Instruction/ maintenance manual of the product OB52 Dacor
Go to page of 20
I n s t a l l a t i o n I n s t r u c t i o n s E p i c u r e ® O u t d o o r G r i l l Models: OB36, OBS36, OB52 OBS52, OBSB162 Part No. 102032 Rev .
.
1 installation instructions .................................................. 10 Preparing for Installation ................................................ 10 Cabinet Installation ......................................................... 12 Cart Installation .
2 Impor tant Safety Instructions Read the use and care manual completely before using this appliance. Use this appliance only for its intended use as described in the use and care manual. Use it only to cook food. It is not designed for commercial, industrial or laboratory use.
3 Impor tant Safety Instructions w arninG Keep items that could explode, such as aerosol cans away from the grill and burners. Do not store flammable or explosive materials in adjacent cabinets or areas. Do not use towels or bulky cloth as pot holders.
4 Impor tant Safety Instructions TO REDUCE THE RISK OF INJUR Y TO PERSONS IN THE EVENT OF A GREASE FIRE: w arninG General Safety Precautions (continued) T o reduce risk of fire, electric shock, seriou.
5 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8" (689mm) 16" (406mm) Planning the Installation 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8&quo.
6 w arninG This installation must conform to local codes or , in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFP A 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.
7 Planning the Installation Junction Box T rim frame (accessory) 3/4" (19mm) Min. to any material* 10" (254mm) Min. to combustibles 2" (51mm) Min. to non-combustible 1/4" (6mm) 23" (584mm) 24" (610mm) Rotisserie mounting bracket (factory installed) Junction Box T rim frame (accessory) 3/4" (19mm) min.
8 Planning the Installation 3/8" (10mm)ø Both sides 6" x 7" (152mm x 178mm) Utility Cutout 25" (635mm) 8" (203mm) Min. to combustibles above the countertop surface 1 1/4".
9 Location Planning - Car t Installations Above the cooking surface, both sides: 3” (76mm) Min. to non-combustibles 10" (254mm) Min. to combustibles Above cooking surface, behind unit: 3” (76mm) Min.
10 Par ts List Models oB36, oBs36, oB52 & oBs52: A Drip tray G Rotisserie rod and forks B Smoker box H Rotisserie motor C W arming rack J Light lens prystick D Regulator assembly Match holder E Gr.
1 1 D Installation Instructions E F G H P J N K L M whole house natural Gas or l P regulator lP cylinder regulator oBs162, oB36, oBs36 (Pn 72310) lP cylinder regulator oB52, oBs52 (Pn 101578) D D.
12 Installation Instructions Cabinet Installation w arninG T o avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks.
13 Optional Side Shelf Installation Install the front mounting bracket for the right side shelf. Use two (2) of the provided button head fasteners and two (2) lock washers.
14 Connecting the Gas Gas Connection - Natural Gas noTes Units equipped for use with natural gas ship with a regulator assembly with 3/4” pipe attached and an additional 3/4” nipple. The regulator assembly is also equipped with a 3/4” to 1/2” reducer on the inlet side.
15 Put the burner heads on to the burner bases. Line up the slots on each head with the pins on the base so that it lies flat. Put the burner caps on top of the burner heads. Line up the slots on each cap with the pins on the base so that it lies flat.
16 Installation Instructions Final Assembly and T est (cont.) LP Cylinder Installation - Some Models w arninG The largest recommended LP cylinder size for the rollout tank shelf on the cart is five gallons. A five gallon portable liquid propane cylinder should be approximately 12 inches (305mm) in diameter and 18 inches (457mm) high,.
17 Installation Instructions With the tank shelf open, connect the power cord from the outdoor grill and the warming oven (if equipped with one) to the electrical outlet on the back panel inside the cart. Connect the rotisserie motor power cord to the electrical outlet on the back side of the cart.
Copyright © 2007 by Dacor Inc. All rights reserved. Web Site: www .Dacor.com Phone: (800) 793-0093.
An important point after buying a device Dacor OB52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dacor OB52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dacor OB52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dacor OB52 you will learn all the available features of the product, as well as information on its operation. The information that you get Dacor OB52 will certainly help you make a decision on the purchase.
If you already are a holder of Dacor OB52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dacor OB52.
However, one of the most important roles played by the user manual is to help in solving problems with Dacor OB52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dacor OB52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
