the T V .
4 EXAMPLE OF ANTENNA GROUNDING Antenna lead in wire Antenna discharge unit (NEC section 810-20) Grounding conductors (NEC section 810-21) Ground clamps Pow er service grounding Electrode system (NEC art 250, par t h) Ground clamp Electric Service Equipment NEC — national electrical code Impor tant Safeguards 13.
5 W arning This section must be read carefully and follow ed by the user prior to the opera tion of the product. The manual states important instructions for the user ’ s own safety , and the proper operation of the product.
6 W arning This section must be read carefully and follow ed by the user prior to the opera tion of the product. The manual states important instructions for the user ’ s own safety , and the proper operation of the product.
7 T able of C ontents Installation and Maintenanc e Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Camcorder & Video G ame Connection .
8 Supplied A ccessories Make sure that the f ollowing accessories are pr ovided with the product. AC c o r d MUTE PICTURE P.MO D E STILL DYNAMIC BASS 3D-PANORAMA P.
9 HDMI INPUT AV1 AV2 PC INPUT AUDIO S-VHS AV3 L - AUDIO - R OPTICAL UP-GRADE PCRT COMPONENT Pr RL Pb Y An tenna C onnec tion Indoor Antenna C onnec tion 1. Connect the feeder cable of the antenna t o the combining adapter . WHEN THE IMA GE IS NO T CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna c on- nection.
10 An tenna C onnec tion CT V Antenna C onnection Such community T V Antenna installation may be found in most of co-op apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
11 HDMI INPUT AV1 AV2 PC INPUT AUDIO S-VHS AV3 L - AUDIO - R OPTICAL UP-GRADE PCRT COMPONENT Pr RL Pb Y An tenna C onnec tion Outdoor Antenna C onnec tion Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at privat e houses.
12 HDMI INPUT A V1 A V2 PC INPUT AUDIO S-VHS A V3 L - AUDIO - R OP Video C onnec tion C onnecting with an Ex ternal Source Y ou may connect an S-Video input to enjoy clearer and brighter picture images. Y ou can make the connec tion with the A V3 input.
13 Camc order & Video Game C onnec tion W atching the C amcorder Rec ording on T V 1. Prepare the S-video and RCA c onnector . 2. These connectors connect to S-video or A V 3 as shown in the picture below. 3. Turn on the T V set and camcorder/video game.
14 D VD Pla y er connection When c onnec ting with a componen t cable and Euro SCART cable Back of the tv set DVD Note : • When you connect with the component video , please check the colour of the cable between the DVD and T V set.
15 STB(Set T op Bo x) C onnec tion When c onnec ting with a HDMI cable Back of the tv set Set T op Box When c onnec ting with a componen t cable Set T op Box Back of the tv set.
16 PC C onnec tion When c onnec ting with PC(D-Sub) cable . 1. F irst adjust resolution of the PC. (640 X 480, 800 X 600, 1024 X 768) 2. Connect between PC and T V set using the D-sub and Audio cable as shown in the picture below . 3. Turn on the PC and T V set.
17 PC C onnec tion PC C ONNECTION NO TES: 1) The resolution of the T V set is best at 1024 768(X GA). 2) If there is a [ V er tial F requency] setting menu in the [Display] Menu of the PC, adjust the frequenc y to 60Hz. 3) If the PC resolution is too high, it may be hard to detect signals.
18 Cable T V Broadcasting C onnec tion External Input Connection Source W atching cable television is only possible after you hav e subscribed to the local broadcasting company and installed a cable receiver . Y ou may make the connection to any of the Component input and SCART input A V1, A V2.
19 C onnec t with the Dolby Digital AMP . If you connect the optical output to a Dolby digital AMP , you can listen to better sound . Optical output Dolby Digital AMP L Woofer Center R Surround L Surr.
20 Name of Each P ar t F ront P anel ( DLP-26C2 / DLP-32C2) Buttons on the T V set have the same functions as those of the remote controller . Con trol Ke y Buttons. ① Buttons : Each time you press this button, the TV will c ycle through: T V / A V1 / A V2 / A V3(S-Video) / PC/HDMI / COMPONENT .
21 F ront P anel (DLP-26C3 / DLP-32C3 / DLP-37C3) Buttons on the T V set have the same functions as those of the remote controller . Con trol Ke y Buttons. ① Button : Each time you press this button, the TV will c ycle through: T V / A V1 / A V2 / A V3(S-Video) / PC/HDMI / COMPONENT .
22 Name of Each P ar t F ront P anel (DLP32C1 / DLP-42C1) Buttons on the T V set have the same functions as those of the remote controller . Con trol Ke y Buttons. ① AV Button : Each time you press this button, the T V will cycle through: T V / A V1 / A V2 / A V3(S-Video) / PC/HDMI / COMPONENT .
