Instruction/ maintenance manual of the product xStackTM DGS/DXS-3300 Series D-Link
Go to page of 362
©Copyright 2006. All rights reserved. CLI Manual Product Model : xStack TM DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch Release 4.30.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual Table of Contents Introduc tion ................................................................................................................... ......................
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual RIP Comma nds ................................................................................................................... .......................................289 DVMRP Co mmands .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 1 1 I NTRODUCTION The DGS/DXS-3300 Layer 3 stackable Gigabi t Ethernet switches are m embers of the D-Li nk xStack family .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 2 There is no initial username or passwo rd. Just press the Enter key twice to display the CLI input cursor − DGS-3324SRi:4# . This is the comm and line where all com mands are i nput.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 3 Figure 1-3. Assigning an IP Address In the above example, t he Switch was assigned an IP address of 10.53.13.144 with a subnet m ask of 255.0.0.0. The system message Success indicates that the command was execu ted successfully .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 4 2 U SING THE C ONSOLE CLI The xStack DGS/DXS-3300 Series supports a console management interface that allows the user to connect to the Switch’s managem ent agent via a serial port and a t erminal or a com puter running a term inal em ulation program.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 5 Figure 2-1. Initial Console Screen Comm ands are entered at the com mand prom pts, DGS-3324SRi:4#, DGS-3324SR:4#, DXS-3326GSR:4#, DXS-3350SR:4# . There are a number of helpful features included in the CLI.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 6 Figure 2-3. Example Command Parameter Help In this case, the comma nd config account was entered with the parameter <username> . The CLI will then prompt to enter the <username> with th e message, Next possible completions: .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 7 If a comma nd is entered that is unrecognized by the CL I, the top-level comm ands will be displayed under the Available commands: prompt. Figure 2-5. The Available Commands Prompt The top-level com mands consist of comma nds such as show or config .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 8 3 C OMM AND S YNT AX The following sy mbols are used to describe how com mand ent ries are made and values and argum ents are specified in this manual. The online help contained in the CLI and available through the console interface uses the sam e syntax.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 9 {braces} Purpose Encloses an optional value or set of optional arguments. Syntax reset {[config | sy stem]} Description In the above syntax example, the user has the option to specify config or sy stem .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 10 4 B ASIC S WITCH C OMM ANDS The basic switch comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 11 create account Purpose Used to create user accounts. Syntax create [admin | user] <username 15> Description The create account command is used to create user accounts that consist of a username of 1 to 15 characters and a password of 0 to 15 characters.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 12 DGS-3324SRi:4#config account dlink Command: config account dlink Enter a old passw ord:**** Enter a case-sensitive new passw ord:**** Enter the new passw ord again for confirmation:**** Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 13 Are you sure to delete the last administrator account?(y /n)y Success. DGS-3324SRi:4# Example usage: To delete the user account “System 2”: DGS-3324SRi:4#delete account System2 Command: delete account System2 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 14 DGS-3324SRi:4# show config config_in_NVRAM Command: show config config_in_NVRAM #------------------------------------------------------------------------------------------------------ # DGS-3324SRi Configuration # # Firmw are: Build 4.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 15 show switch Purpose Used to display information about the Switch. Syntax show sw itch Description This command displays information about the Switch. Parameters None. Restrictions None.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 16 DGS-3324SRi:4#show sw itch Command: show sw itch Device Ty pe : DGS-3324SRi Stackable Ethernet Sw itch Unit ID : 1 MAC Address : DA-10-21-00-00-01 IP Address : 10.41.44.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 17 show switch_mode Purpose Used to display the current switch mode. Syntax show sw itch_mode Description This command displays t he current mode of operation of the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 18 show module_info Description This command is used to view information about the DEM-420X and DEM-420CX uplink modules added to an xStack DGS/DXS-3300 series.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 19 show serial_port Parameters None. Restrictions None. Example usage: To display the serial por t setting: DGS-3324SRi.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 20 DGS-3324SRi:4#config serial_port baud_rate 115200 Command: config serial_port baud_rate 115200 Success. DGS-3324SRi:4# enable clipaging Purpose Used to pause the scrolling of the console screen when the show command displays more than one page.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 21 Success. DGS-3324SRi:4# enable telnet Purpose Used to enable communication with and management of the Switch using the Telnet protocol. Syntax enable telnet <tcp_port_number 1-65535> Description This command is used to enable the Telnet protocol on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 22 DGS-3324SRi:4#disable telnet Command: disable telnet Success. DGS-3324SRi:4# enable web Purpose Used to enable the HTTP-based management software on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 23 To disable HTTP: DGS-3324SRi:4#disable w eb Command: disable w eb Success. DGS-3324SRi:4# save Purpose Used to save changes in the Sw itch’s configuration to non-volatile RAM.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 24 reboot Parameters None. Restrictions None. Example usage: To restart the Switch: DGS-3324SRi:4#reboot Command: reboot Are you sure want to proceed w ith the system reboot? (y /n) Please w ait, the Sw itch is rebooting.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 25 login Description This command is used to initiate the login procedure.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 26 5 S WITCH P OR T C OMM ANDS The switch port commands in the Com mand Line Interface (CLI) ar e listed (along with the appropriate param eters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 27 config ports connection must be set for 1000 slave . Any other configuration will result in a link down status for both ports. flow_control [enable | disable] – Enable or disable flow control for the specified ports.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 28 DGS-3324SRi:4#show ports Command: show ports Port Port Settings Connection Address State Sp eed/Duplex/Flow Ctrl Spe.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 29 6 P ORT S ECURITY C OMM ANDS The port security comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 30 To configur e the port security: DGS-3324SRi:4#config port_security ports 5:1-5:5 admin_state enable max_learning_ad.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 31 delete port_security_entry _vlan_name Purpose Used to delete an entry from the Switch’s port security settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 32 7 N ETWORK M ANAGEMENT (SNMP) C OM MANDS The network managem ent comm ands in the Comma nd Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 33 Command Parameters delete snmp host <ipaddr> show snmp host <ipaddr> create trusted_host <ipaddr> .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 34 create snmp user Parameters <username 32> − An alphanumeric name of up to 32 characters that will identify the new SNMP user.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 35 DGS-3324SRi:4#create snmp user dlink default encrypted by_password auth md5 auth_passw ord priv none Command: create snmp user dlink default encrypted by_password auth md5 auth_passw ord priv none Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 36 DGS-3324SRi:4#show snmp user Command: show snmp user Username Group Name VerAuthPriv --------------- ---------------.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 37 delete snmp view <oid> − The object ID that identifies an object tree (MIB tree) that will be deleted from the Switch. Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 38 create snmp community Purpose Used to create an SNMP communi ty string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 39 delete snmp community Description The delete snmp community command is used to remove a previously defined SNMP communi ty string from the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 40 config snmp engineID Purpose Used to configure a name for the SNMP engine on the Switch. Syntax config snmp engineID <snmp_engineID> Description The config snmp engineID command configures a name for the SNMP engine on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 41 create snmp group Purpose Used to create a new SNMP group, or a table that maps SNMP users to SNMP views.