Instruction/ maintenance manual of the product IME-150 Aiphone
Go to page of 20
- 1 - 0505 A SECURITY WINDOW INTERCOM SYSTEM IMU-100, IAI-100, IAX-100, IME-100, ISE-100, IME-150 INSTALLATION & OPERATION MANUAL.
- 2 - General Prohibitions General Precautions Prohibitions on Dismantling the Unit Prohibitions on Subjecting the Unit to Water W ARNING (Negligence could result in death or serious injur y to people) 1. Do not dismantle or alter the unit as it could result in a fire or electric shock.
- 3 - 1-2 1-3 1-4 English P acka ge contents (acoustic interface kit IAI-100) 1. Dri ver unit DR-100 2. Screws 3. Rubber seal 4. Acoustic I/O tube AI-100 5. T emporary installation jig 6. T ube fixer FF-100 7. Counter installation scre w English P acka ge contents (acoustic tube IAX-100) 1.
- 4 - Operator units [1] Main unit MU-100 Position under the desk. Can be installed with the mounting bracket provided. [2] Operation unit OU-100 Position on the left or right of the window desk, in a user - friendly location.
- 5 - English Acoustic interface [1] Center of acoustic I/O tube [2] Customer [3] Barrier glass [4] Upper acoustic tube (2) [5] Upper acoustic tube (1) [6] Acoustic I/O tube [7] Lo wer acoustic tube [8] Dri ver unit [9] T ube fixer 1. Estimate the av erage height of customers, taking into account gender and age dif ferences.
- 6 - 4-1 English Main materials and tools 1. Main materials • Double-sided tape Select a tape suitable for your usage en vironment. Recommendation: 4910 (made by 3M) If you are using the acoustic tube system, cut a piece of tape approximately 50cm (20") longer than the total length of the tubes.
- 7 - English Main unit Install the main unit under the counter or desk on the operator side. The cables from the other units will be connected at a later stage by temporarily removing the main unit.
- 8 - 4-4 1. When the installation position is on the left as seen from the customer side, the acoustic I/O tube can be installed unchanged from its shipped configuration.
- 9 - 4-6 English Installation of the acoustic interface (driver unit) [1] Double-sided tape [2] Chassis [3] Set screws [4] Cable hole [5] Ceiling sash, etc. 1. The dri v er unit is connected to the top of the upper acoustic tube. Use the screws pro vided and double-sided tape to secure the chassis to the position where the glass meets the ceiling.
- 10 - 4-8 English Installation of the acoustic interface (acoustic I/O tube) [1] Fixing base of the acoustic I/O tube [2] Fixing base of the lower acoustic tube 1. Remov e the fixing base from the acoustic I/O tube main unit. 2. Attach double-sided tape to this fixing base.
- 11 - 4-10 English Acoustic interface wiring [1] Speaker cable from main unit [2] Microphone cable from main unit [3] T emporary installation jig [4] Acoustic I/O tube main unit [5] Microphone cord [6] Chassis [7] Cord groove 1.
- 12 - 4-11 English [4] Connection ridge [5] Upper acoustic tube (2) [6] Upper acoustic tube (1) [7] Acoustic I/O tube [8] Lo wer acoustic tube [9] Microphone cord [10] Chassis [11] Rubber seal [12] Acoustic tube [13] Set scre w [14] Lead cable (dri ver unit) [15] Microphone cable [16] Speaker cable [17] Dri ver main unit 1.
- 13 - 4-12 English Outer microphone/speaker [1] Racew ay [2] Optional microphone [3] Outer speaker 1. Attach the optional microphone with double-sided tape along the architectural sash. Clean the surface before attaching. Use a strong industrial double-sided tape that can attach aluminum and glass.
- 14 - 5 WIRING DIA GRAM CON 1 12 [1] [4] [4] [4] P age Speaker OP 1 MU-100 2 OU-100 3 IME-100 ISE-100 4 DR-100 5 AI-100 IAX-100 6 PS-2420UL / 2420S - + +: Red SW: White - : Shield [3] [2] [3] [5] E: .
- 15 - 5-1 English Wiring 1. Main unit MU-100 2. Operation unit OU-100 3. Gooseneck microphone IME-100 4. Dri ver unit DR-100 5. Acoustic I/O tube AI-100 and acoustic tube IAX-100 6.
- 16 - English Names [1] POWER LED (green) [2] T ALK switch (orange) [3] V OL switch (orange) [4] P A GE switch (orange) [5] Gooseneck microphone [6] Receiv e speaker [7] Headset connectors [8] POWER .
- 17 - 7 SETTING UP [5] Adjust the sensiti vity of the VO X circuit. • W ith the equipment arranged as it would be during use, ha v e someone talk from the operator position. Adjust the V O X sensitivity knob by turning it clockwise so that it responds to the voice and the green LED illuminates.
- 18 - 8 OPERA TIONS English Operation [1] T urn on the POWER switch of the main unit. The green lamp illuminates to show that electricity is being supplied and the system can be used. [2] T urn on the T ALK switch of the operation unit. The orange lamp illuminates to show that communication is possible.
- 19 - 9-1 9-2 9-5 English Specifications (main kit IMU-100) • Power source: DC 24V • Current consumption: 120 mA (standby) 780 mA (maximum) • Operating temperature: 0 ° C to 40 ° C • Communication: V oice-actuated communication T ransmit output: 3 W 4 Ω Recei ve output: 1.
- 20 - Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.
An important point after buying a device Aiphone IME-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiphone IME-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiphone IME-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiphone IME-150 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiphone IME-150 will certainly help you make a decision on the purchase.
If you already are a holder of Aiphone IME-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiphone IME-150.
However, one of the most important roles played by the user manual is to help in solving problems with Aiphone IME-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiphone IME-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