23 Name of Each P ar t Side and Rear P anel Side Panel Rear Panel.
24 MUTE PICTURE P. M O D E STILL DYNAMIC BASS 3D-PANORAMA P .PR P. P R LOCK SLEEP P .STILL P .SWAP P .INPUT ASPECT SOUND POWER RECALL PREV PR OK MUL TIMEDIA MENU V O L V O L PR PR 1 23 4 56 7 89 0 X ? P ar ts of the Remote C ontroller This remote controller is univ ersal; thus, it may be con vertible for T V , Video , CT V , etc.
25 MUTE PICTURE P .MODE STILL DYNAMIC BASS 3D-PANORAMA P .PR P. P R LOCK SLEEP P .STILL P .SWAP P .INPUT ASPECT SOUND POWER RECALL PREV PR OK MUL TIMEDIA MENU V O L V O L PR PR 1 23 4 56 7 89 0 X ? P ar ts of the remote con troller 18. DYNAMIC BASS : Using this button, you can enhance the bass.
26 Install Picture Mode Normal Brightness 32 Contrast 58 Colour 32 Sharpness 32 Tint 32 Colour T emp Normal Screen Sound Func ti on Position Access Exit Install Picture Mode Normal Brightness 32 Contr.
27 MUTE PICTURE P. M O D E STILL DYNAMIC BASS 3D-PANORAMA P .PR P. P R LOCK SLEEP P .STILL P .SWAP P .INPUT ASPECT SOUND POWER RECALL PREV PR OK MUL TIMEDIA MENU V O L V O L PR PR 1 23 4 56 7 89 0 X ? T o W atch T V On/Off , Number , Mute, Recall, , Buttons with same name in the main body performs the same function.
28 Vol um e PR 19 – – – – – Mono Clock 1 2 : 0 0 T o W atch T V 1. Press the “ON/OFF” button of the main body . • The Stand By LED lamp turns on in red colour . • Press “ ” button of the main body or “POWER” button of the remote control.
29 Install Picture Mode Normal Brightness 32 Contrast 58 Colour 32 Sharpness 32 Tint 32 Colour T emp Normal Screen Sound Func ti on Position Access Exit Picture Auto T uning Manual Tuning Setup Edit Screen Sound Function Position Access Exit Install Auto T uning Country Set Italy PR 19 P AL / SECAM Start Country Set Exit Edit Position Pr Ch.
30 Picture Auto T uning Manual Tuning Setup Edit Screen Sound Func ti on Position Access Exit Install Manual Tuning Pr 01 P AL / SECAM PR Change Access Exit Store Setting Up T V Sta tions Manual tuning 1. Press the Number buttons(0~9) or the “ ” button to select a program number y ou want.
31 Picture Auto T uning Manual Tuning Setup Edit Screen Sound Function Position Access Exit Install Picture Progra m 18 Channel – – – Name – – – – – Colour P AL Sound DK1 Fine T uning .
32 Edit P .MODE STILL DYNAMIC BASS 3D-PANORAMA P.PR P. P R P .STILL P .SWAP P .INPUT PR 1 23 Edit P .MODE STILL DYNAMIC BASS 3D-PANORAMA P.PR P. P R P .STILL P .SWAP P .INPUT PR 1 23 Edit P .MODE STILL DYNAMIC BASS 3D-PANORAMA P.PR P. P R P .STILL P .
33 MUTE PICTURE ASPECT SOUND POWER RECALL MULTIMEDIA PR PR 19 – – – – – Mono Clock 1 2 : 0 0 PR 19 – – – – – AV1 Clock 1 2 : 0 0 PR 19 – – – – – AV3 Clock 1 2 : 0 0 PR 19.
34 MUTE PICTURE ASPECT SOUND POWER RECALL MULTIMEDIA PR PC Clock 1 2 : 0 0 HDMI Clock 1 2 : 0 0 Component Clock 1 2 : 0 0 Selec tion of A V and Multimedia Input Signal When c onnec ting PC, STB, DVD with Multimedia 1. Pressing the “MUL TIMEDIA ” button on the remote c ontroller .
35 MUTE PICTURE ASPECT SOUND POWER RECALL MULTIMEDIA PR Mode Normal Mode Movie Mode Fav ourite Screen A djustment When setting up v arious screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or c olour individually .
36 Install Picture Mode Normal Brightness 32 Contrast 58 Colour 32 Sharpness 32 Tint 32 Colour T emp Normal Screen Sound Func ti on Position Access Exit Install Picture Mode Normal Brightness 32 Contr.
37 MUTE PICTURE ASPECT SOUND POWER RECALL MULTIMEDIA MENU V O L V O L PR Aspect Auto Aspect Zoom2 Aspect Zoom1 Aspect Panorama Aspect 4 : 3 Aspect 14 : 9 Aspect 16 : 9 Screen A djustment Adjustmen t of Screen Size in T V and A V mode - Randomly change the size of the screen.