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 42 Example usage: To create an SNMP group named “sg1: ” DGS-3324SRi:4#create snmp group sg1 v3 noauth_nopriv read_view v1 w rite_view v1 notify _view v1 Command: create snmp group sg1 v3 noauth_nopriv read_v iew v1 w rite_view v1 notify_view v1 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 43 DGS-3324SRi:4#show snmp groups Command: show snmp groups Vacm Access Table Settings Group Name : Group3 ReadView Nam.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 44 create snmp host Purpose Used to create a recipient of SNMP traps generated by the Switch’s SNMP agent.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 45 delete snmp host Purpose Used to remove a recipient of SNMP traps generated by the Switch’s SNMP agent. Syntax delete snmp host <ipaddr> Description The delete snmp host command deletes a recipient of SNMP traps generated by the Switch’s SNMP agent.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 46 create trusted_host Purpose Used to create the trusted host. Syntax create trusted_host <ipaddr> Description The create trusted_host command creates the trusted host.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 47 delete trusted_host Purpose Used to delete a trusted host entry made using the create trusted_host command above.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 48 Example Usage: To turn on SNMP authenticati on trap support: DGS-3324SRi:4#enable snmp authenticate_traps Command: enable snmp authenticate_traps Success. DGS-3324SRi:4# show snmp traps Purpose Used to show SNMP trap support on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 49 DGS-3324SRi:4#disable snmp traps Command: disable snmp traps Success. DGS-3324SRi:4# disable snmp authenticate_traps Purpose Used to disable SN MP authentication trap support.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 50 DGS-3324SRi:4#config snmp syst em_contact MIS Department II Command: config snmp system_contact MIS Department II Success. DGS-3324SRi:4# config snmp system_location Purpose Used to enter a description of the location of the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 51 enable rmon Purpose Used to enable RMON on the Switch. Syntax enable rmon Description This command is used, in conjunction with the disable rmon command below, to enable and disable remote monitoring (RMON) on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 52 8 S WITCH U TILITY C OMMANDS The switch utility commands in the Com mand Li ne Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 53 download image_id <int 1-2>- This Switch holds two places for storing firmware so the user may store an extra firmware file on the Switch. image_id 1 will hold the current boot up firmware in use on the Switch, unless otherwise configured.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 54 To download a PROM code file: DGS-3324SRi:4#dow nload prom_fromTFTP 10.48.74.121 c:pXprom_2.01-B01d1.had DGS-3324SRi:4# dow nload prom_fromTFTP 10.48.74.121 c:pXprom_2.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 55 upload Restrictions The TFTP server must be on the same IP subnet as the Switch. Only administrator-level users can issue this command. Example usage: To upload a configuration fil e: DGS-3324SRi:4#upload cfg_toTFTP 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 56 DGS-3324SRi:4#config firmw are image_id 2 boot_up Command: config firmw are image_id 2 boot_up Success. DGS-3324SRi:4# show firmware information Purpose Used to display the firmware section information.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 57 Example usage: To ping the IP address 10.48.74.121 four tim es: DGS-3324SRi:4#ping 10.48.74.121 times 4 Command: ping 10.48.74.121 Reply from 10.48.74.121, time<10ms Reply from 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 58 9 N ETWORK M ONIT ORING C OMM ANDS The network monitoring commands in the Comm and Line Interface (C LI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 59 show packet ports Purpose Used to display statistics about the packets sent and received by the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 60 show error ports Parameters <portlist> − Specifies a range of ports to be displayed. The port list is specified by listing t he lowest switch number and the beginning port number on that switch, separated by a colon.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 61 DGS-3324SRi:4#show utilization ports Command: show utilization ports Port TX/sec RX/sec Util Port TX/sec RX/sec Util.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 62 Example usage: To clear the counters: DGS-3324SRi:4#clear counters ports 2:7-2:9 Command: clear counters ports 2:7-2:9 Success. DGS-3324SRi:4# clear log Purpose Used to clear the Switch’s history log.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 63 DGS-3324SRi:4#show log index 1-4 Command: show log index 1-4 Index Date Time Log Text ----- ---------- -------- ----.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 64 DGS-3324SRi:4#disable syslog Command: disable syslog Success. DGS-3324SRi:4# show syslog Purpose Used to display the syslog protocol status as enabled or disabled.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 65 create syslog host Parameters <index 1-4> − Specifies that the command will be applied to an index of hosts. There are four available indexes, numbered 1 through 4.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 66 create syslog host 8 UUCP subsystem 9 clock daemon 10 security/authorization messages 11 FTP daemon 12 NTP subsystem.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 67 config syslog host Purpose Used to configure the syslog pr otocol to send system log data to a remote host.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 68 8 UUCP subsystem 9 clock daemon 10 security/authorization messages 11 FTP daemon 12 NTP subsystem 13 log audit 14 lo.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 69 DGS-3324SRi:4# config syslog host 1 udp_port 6000 Command: config syslog host 1 udp_port 6000 Success. DGS-3324SRi:4# config syslog host 1 ipaddress 10.44.67.8 Command: config syslog host 1 ipaddress 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 70 config syslog host all facility − Some of the operating system daemons and processes have been assigned Facility values.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 71 config syslog host all the remote host, specified above, to be enabled and disabled.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 72 DGS-3324SRi:4#delete syslog host 4 Command: delete syslog host 4 Success. DGS-3324SRi:4# show syslog host Purpose Used to display the syslog hosts currently configured on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 73 config system_severity Purpose To configure when and wher e severity messages are to be recorded.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 74 DGS-3324SRi:4#config system_sev erity trap critical Command: config system_sev erity trap critical Success. DGS-3324SRi:4# show system_severity Purpose To display the current severity settings set on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 75 10 M UL TIPLE S P ANNING T REE P ROT OCOL (MSTP) C OMM ANDS This switch supports three versions of the Spanning Tree Pr otocol; 802.1d STP, 802.1w Rapid STP and 802.1s MSTP.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 76 Command Parameters config stp priority <value 0-61440> instance_id <value 0-15> config stp mst_config_id.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 77 DGS-3324SRi:4#disable stp Command: disable stp Success. DGS-3324SRi:4# config stp version Purpose Used to globally set the version of STP on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 78 config stp Parameters maxage <value 6-40> − This value may be set to ensure that old information does not endlessly circulate through redundant paths in the network, preventing the effective propagation of the new information.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 79 config stp ports Purpose Used to setup STP on the port level. Syntax config stp ports <portlist> {externalCost.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 80 config stp ports p2p [true | false | auto] – true indicates a point-to-point (P2P) shared link. P2P ports are similar to edge ports however they are restricted in that a P2P port must operate in full-duplex.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 81 config stp instance_id Purpose Used to add or delete an STP instance ID.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 82 delete stp instance_id Purpose Used to delete a STP in stance ID from the Switch. Syntax delete stp instance_id <value 1-15> Description This command allows the user to delete a previously configured STP instance ID from the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 83 config stp mst_config_id Purpose Used to update the MSTP configuration identification.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 84 config stp mst_ports Parameters <portlist> - Specifies a port or range of ports to be configured. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 85 Example usage: To display the status of STP on t he Switch: Status 1: STP enabled with STP compatible version DGS-33.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 86 show stp ports Purpose Used to display the Switch’s current instance_id configuration. Syntax show stp ports <portlist> Description This command displays the STP Instance Settings and STP Instance Operational Status curr ently implemented on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 87 DGS-3324SRi:4#show stp instance 0 Command: show stp instance 0 STP Instance Settings --------------------------- Ins.