Instruction/ maintenance manual of the product 181GOA0A Daewoo
Go to page of 35
Service Manual Microwave Oven Model : KOR-180A0A KOR-181G0A DAEWOO ELECTRONICS CO., L TD. http://svc.dwe.co.kr S/M No.: R180A0A002.
PRECA UTIONS T O BE OBSER VED BEFORE AND DURING SER VICING T O A V OID POSSIBLE EXPOSURE T O EXCESSIVE MICRO W A VE ENERGY (a) Do not operate or allow the oven to be operated with the door open.
SAFETY AND PRECA UTIONS CAUTION : This Device is to be Serviced Only by Properly Qualified Service Personnel. Consult the Service Manual for Proper Service Procedures to Assure Continued Safety Operation and for Precautions to be Taken to Avoid Possible Exposure to Excessive Microwave Energy.
SPECIFICA TIONS MODEL KOR-180A, KOR-181G POWER SUPPLY 120V~60HZ, SINGLE PHASE WITH EARTHING MICROWAVE 1500 W POWER GRILL CONSUMPTION COMBINATION MICROWAVE ENERGY OUTPUT 1100 W MICROWAVE FREQUENCY 2450MHz OUTSIDE DIMENSIONS (W X H X D) 589X339X488mm (23.
EXTERNAL VIEW 1. OUTER DIMENSION 488 5.
1. DOOR SEAL Door seal maintains the microwave within the oven cavity and prevents microwave leakage. 2. DOOR HOOK When door is closed, it will automatically lock shut. If door is opened while oven is operating, magnetron tube will immediately stop operating.
K OR-180A0A 1. Time set pad - Used to set the cooking time and the present time. 2. Display - Cooking time, power level, indicators and present time are displayed. 3. One touch - Used to cook or reheat specific quantities of food. 4. Auto cook - Used to cook or reheat.
8 M/W DEF MORE AUTO COOK 1. BREAD 2. SOUP 3. BAKED POTATO 4. FRESH VEGETABLE 5. FROZEN VEGETABLE LESS TIMER LOCK lb POPCORN FROZEN PIZZA DINNER PLATE MEAT POWER DEFROST POULTRY FISH STOP/ CLEAR START/ SPEEDY COOK AUTO DEFROST CLOCK KITCHEN TIMER 12 3 45 6 78 9 0 MICROWAVE OVEN KOR-181G 1.
INST ALLA TION 1. Steady , flat location. This microwave oven should be set on a steady, flat surface. 2. Leave space behind and side. All air vents should be kept a clearance. If all vents are covered during operation, the oven may be overheated and, eventually, cause oven failure.
OPERA TIONS AND FUNCTIONS 1. Connect the main lead to an electrical outlet. 2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always be in place during cooking. 3. Close the door securely.
DISASSEMBL Y AND ASSEMBL Y - Cautions to be observed when trouble shooting. Unlike many other appliances, the microwave oven is high-voltage, high-current equipment. It is completely safe during normal operation. However, carelessness in servicing the oven can result in an electric shock or possible danger from a short circuit.
1. T o remo ve cabinet 1) Remove three screws on cabinet back. 2) Push the cabinet backward. 2. T o remo ve door assembly 1) Remove two screws which secure the stopper hinge top. 2) Remove the door assembly from top plate of cavity. 3) Reverse the above for reassembly.
3. T o remove door parts. REF NO. PART CODE PART NAME DESCRIPTION Q TY REMARK A01 3512205100 3512203900 FRAME DOOR ABS SG-175, SG-0760D 1 KOR-180A KOR-181G KOR-180A KOR-181G A02 3517005320 3517007400 BARRIER-SCREEN*O SAN T1.
4. Method to reduce the gap between the door seal and the oven fr ont surface . (1) To reduce gap located on part A . Loosen two screws on stopper hinge top, and then push the door to contact the door seal to oven front surface. Tighten two screws. (2) To reduce gap located on part B .
5. T o remove contr ol panel par ts. REF NO. PART CODE PART NAME DESCRIPTION Q TY REMARK 3518522800 SWITCH MEMBRANE KOR-180A0A 1 A01 3518522810 KOR-181G2A 1 3516726000 1 A02 3516719100 CONTROL PANEL A.
NOTE : Never install the magnetron without the metallic gasket plate which is packed with each magnetron to prevent microwave leakage. Whenever repair work is carried out on magnetron, check the microwave leakage. It shall not exceed 4mW/cm 2 for a fully assembled oven with door normally closed.
8. T o remove wind guide assembl y . 1) Remove a screw which secure the wind guide assembly. 2) Draw forward the wind guide assembly. 3) Pull the fan from the motor shaft. 4) Remove two screws which secure the motor shaded pole. 5) Remove the motor shaded pole.