38 Install Picture Aspect 16 : 9 H-Position -3 V-Position 0 Phase 2 Auto Screen Sound Function Position Access Exit Install Picture Aspect 16 : 9 H-Position -3 V-Position 0 Phase 2 Auto Screen Sound F.
39 P .MODE STILL DYNAMIC BASS 3D-PANORAMA P .PR P. P R P .STILL P .SWAP P .INPUT PREV PR OK PR POP Mode 1. POP mode when main picture is TV and A V . • P ress the “P .MODE” button, then POP mode will func tion. • P ress the “P .STILL ” button, then Sub screen will freeze.
40 MUTE PICTURE ASPECT SOUND POWER RECALL MULTIMEDIA MENU V O L V O L PR Mode Favourite Mode Music Mode News Sound A djustment When selecting various sound modes 1.
41 Install Picture Mode Fa vourite 100 Hz 0 300 Hz 0 1 KHz 0 3 KHz 0 10 KHz 0 3D Panorama Off Dynamic Bass Off Balance 0 Screen Sound Function Position Access Exit Install Picture Mode Fa vourite 100 .
42 P .MODE STILL DYNAMIC BASS 3D-PANORAMA P.PR P. P R LOCK SLEEP P .STILL P .SWAP P .INPUT 1 23 4 56 7 89 P .MODE STILL DYNAMIC BASS 3D-PANORAMA P.PR P.
43 Install Picture Language Timer Childlock Off MGDI DEMO Screen Sound Function Position Access Exit Install Picture Language Timer Childlock Off MGDI DEMO Screen Sound Function Position Access Exit I.
44 Install Picture Time 12 : 00 Auto Clock No Auto Clock Pr - - Wake Up No Wake Up Time - - : - - Wake Up Pr - - Off Timer No Off Time - - : - - Screen Sound Function Position Access Exit Install Pict.
45 LOCK SLEEP 1 23 4 56 7 89 0 X ? Install Picture Time 12 : 00 Auto Clock No Auto Clock Pr - - Wake Up No Wake Up Time - - : - - Wake Up Pr - - Off Timer Yes Off Time 1 2 : 0 0 Screen Sound Function Position Access Exit A djustment of Time 4. Set up of Off Time • Mov e to Timer in the Function menu.
46 Install Picture Language Timer Childlock On MGDI DEMO Screen Sound Function Position Access Exit Install Picture Language Timer Childlock On MGDI DEMO Screen Sound Function Position Access Exit On Off O ther F unc tions 1. Setup of Child Lock • Mov e to Child Lock in the F unc tion menu.
47 T eletext T elete xt SWIT CHING TELETEXT ON/OFF Press the “ TELETEXT ” button ( ). The index page or the page viewed last will appear . Press the “ TELETEXT ” button again to return to the T V mode. NOTE: T eletext works only in T V/A V mode.
48 Assemble / separa te par ts How to arr ange the connecting lines and assemble/separat e par ts 1. COVER WIRE assembly , decomposition method. • When separate : After pressing both sides to the direction of arrow , pull backward.
49 Assemble / separa te par ts 2. How to arrange the c onnecting lines. • After connecting the lines to the T V SET , you can pass the lines through the room of C OVER WIRE, and then connect the lin.
50 ❶ ❷ ❷ ❶ ❶ ❷ Assemble / separa te par ts 2. How to assemble the C OVER BO T TOM to the T V SET . ❶ Inset the backside hook of the COVER BO T TOM to the room of the C OVER BACK. ❷ And then rotate the C OVER BOTTOM until front snap-fit of the C OVER BOTTOM is locked.
51 T r oubleshooting Symptoms and Solutions Please check the following list prior t o calling Daewoo Electronics Ser vice Centre for assistanc e. Symptom Check items Neither picture nor sound - Check the contact of sockets is all right. - Check the T V main power is on.
52 T r oubleshooting In PC mode Symptom Check items “OUT OF RANGE” appears on the screen - Check the resolution and frequency of your PC. Then, adjust them to optimum condition for L CD T V . - Refer to the table of PC mode input f ormat (If registered resolution and frequen- cy on the table no listed then no picture will be displayed.
53 Standar d of Pr oduc t Model DLP-26C2 DLP-32C2 L CD Panel Screen Size 26” 32” Aspect Ratio 16:9 16:9 Resolution 1366 x 768 ( WXGA) 1366 x 768 ( WX GA) Pixel P itch 0.4215 mm 0.51075 mm Contrast Ratio 3000:1 3000:1 Dimension ( W x H x D) S et Dimension 812 X 502.
An important point after buying a device Daewoo DLP-32C3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo DLP-32C3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo DLP-32C3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo DLP-32C3 you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo DLP-32C3 will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo DLP-32C3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo DLP-32C3.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo DLP-32C3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo DLP-32C3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