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 88 11 F ORW ARDING D A T ABASE C OMM ANDS The forwarding database comma nds in the Comma nd Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 89 DGS-3324SRi:4#create fdb default 00-00-00-00-01-02 port 2:5 Command: create fdb default 00-00-00-00-01-02 port 2:5 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 90 config multicast_fdb Parameters <vlan_name 32> − The name of the VLAN on which the MAC address resides. <macaddr> − The MAC address that will be added to the multicast forwarding table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 91 Example usage: To set the fdb aging time: DGS-3324SRi:4#config fdb aging_time 300 Command: config fdb aging_time 300 Success. DGS-3324SRi:4# delete fdb Purpose Used to delete an entry to the Switch’s forwarding database.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 92 clear fdb Purpose Used to clear the Switch’s forwarding database of all dynamically learned MAC addresses.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 93 DGS-3324SRi:4#show multicast_fdb Command: show multicast_fdb VLAN Name : default MAC Address : 01-00-5E-00-00-00 Egr.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 94 DGS-3324SRi:4#show fdb Command: show fdb Unicast MAC Address Aging Time = 300 VID VLAN Name MAC Address Port Type --.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 95 DGS-3324SRi:4#show ipfdb Command: show ipfdb Interface IP Address Port Learned ------------ --------------- ------ ------------ System 10.0.0.1 1:13 Dy namic System 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 96 show fdb destination_hit Purpose To view the destination hit status of the Switch. Syntax show fdb destination_hit Description This command will allow users to view the destination hit status of the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 97 12 B ROADCAST S TOR M C ONTROL C OM MANDS The broadcast storm control comm ands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following tab le.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 98 DGS-3324SRi:4#config traffic control all broadcast enable Command: config traffic control all broadcast enable Success. DGS-3324SRi:4# show traffic control Purpose Used to display current traffic control settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 99 13 Q O S C OMM ANDS The xStack DGS/DXS-3300 series support 802.1p priority queuing. These switches has ei ght classes of service for each port on the Switch, one of which i s internal and unconfigurable to th e user.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 100 Command Parameters show bandwidth_control {<portlist>} config scheduling <class_id 0-6> {max_packet <value 0-15>} show scheduling config 802.1p user_priority {<pr iority 0-7> <class_id 0-6>} show 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 101 Example usage: To configure bandwidth control: DGS-3324SRi:4#config bandw idth_control 1:1-1:10 tx_rate 10 Command: config bandw idth_control 1:1-1:10 tx_rate 10 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 102 config scheduling Purpose Used to configure traffic schedu ling for each of the Switch’s hardware priority classes.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 103 NOTICE: The default QoS scheduling arrangement is a strict priority schedule. To customize scheduling to set up weighted or round-robin class clearing, the max_packets values need to be changed.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 104 DGS-3324SRi:4# show scheduling Command: show scheduling QOS Output Scheduling MAX. Packets ------------------- Class-0 1 Class-1 0 Class-2 3 Class-3 4 Class-4 5 Class-5 6 Class-6 7 DGS-3324SRi:4# config 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 105 show 802.1p user_priority Purpose Used to display the current 802.1p us er priority tags to hardware priority class of service mapping in use by the Switch. Syntax show 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 106 Example usage: To configure 802.1p default priority on the Switch: DGS-3324SRi:4#config 802.1p default_priority all 5 Command: config 802.1p default_priority all 5 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 107 1:18 0 1:19 0 1:20 0 1:21 0 1:22 0 1:23 0 1:24 0 DGS-3324SRi:4# config scheduling_mechanism Purpose Used to configu.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 108 show scheduling_mechanism Purpose Used to display the current traffic scheduling mechanisms in use on the Switch. Syntax show scheduling_mechanism Description This command will display the current traffic scheduling mechanisms in use on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 109 disable hol_prevention Purpose Used to disable HOL prevention. Syntax disable hol_prevention Description The disable hol_prevention command disables Head of Line prevention.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 110 14 P ORT M IRRORING C OMM ANDS The port mi rroring comm ands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 111 To add the mirrori ng ports: DGS-3324SRi:4# config mirror port 1:10 add source ports 1:1-1:5 both Command: config mirror port 1:10 add source ports 1:1-1:5 both Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 112 DGS-3324SRi:4#config mirror port 1:10 delete source port 1:1-1:5 both Command: config mirror 1:10 delete source 1:1-1:5 both Success. DGS-3324SRi:4# enable mirror Purpose Used to enable a previously entered port mirroring configuration.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 113 show mirror Purpose Used to show the current port mirroring configuration on the Switch. Syntax show mirror Description This command displays the current port mirroring configuration on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 114 15 VLAN C OMM ANDS The xStack DGS/DXS-3300 series now inco rporates protocol-based VLANs.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 115 create vlan Purpose Used to create a VLAN on the Switch. Syntax create vlan <v lan_name 32> {tag <vlanid 2.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 116 create vlan protocol-ipxEthernet2 - Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet header is concurrent with this protocol.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 117 create vlan encap [ethernet | llc | snap | all] – Specifies that the Switch will examine the octet of the packet header referring to one of the protocols listed (Ethernet, LLC or SNAP), looking for a match of the hexadecimal value previously entered .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 118 To remove the VLAN “v1”: DGS-3324SRi:4#delete vlan v 1 Command: delete vlan v1 Success. DGS-3324SRi:4# config vlan add Purpose Used to add additional ports to a previously configured VLAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 119 config vlan delete Purpose Used to delete ports from a previously configured VLAN. Syntax config vlan <vlan_name 32> delete <portlist> Description This command is used to delete por ts from the port list of a previously configured VLAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 120 config gvrp Parameters <portlist> − A range of ports for which to configure GVRP. The port list is specified by listing the lo west switch number and the beginning port number on that switch, separat ed by a colon.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 121 DGS-3324SRi:4#enable gvrp Command: enable gvrp Success. DGS-3324SRi:4# disable gvrp Purpose Used to disable GVRP on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 122 DGS-3324SRi:4#show vlan Command: show vlan VID : 1 VLAN Name : default VLAN TYPE : 1QVLAN Protocol ID : UserDefined.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 123 DGS-3324SRi:4#show gvrp Command: show gvrp Global GVRP : Disabled Port PVID GVRP Ingress Checking Acceptable Frame .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 124 16 L INK A GGREGA TION C OMM ANDS The link aggregation comma nds in the Command Line Interface (CL I) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 125 DGS-3324SRi:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DGS-3324SRi:4# delete link_aggregation group_id Purpose Used to delete a previously configured link aggregation group.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 126 config link_aggregation master_port <port> − Master port ID. Specif ies which port (by port number) of the link aggregation group will be the master port. All of the ports in a link aggregation group will share the port configuration with the master port.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 127 config link_aggregation algorithm ip_source − Indicates that the Switch should examine the IP source address. ip_destination − Indicates that the Swit ch should examine the IP destination address.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 128 config lacp_port Purpose Used to configure setti ngs for LACP compliant ports.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 129 show lacp_port Purpose Used to display current LACP port mode settings. Syntax show lacp_port {<portlist>} Description This command will display the LACP mode settings as they are currently configured.