INTERLOCK MECHANISM AND ADJUSTMENT The door lock mechanism is a device which has been specially designed to completely eliminate microwave radiation when the door is opened during operation, and thus to perfectly prevent the danger resulting from the leakage of microwave.
TR OUBLE SHOO TING GUIDE Following the procedure below to check if the oven is defective or not. 1) Check grounding before trouble checking. 2) Be careful of the high voltage circuit.
CONDITION CHECK Check continuity of magnetron Defective magnetron RESULT No Continuity CAUSE REMEDY Replace Outlet has proper voltage Fuse does not blow.
CONDITION CHECK RESULT Check continuity of high voltage capacitor terminals with wires removed Continuity CAUSE Defective high voltage transformer REMEDY Replace No microwave oscillation Check continu.
(TROUBLE 4) The following visual conditions inditions indicate a probable defective touch control circuit or membrane switch assembly 1. Incomplete segments, 1) Segments missing. 2) Partical segments missing. 3) Digit flickering other than normal display slight flickering.
MEASUREMENT AND TEST 1. MEASUREMENT OF THE MICR O W A VE PO WER OUTPUT Microwave output power can be checked by indirectly mmeasuring the temperature rise of a certain amount of water exposed to the microwave as directed below.
2. MICRO W A VE RADIA TION TEST PROCEDURE 1. Prepare Microwave Energy Survey Meter, 600cc glass beaker, and glass thermometer 100 F). 15cc of tap water initially at 20 5 9 F) in mm(3.5 in.). 3. Place it at the center of the tray and set it in a cavity.
3. COMPONENT TEST PR OCEDURE High voltage is present at the high voltage terminal of the high voltage transformer during any cooking cycle. It is neither necessary nor advisable to attempt measurement of the high voltage. Before touching any oven components or wiring, always unplug the oven from its power source and discharge the capacitor.
WIRING DIA GRAM 26.
PRINTED CIRCUIT BO ARD 1. CIRCUIT CHECK PR OCEDURE 1. Low voltage transformer check The low voltage transformer is located on the P.C.B. Measuring condition: Input voltage: 120V / Frequency: 60Hz 2. Voltage Check - Key check point - Check method NOTE 1.
MP1 MP2 Mesure point 28.
3. When there is no microwave oscillation 1) When touching START pad, oven lamp does not turn on. Fan motor do not rotate, but cook indicator in display comes on. Cause : RELAY 2 does not operate. refer to Circuit Diagram (point 3) - Check method 2) When touching START pad, oven lamp turns on.
2. PCB CIRCUIT DIAGRAM 30.
NO NAME SYMBOL SPECIFICATION PART CODE Q TY 1 BUZZER BZ1 BM-20K 3515600100 1 2 C ARRAY CA1 7P(6) 102 M 50V CN6XB-102M 1 3 CAPACITOR ELEC EC1 50V RS 1 F CEXE1H109V 1 4 CPAPCITOR ELEC EC2 25V RSS 1000 F.
EXPLODED VIEW AND P ARTS LIST 1. DOOR ASSEMBL Y Refer to Disassembly and assembly 2. CONTROL P ANEL ASSEMBL Y Refer to Disassembly and assembly 3. T O T AL ASSEMBL Y 32.
REF NO PART CODE PART NAME DESCRIPTION Q’TY A00 3511715500 3511715510 DOOR AS KOR-180A0A 1 DOOR AS KOR-181G0A 1 B00 PKCPSWAC00 CONTROL-PANEL AS KOR-180A0A 1 PKCPSWAC50 CONTROL-PANEL AS KOR-181G0A 1 3510802400 1 F01 3516004100 CABINET SECC T0.
REF NO PART CODE PART NAME DESCRIPTION Q ’ TY F33 3513814300 LOCK POM BLACK 1 F34 3513601500 LAMP BL 125V 25W T25 C5A #187 1 F35 7121400611 SCREW TAPPING T2S PAN 4X6 MFZN 1 F36 3966820200 MOTOR SYNC.
DAEWOO ELECTRONICS CO., L TD. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” PRINTED D A TE: DEC, 200 1 S/M NO.
An important point after buying a device Daewoo 181GOA0A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Daewoo 181GOA0A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Daewoo 181GOA0A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Daewoo 181GOA0A you will learn all the available features of the product, as well as information on its operation. The information that you get Daewoo 181GOA0A will certainly help you make a decision on the purchase.
If you already are a holder of Daewoo 181GOA0A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Daewoo 181GOA0A.
However, one of the most important roles played by the user manual is to help in solving problems with Daewoo 181GOA0A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Daewoo 181GOA0A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