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 130 17 IP C OMM ANDS (I NCLUDING IP M UL TINETTING ) IP Multinetting is a function that allows multiple IP interfaces to be assigned to the same VLAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 131 create ipif Purpose Used to create an IP interface on the Switch. Syntax create ipif <ipif_name 12> <netw ork_address> <vlan_name 32> {secondary | {state [enable | disable]} Description This command will create an IP interface.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 132 config ipif Purpose Used to configure an IP interface set on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 133 To enable the ipif fun ction on the Switch: DGS-3324SRi:4#enable ipif s2 Command: enable ipif s2 Success. DGS-3324SRi:4# disable ipif Purpose Used to disable the configurat ion of an IP interface on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 134 DGS-3324SRi:4#delete ipif s2 Command: delete ipif s2 Success. DGS-3324SRi:4# show ipif Purpose Used to display the configurat ion of an IP interface on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 135 18 IGMP C OMM ANDS (I NCLUDING IGMP V 3) IGMP or Internet Group Management Protoc ol is a protocol implem ented by .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 136 config igmp Purpose Used to configure IGMP on the Switch. Syntax config igmp [ipif <ipif_name 12> | all] {ver.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 137 To display IGMP confi gurations: DGS-3324SRi:4#show igmp Command: show igmp IGMP Interface Configurations Interface.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 138 DGS-3324SRi:4#show igmp group group 224.0.1.1 ipif System Command: show igmp group group 224.0.1.1 ipif System IGMP Group Detail Information Interface : System Multicast Group : 224.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 139 19 IGMP S NOOPING C OM MANDS The IGMP Snooping comma nds in the Comma nd Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 140 config igmp_snooping host_timeout <sec 1-16711450> − Specifies the maximum amount of time a host can be a member of a multicas t group without the Switch receiving a host membership report.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 141 config igmp_snooping querier between general query transmissions. The default setting is 125 seconds. max_response_time <sec 1-25> − Specifies the maximum time in seconds to wait for reports from members.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 142 enable igmp_snooping Purpose Used to enable IGMP snooping on the Switch. Syntax enable igmp_snooping {forward_mcrouter_only} Description This command allows the user to enable IGMP snooping on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 143 config router_ports Purpose Used to configure ports as router ports. Syntax config router_ports <vlan_name 32> [add | delete] <portlist> Description This command allows desi gnation of a range of ports as being connected to multicast-enabled router s.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 144 config router_ports_forbidden Parameters <vlan_name 32> − The name of the VLAN on which the router port resides. [add | delete] - Specifies whether to add or delete forbidden ports of the specified VLAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 145 DGS-3324SRi:4#show router_ports Command: show router_ports VLAN Name : default Static router port : 2:1-2:10 Dynami.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 146 DGS-3324SRi:4#show igmp_snooping Command: show igmp_snooping IGMP Snooping Global State : Disabled Multicast router.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 147 DGS-3324SRi:4#show igmp_snooping group Command: show igmp_snooping group VLAN Name : default Multicast group: 224.0.0.2 MAC address : 01-00-5E-00-00-02 Reports : 1 Port Member : 1:26,2:7 VLAN Name : default Multicast group: 224.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 148 To view the IGMP snooping forwarding t able for VLAN “Trinity”: DGS-3324SRi:4#show igmp_snooping forw arding vlan Trinity Command: show igmp_snooping forw arding vlan Trinity VLAN Name : Trinity Multicast group : 224.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 149 20 MAC N OTIFICA TION C OMM ANDS The MAC notification commands in the Co mm and Line Interface (CLI) are listed, in the following table, along with their appropriate param eters.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 150 Example Usage: To disable MAC noti fication without changi ng basic configuration: DGS-3324SRi:4#disable mac_notification Command: disable mac_notification Success. DGS-3324SRi:4# config mac_notification Purpose Used to configure MAC address notification.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 151 config mac_notification ports [enable | disable] – These commands will enable or disable MAC address table notification on the Switch. Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 152 show mac_notification ports Purpose Used to display the Switch’s MAC address table not ification status settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 153 21 A CCESS A UTHENTICA TION C ONTROL C OMM ANDS The Access Authentication Control comma nds allows secure access to the Switch us ing the TACACS / XTACACS / TACACS+ and RADIUS protocols.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 154 The Access Authentication Control comma nds in the Command Line Interface (CLI) ar e listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 155 Command Parameters enable admin config admin local_enable <password 15> Each command is listed, in detail, in the followin g sections. enable authen_policy Purpose Used to enable system access authentication policy.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 156 show authen_policy Purpose Used to display the system access authentication policy status on the Switch. Syntax show authen_policy Description This command will show t he current status of the access authentication policy on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 157 config authen_login Purpose Used to configure a user-defined or default method list of authentication methods for user login.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 158 config authen_login method_list_name – Enter a previously implemented method list name defined by the user.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 159 delete authen_login method_list_name Purpose Used to delete a previously configured user defined method list of authentication methods for users logging on to the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 160 show authen_login Parameters default – Entering this parameter will display the default method list for users logging on to the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 161 config authen_enable Purpose Used to configure a user- defined method list of authentication methods for promoting normal user level privileges to Administrator level privileges on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 162 config authen_enable method_list_name – Enter a previously implemented method list name defined by the user ( create authen_enable ).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 163 delete authen_enable method_list_name Purpose Used to delete a user-defined method list of authentication methods for promoting normal user level pr ivileges to Administrator level privileges on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 164 show authen_enable Parameters default – Entering this parameter will display the default method list for users attempting to gain access to Administrator level privileges on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 165 config authen application login – Use this parameter to configure an application for normal login on the user level, using a pr eviously configured method list.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 166 create authen server_host Purpose Used to create an authentication server host.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 167 DGS-3324SRi:4#create authen server_host 10.1.1.121 protocol tacacs+ port 1234 timeout 10 retransmit 5 Command: create authen server_host 10.1.1.121 protocol tacacs+ port 1234 timeout 10 retransmit 5 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 168 config authen server_host timeout <int 1-255> - Enter the time in seconds the Switch will wait for the server host to reply to an authentication request. The default value is 5 seconds.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 169 DGS-3324SRi:4#delete authen server_host 10.1.1.121 protocol tacacs+ Command: delete authen server_host 10.1.1.121 protocol tacacs+ Success. DGS-3324SRi:4# show authen server_host Purpose Used to view a user- defined authentication server host.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 170 create authen server_group Purpose Used to create a user-def ined authentication server group. Syntax create authen server_group <string 15> Description This command will create an aut hentication server group.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 171 config authen server_group tacacs – Use this parameter to utilize the built-in TACACS server protocol on the Switch . Only server hosts utilizing the TACACS protocol may be added to this group.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 172 Example usage: To delete the server group “group_1”: DGS-3324SRi:4#delete server_group group_1 Command: delete server_group group_1 Success. DGS-3324SRi:4# show authen server_group Purpose Used to view authenticati on server groups on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 173 config authen parameter response_timeout Parameters response_timeout <int 0-255> - Set the time, in seconds, the Switch will wait for a response of authenticat ion from the user attempting to log in from the command line interface or telnet interface.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 174 To set the maximum number of authentication attempts at 5: DGS-3324SRi:4#config authen parameter attempt 5 Command: config authen parameter attempt 5 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 175 enable admin Parameters None. Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 176 22 SSH C OMM ANDS The steps required to use the SSH protocol for secure com munica tion between a remote PC (the SS.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 177 enable shh Purpose Used to enable SSH. Syntax enable ssh Description This command will enable SSH on the Switch. Parameters None. Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 178 config ssh authmode Parameters password – This parameter may be c hosen if the administrator wishes to use a locally configured password for authentication on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 179 config ssh server Purpose Used to configure the SSH server. Syntax config ssh server {maxsession <int 1-3> | .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 180 DGS-3324SRi:4# show ssh server Command: show ssh server SSH Server Status : Disabled SSH Max Session : 3 Connection.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 181 show ssh user authmode Purpose Used to display the SSH user setting. Syntax show ssh user authmode Description This command will displa y the current SSH user setting.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 182 config ssh algorithm twofish128 - This parameter will enable or disable the twofish128 encryption algorithm. twofish192 - This parameter will enable or disable the twofish192 encryption algorithm.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 183 DGS-3324SRi:4#show ssh algorithm Command: show ssh algorithm Encryption Algorithm ---------------------------------.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 184 23 SSL C OMM ANDS Secure Sockets Layer or SSL is a security feature that will prov ide a secure communication path between a host and client through the use of authentication, digital si gnatures and encryption.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 185 enable ssl Purpose To enable the SSL function on the Switch. Syntax enable ssl {ciphersuite {RSA_w ith_RC4_128_MD5 .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 186 NOTE: Enabling the SSL function on the Sw itch will disable the port for the web manager (port 80). To log on to the web based manager, the entry of your URL must begin with https:// .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 187 config ssl cachetimeout Purpose Used to configure the SSL cache timeout. Syntax config ssl cachetimeout <value 60-86400> Description This command will set the time between a new key exchange between a client and a host using the SSL function.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 188 show ssl Purpose Used to view the SSL status and the certificate file status on the Switch. Syntax show ssl {certificate} Description This command is used to view the SSL status on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 189 download certificate_fromTFTP certfilename <path_filename 64> - Enter the path and the filename of the certificate file to download. keyfilename <path_filename 64> - Enter the path and the filename of the key exchange file to download.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 190 24 802.1X C OMM ANDS The xStack DGS/DXS-3300 series implem ent the server-side of the IEEE 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 191 Each command is listed, in detail, in the followin g sections. enable 802.1x Purpose Used to enable the 802.1x server on the Switch. Syntax enable 802.1x Description The enable 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 192 create 802.1x user Purpose Used to create a new 802.1x user. Syntax create 802.1x user <username 15> Description The create 802.1x user command is used to create new 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 193 delete 802.1x user Purpose Used to delete an 802.1x user account on the Switch. Syntax delete 802.1x user <username 15> Description The delete 802.1x user command is used to delete the 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 194 show 802.1x auth_configuration Port Control: ForceAuth/ForceUnauth/Auto − Shows the administrative control over the port’s authorization status. ForceAuth forces the Authenticator of the port to become Authorized.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 195 show 802.1x auth_state Purpose Used to display the current authent ication state of t he 802.1x server on the Switch. Syntax show 802.1x auth_state {ports [<portlist> | all]} Description The show 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 196 DGS-3324SRi:4#show 802.1x auth_state Command: show 802.1x auth_state Port Auth PAE State Backend State Port Status .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 197 config 802.1x auth_mode Purpose Used to configure the 802.1x authentication mode on the Switch. Syntax config 802.1x auth_mode {port_based | mac_based] Description The config 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 198 DGS-3324SRi:4#config 802.1x capability ports 1:1 – 1:10 authenticator Command: config 802.1x capability ports 1:1 – 1:10 authenticator Success. DGS-3324SRi:4# config 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 199 config 802.1x auth_parameter tx_period <sec 1-65535> - Configures the time to wait for a response from a supplicant (u ser) to send EAP Request/Identity packets.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 200 DGS-3324SRi:4# config 802.1x auth_protocol local Command: config 802.1x auth_protocol local Success. DGS-3324SRi:4# config 802.1x init Purpose Used to initialize the 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 201 DGS-3324SRi:4# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success. DGS-3324SRi:4# config 802.1x reauth ports Purpose Used to configure the 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 202 To configure 802.1x reauthenticati on for ports 1-18 on switch 1: DGS-3324SRi:4#config 802.1x reauth port_based ports 1:1-1:18 Command: config 802.1x reauth port_based ports 1:1-1:18 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 203 config radius delete Purpose Used to delete a previously entered RADIUS server configuration. Syntax config radius delete <server_index 1-3> Description The config radius delete command is used to delete a previously entered RADIUS server configuration.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 204 DGS-3324SRi:4# config radius 1 ipaddress 10.48.74.121 key dlink Command: config radius 1 ipaddress 10.48.74.121 key dlink Success. DGS-3324SRi:4# show radius Purpose Used to display the current RA DIUS configurations on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 205 DGS-3324SRi:4#show acct_client Command: show acct_client radiusAcctClient -----------------------------------------.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 206 DGS-3324SRi:4#show auth_client Command: show auth_client radiusAuthClient -----------------------------------------.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 207 DGS-3324SRi:4#show auth_diagnostics ports 1:16 Command: show auth_diagnostics ports 1:16 Port number : 1:16 EntersC.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 208 DGS-3324SRi:4#show auth_session_statistics ports 1:16 Command: show auth_session_statistics ports 1:16 Port number .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 209 DGS-3324SRi:4#show auth_statistics ports 1:16 Command: show auth_statistics ports 1:16 Port number : 1:16 EapolFram.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 210 25 A CCESS C ONTROL L IST (ACL) C OMM ANDS The xStack DGS/DXS-3300 series implement Access Control Lists that enable the Sw itch to deny network access to specific devices or device groups based on IP settings, MAC address, packet content, IPv6 settings or CPU.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 211 Command Parameters 0xffffffff> <hex 0x0-0xffffffff> | {offset 64-79 <hex 0x0-0xffffffff> <hex 0x0.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 212 access_id gives the rule a higher priority. In case of a conflict in the rules entered for an access profile, the rule with the highest priority (lowest access_id ) will take precedence.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 213 Command Parameters create access_profile [ethernet {vl an | source_mac <macmask 000000000000- ffffffffffff> | destination_mac <mac mask 000000000000- ffffffffffff> | 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 214 create access_profile (for Ethernet) Purpose Used to create an access profile on the Switch by examining the Ethernet part of the packet header. Masks entered can be combined with the values the Switch finds in the specified frame header fields.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 215 config access_profile profile_id (for Ethernet) Syntax config access_profile profile_id <value 1-8> [add acce.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 216 config access_profile profile_id (for Ethernet) permit – Specifies that packets that match the access profile are permitted to be forwarded by the Switch. • priority <value 0-7> − This parameter is specified to re-write the 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 217 create access_profile (IP) Purpose Used to create an access profile on the Switch by examining the IP part of the packet header. Masks entered can be combined with the values the Switch finds in the s pecified frame header fields.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 218 create access_profile (IP) • flag_mask [all | {urg | ack | psh | rst | syn | fin}] – Enter the appropriate flag_mask parameter. All incoming packets have TCP port numbers contained in them as the forwarding criterion.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 219 config access_profile profile_id (IP) Description This command is used to define the ru les used by the Switch to either filter or forward packets based on t he IP part of each packet header.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 220 config access_profile profile_id (IP) • flag_mask – Enter the type of TCP flag to be masked.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 221 config access_profile profile_id (IP) mirror - Selecting mi rror specifies that packets that match the access profile are mirrored to a port defined in the config mirror port command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 222 create access_profile (packet content mask) Description This command is used to ident ify packets by examining the Ethernet packet header, by byte and then decide w hether to filter or forward it, based on the user’s configuration.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 223 config access_profile profile_id (packet content mask) 0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffff.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 224 config access_profile profile_id (packet content mask) permit – Specifies that packets that match the access profile are permitted to be forwarded by the Switch. • priority <value 0-7> − This parameter is specified to re-write the 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 225 create access_profile (ipv6) Purpose Used to create an access profile on the Switch by examining the IPv6 part of the packet header. Masks can be entered that will be combined with the values the Switch finds in the specified frame header fields.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 226 config access_profile profile_id (ipv6) Syntax config access_profile profile_id <value 1-8> add access_id {au.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 227 config access_profile profile_id (ipv6) • priority <value 0-7> − This parameter is specified to re-write the 802.1p default priority previously set in the Switch, which is used to determine the CoS queue to which packets are forwarded to.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 228 delete access_profile Parameters profile_id <value 1-8> − Enter an integer between 1 and 8 that is used to identify the access profile that will be deleted with this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 229 ====================================================================== Access Profile ID: 2 TYPE : IP =============.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 230 create cpu access_profile Syntax create cpu access_profile [ethernet {vlan | source_mac <macaddr 000000000000-ffffffffffff>| destinati on_mac <macaddr 000000000000- ffffffffffff> | 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 231 create cpu access_profile • igmp − Specifies that the Switch w ill examine each frame’s Internet Group Management Protocol (IGMP) field. • type − Specifies that the Switch will examine each frame’s IGMP Type field.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 232 create cpu access_profile • class – Entering this parameter will instruct the Switch to examine the class field of the IPv6 header. This class field is a part of the packet header that is similar to the Type of Service (ToS) or Precedence bits field in IPv4.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 233 config cpu access_profile Purpose Used to configure a CPU access prof ile used for CPU Interface Filtering and to define specific values that will be used to by the Switch to determine if a given packet should be forwarded or filtered.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 234 config cpu access_profile • ethernet_type <hex 0x0-0x ffff> − Specifies that the access profile will apply only to packets with this hexadecimal 802.1Q Ethernet type value in the packet header.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 235 config cpu access_profile • packet_content_mask – Specifies that the Switch will mask the packet header beginning with the offset value specified as follows: • offset_0-15 - Enter a value in hex form to mask the packet from byte 0 to byte 15.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 236 enable cpu_interface_filtering Purpose Used to enable CPU interface filtering on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 237 To show the CPU filtering state o n the Switch: DGS-3324SRi:4#show cpu access_profile Command: show cpu access_prof.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 238 26 T RAFFIC S EGMENT A TION C OMM ANDS Traffic segmentation allows furt her sub-division of VLANs into sm aller groups of ports that w ill help to reduce traffic on the VLAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 239 show traffic_segmentation Purpose Used to display the current tr affic segmentation configuration on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 240 27 S T ACKING C OMMANDS The stacking configuration comma nds in th e Comm and Line Interface (CLI) are listed (a long with the appropriate parameters) in the following tab le.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 241 config box_id Purpose Used to configure box ID. Us ers can use this command to reassign box IDs.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 242 Usage Example: To configure box type: DGS-3324SRi:4#config box_type current_box_id 3 ty pe BOX_NOTEXIST Command: config box_type current_box_id 3 ty pe BOX_NOTEXIST Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 243 DGS-3324SRi:4#show stack_information Command: show stack_information Box User Prio- Prom Runtime H/W ID Set Type Exist rity version version version --- ---- ----------- ----- ----- -------- -------- -------- 1 AUTO DGS-3324SRi exi st 16 2.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 244 28 D-L INK S INGLE IP M ANAGEM ENT C OMMANDS Simply put, D-Link Single IP Management is a con cept that will stack switches together over Ethernet in stead of usin g stacking ports or m odules.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 245 b. If report packets from the CS to the MS time out. 5. The user can manually configure a CaS to becom e a CS 6. The CaS can be configured through the CS t o become a MS.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 246 Command Parameters config sim [{[commander {group_nam e <groupname 64> | candidate] | dp_interval <sec 30-.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 247 show sim Purpose Used to view the current information regarding the SIM group on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 248 DGS-3324SRi:4#show sim Command: show sim Group Name : default SIM Version : VER-1.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 249 ID MAC Address Platform / Hold Firmw a re Device Name Capability Time Version --- ----------------- ------------------------ ----- --------- ---------------- 2 00-55-55-00-55-00 DXS-3350 L3 Sw itch 140 4.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 250 DGS-3324SRi:4#reconfig member_id 2 Command: reconfig member_id 2 DGS-3324SRi:4# config sim_group Purpose Used to add candidates and delete members from the SIM group.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 251 config sim Purpose Used to configure role param eters for the SIM protocol on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 252 DGS-3324SRi:4#config sim candidate Command: config sim candidate Success. DGS-3324SRi:4# To transfer the Switch to be a comma nder: DGS-3324SRi:4#config sim commander Command: config sim commander Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 253 Example usage: To download firmware: DGS-3324SRi:4# dow nload sim_ms firm w are 10.53.13.94 c:/dgssri.had all Command: dow nload sim_ms firmw are 10.53.13.94 c:/dgssri.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 254 upload sim_ms configuration Parameters configuration_to_tftp – Choose this parameter to upload configuration files from SIM members to a TFTP server. log_to_tftp - Choose this parameter to upload log files from SIM members to a TFTP server.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 255 DGS-3324SRi:4#upload sim_ms log_ to_tftp 10.55.47.1 D:log.txt all Command: upload sim_ms log_to_tftp 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 256 29 T IME AND SNTP C OMM ANDS The Simple Net work Time Protocol (SNTP) {an adapt ation of the Network Time Protocol (NTP)} commands in the Comm and Line Interface (CLI) are listed (along with the a ppropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 257 disable sntp Purpose Disables SNTP server support. Syntax disable sntp Description This will disable SNTP s upport. SNTP service must be separately configured (see config sntp).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 258 DGS-3324SRi:4#config sntp primary 10.1. 1.1 secondary 10.1.1.2 poll-interval 30 Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success. DGS-3324SRi:4# show sntp Purpose Used to display the SNTP information.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 259 To manually set system time and date settings: DGS-3324SRi:4#config time 30jun2003 16:30:30 Command: config time 30jun2003 16:30:30 Success. DGS-3324SRi:4# config time zone Purpose Used to determine the time zone used in order to adjust the system clock.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 260 config dst Description DST can be enabled and configured using this command. When enabled this will adjust the system clock to comply with any DST requirement. DST adjustment effects system time for both manually configured time and time set using SNTP service.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 261 config dst subtract during the summertime. The possible offset times are 30, 60, 90, 120. The default value is 60. Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 262 30 ARP C OM MANDS The ARP comma nds in the Command Line Inte rface (CLI) are listed (along with the a ppropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 263 Example Usage: To delete an entry of IP address 10.48.74.121 from the ARP table: DGS-3324SRi:4#delete arpentry 10.48.74.121 Command: delete arpentry 10.48.74.121 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 264 To display the ARP table : DGS-3324SRi:4#show arpentry Command: show arpentry ARP Aging Time : 30 Interface IP Address MAC Address Type ------------- --------------- ----------------- --------------- System 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 265 31 VRRP C OM MANDS VRRP or Virtual Routing Redundancy Prot ocol is a function on the Switch that dynami cally assigns responsibility for a virtual router to one of the VRRP routers on a LAN.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 266 Example Usage: To enable VRRP globally on the Switch: DGS-3324SRi:4#enable vrrp Command: enable vrrp Success. DGS-3324SRi:4# Example usage: To enable the virtual IP address to be pi nged: DGS-3324SRi:4#enable vrrp ping Command: enable vrrp ping Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 267 create vrrp vrid Purpose To create a VRRP router on the Switch. Syntax create vrrp vrid <v rid 1-255> ipif &l.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 268 create vrrp vrid critical_ip <ipaddr> - Enter the IP address of the physical device that will provide the most direct route to t he Internet or other critical network connections from this virt ual router.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 269 config vrrp vrid highest physical IP address as the Master router. The default value is 100. (The value of 255 is reserved for the router that owns the IP address associated with the virtual router and is therefore set automatically.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 270 config vrrp ipif Purpose To configure the authentication type for the VRRP routers of an IP interface.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 271 Example Usage: To v iew the global VRRP settings currently implemented on the Switch (VRRP En abled): DGS-3324SRi:4.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 272 32 R OUTING T ABLE C OMMANDS The routing table comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 273 create iproute default Purpose Used to create IP route entries to the Switch’s IP routing table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 274 delete iproute default Purpose Used to delete a default IP route entry from the Switch’s IP routing table. Syntax delete iproute default <ipaddr> Description This command will delete an exis ting default entry from the Switch’s IP routing table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 275 33 R OUTE R EDISTRIBUTION C OMM ANDS The route redistribution comma nds in the Comma nd Line Interface (CLI) are listed (al ong with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 276 Route Source Metric Metric Type RIP 0 to 16777214 mettype 1 mettype 2 Static 0 to 16777214 mettype 1 mettype 2 Local 0 to 16777214 mettype 1 mettype 2 Allowed Metric Type combinations are mettype 1 or mettype 2 .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 277 Routing inform ation source − OSPF and the Static Route table. Routing information will be redi stributed to RIP.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 278 config route redistribute dst ospf src Parameters src [static | rip | local] − Allows the selection of the protocol of the source device. mettype − allows the selection of one of the methods for calculating the metric value.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 279 config route redistribute dst rip src information is then exchanged among the various routers according to the individual router s current routing protocol.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 280 delete route redistribute Parameters dst [rip | ospf] − Allows the selection of the protocol on the destination device. The user may choose between RIP and OSPF. src [rip | static | local | ospf] − Allows the selection of the protocol on the source device.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 281 34 BOOTP R ELA Y C OM MANDS The BOOTP relay comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 282 config bootp_relay add Purpose Used to add an IP destination address to the Switch’s BOOTP relay table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 283 enable bootp_relay Purpose Used to enable the BOOTP relay function on the Switch. Syntax enable bootp_relay Description This command, in combination with the disable bootp_relay command below, is used to enable and disable the BOOTP relay function on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 284 show bootp_relay Purpose Used to display the current BOOTP relay configuration.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 285 35 DNS R ELA Y C OMM ANDS The DNS relay comma nds in the Comm and Line Interface (CLI) ar e listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 286 To add an entry domai n name dns1, IP address 10.43.21.12 to DNS stat ic table: DGS-3324SRi:4#config dnsr add static dns1 10.43.21.12 Command: config dnsr add static dns1 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 287 DGS-3324SRi:4#enable dnsr cache Command: enable dnsr cache Success. DGS-3324SRi:4# Example Usage: To enable static ta ble lookup for DNS relay. DGS-3324SRi:4#enable dnsr static Command: enable dnsr static Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 288 DGS-3324SRi:4#disable dnsr cache Command: disable dnsr cache Success. DGS-3324SRi:4# Example Usage: To disable static t able lookup for DNS relay. DGS-3324SRi:4#disable dnsr static Command: disable dnsr static Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 289 36 RIP C OM MANDS The RIP comma nds in the Command Line Inte rface (CLI) are listed (along with the a ppropriate param eters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 290 config rip rx_mode − Determines how received RIP packets will be interpreted – as RIP version V1 only, V2 Only , or V1 or V2 . This entry specifies which vers ion of the RIP protocol will be used to receive RIP packets.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 291 config rip timer Restrictions Only administrator-lev el users can issue this command.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 292 DGS-3324SRi:4#disable rip Command: disable rip Success. DGS-3324SRi:4# show rip Purpose Used to display the RIP c onfiguration and statistics for the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 293 37 DVMRP C OM MANDS The DVMRP comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 294 config dvmrp neighbor_timeout <second 1-65535> − The time period for which DVMRP will hold Neighbor R outer reports before issuing poison route messages. The default value is 35 seconds.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 295 DGS-3324SRi:4#disable dvmrp Command: disable dvmrp Success. DGS-3324SRi:4# show dvmrp routing_table Purpose Used to display the current DVMRP routing table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 296 Example Usage: To display DVMR P neighbor table: DGS-3324SRi:4#show dvmrp neighbor Command: show dvmrp neighbor DVM.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 297 show dvmrp Purpose Used to display the curr ent DVMRP settings on the Switch. Syntax show dvmrp {<ipif_name 12>} Description The command will display the current DVMRP routing table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 298 38 PIM C OMM ANDS PIM or Protocol Indep endent Multicast is a method of forwarding traffic to m ulti cast groups over the network using any pre- existing unicast routing protocol, such as RIP or OSPF, set on routers within a multicast network.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 299 Register and Register Suppression Messages Multicast sources do not always join the intended receiver group.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 300 Command Parameters config pim crp {holdtime <value 0-255> | priority <value 0-255> | wildcard_prefix_cn.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 301 DGS-3324SRi:4# disable pim Purpose Used to disable PIM function on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 302 config pim mode [dm | sm] - Used to select the type of PIM protocol to use, Sparse Mode (SM) or Dense Mode (DM).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 303 config pim register_suppression_time Purpose Used to configure the interval between the sending of register packets for the PIM protocol.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 304 DGS-3324SRi:4#create pim crp group 231.0.0.1/32 rp Trinity Command: create pim crp group 231.0.0.1/32 rp Trinity Success. DGS-3324SRi:4# delete pim crp Purpose To disable the Switch in becoming a possible candidate to be the Rendezvous Point (RP).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 305 config pim crp the router having the higher IP address will become the RP.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 306 delete pim static_rp Purpose To remove the multicast gr oup IP address used in identifying the Rendezvous Point (RP).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 307 config pim rp_spt_threshold Purpose Used to configure the thre shold of register packets needed to enable the Shortest Path Tree (SPT).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 308 DGS-3324SRi:4#config last_hop_spt_threshold 0 Command: config last_hop_spt_threshold 0 Success. DGS-3324SRi:4# show pim rpset Purpose Used to display the RP Set of the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 309 C-RP Holdtime : 150 C-RP Priority : 2 C-RP w ildcard prefix count : 0 Group Interface --------------------- --------------------- 224.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 310 DGS-3324SRi:4#config pim cbsr ipif Trinity priority 4 Command: config pim cbsr ipif Trinity priority 4 Success.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 311 DGS-3324SRi:4# show pim cbsr Command: show pim cbsr PIM Candidate-BSR Table C-BSR Hash Mask Len : 30 C-BSR Bootstrap Period : 2 Interface IP Address Priority --------------------- --------------------- ------------ Trinity 11.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 312 show pim neighbor Purpose Used to display PIM neighbors of the Switch. Syntax show pim neighbor {ipif <ipif_name12> | ipaddress <netw ork_address>} Description This command will display the PIM neighbor table for the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 313 DGS-3324SRi:4# show pim ipmroute Command: show pim ipmroute PIM IP Multicast Route Table UA = Upstream AssertTimer .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 314 DGS-3324SRi:4# create pim register_checksum_include_data rp_ address 11.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 315 DGS-3324SRi:4# show pim register_checksum_include_data_rp_ list Command: show pim register_checksum_include_data_rp_ list RP Address ------------------------------------------- 11.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 316 39 IP M UL TICASTING C OMMANDS The IP multicasting comm ands in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 317 show ipmc Purpose Used to display the IP multicast interface table. Syntax show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim} Description This command will display the cu rrent IP multicast interface table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 318 40 MD5 C ONFIGURA TION C OMM ANDS The MD5 configuration comm ands in the Command Line Interface (C LI) are listed (along with the appropriate param eters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 319 To configure an MD5 Key password: DGS-3324SRi:4#config md5 key 1 taboo Command: config md5 key 1 taboo Success. DGS-3324SRi:4# delete md5 key Purpose Used to delete an entry in the MD5 key table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 320 DGS-3324SRi:4#show md5 Command: show md5 MD5 Key Table Configurations Key-ID Key ------ ---------- 1 dlink 2 develo.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 321 41 OSPF C ONFIGURA TION C OMM ANDS The OSPF configuration comma nds in the Comma nd Line Interface (C LI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 322 Command Parameters show ospf all create ospf virtual_link <area_id> <nei ghbor_id> {hello_interval <.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 323 DGS-3324SRi:4#enable ospf Command: enable ospf Success. DGS-3324SRi:4# disable ospf Purpose Used to disable OSPF on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 324 To show OSPF state: DGS-3324SRi:4#show ospf Command: show ospf OSPF Router ID : 10.1.1.2 State : Enabled OSPF Interface Settings Interface IP Address Area ID State Link Metric Status ------------ ------------------ --------- -------- --------- --------- System 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 325 create ospf area Purpose Used to configure OSPF area settings. Syntax create ospf area <area_id> type [normal.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 326 DGS-3324SRi:4#delete ospf area 10.48.74.122 Command: delete ospf area 10.48.74.122 Success. DGS-3324SRi:4# config ospf area Purpose Used to configure an OSPF area’s settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 327 DGS-3324SRi:4#show ospf area Command: show ospf area Area ID Type Stub Import Summary LSA Stub Default Cost -------------- ------------- ------------------------------------ ------------------- 0.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 328 To delete an OSPF host route: DGS-3324SRi:4#delete ospf host_route 10.48.74.122 Command: delete ospf host_route 10.48.74.122 Success. DGS-3324SRi:4# config ospf host_route Purpose Used to configure OSPF host route settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 329 Host Address Metric Area_ID --------------- --------------- ----------- 10.48.73.21 2 10.1.1.1 10.48.74.122 1 10.1.1.1 Total Entries: 2 DGS-3324SRi:4# create ospf aggregation Purpose Used to configure OSPF area aggregation settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 330 delete ospf aggregation Parameters <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 331 show ospf aggregation Purpose Used to display the curr ent OSPF area aggregation settings. Syntax show ospf aggregation {<area_id>} Description This command will display the current OSPF area aggregation settings.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 332 NOTE: When this command displays a “ * ” (a star symbol) in the OSPF LSDB table for the area_id or the Cost , this is interpreted as “no area ID” for external LSAs, and as “no cost given” for the advertised link.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 333 show ospf virtual_neighbor Purpose Used to display the current OSPF virtual neighbor router table. Syntax show ospf virtual_neighbor {<area_id> <neighbor id>} Description This command will display the current OSPF virtual neighbor router table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 334 config ospf ipif Parameters <ipif_name 12> − The name of the IP interface. area <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 335 config ospf all Purpose Used to configure all of the OSPF interfaces on the Switch at one time.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 336 DGS-3324SRi:4#config ospf all state enable Command: config ospf all state enable Success. DGS-3324SRi:4# show ospf ipif Purpose Used to display the current OSPF interface settings for the specified interface name.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 337 show ospf all Parameters None. Restrictions None. Usage Example: To display the current OSPF interface setti ngs, for all OSPF interfaces on the Switch: DGS-3324SRi:4#show ospf all Command: show ospf all Interface Name: System IP Address: 10.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 338 create ospf virtual_link Parameters <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 339 config ospf virtual_link Parameters <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 340 delete ospf virtual_link Parameters <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 341 DGS-3324SRi:4#show ospf virtual_link Command: show ospf virtual_link Virtual Interface Configuration Transit Virtua.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 342 42 R OUTE P REFERENCE C OMM ANDS Route Preference is a way for routers to se lect the best path when there are two or more different routes to the sam e destination from two different routing protocols.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 343 config route preference Purpose Used to configure the rout e preference of each route type.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 344 show route preference Parameters local – Enter this parameter to view the route preference settings for the local route. static - Enter this parameter to view the route preference settings for the static route.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 345 43 J UMBO F RAM E C OMMANDS Certain switches can support jum bo frames (frames larger than the standard Et hernet frame size of 1518 by tes).
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 346 Example usage: To enable the jumbo fram e function on the Switch: DGS-3324SRi:4#disable jumbo_frame Command: disable jumbo_frame Success. DGS-3324SRi:4# show jumbo_frame Purpose Used to show the status of the jumbo frame function on the Switch.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 347 44 F ILE S YSTEM C OM MANDS File System comm ands are used to configure files stored on a storage accessory located in the Switch, such as a CompactFlash card that can be used with the DGS-3324SRi only .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 348 Example usage: To view the storage media accessory information: DGS-3324SRi:4#show storage_media_info Command: show.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 349 Example usage: To copy a file: DGS-3324SRi:4#copy c:/abc.cfg c:/def.txt Command: copy c:/abc.cfg c:/def.txt processing...100 % Done!! DGS-3324SRi:4# dir Purpose Used to list the files and dire ctories on the storage media accessory.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 350 To delete a file: DGS-3324SRi:4#erase c:/aaa.cfg Command: erase c:/aaa.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 351 md Purpose To create a directory. Syntax md <pathname 64> Description This command is used to make a new directory on the storage media accessory. Parameters <pathname 64> - Enter the path and name of the file to be created.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 352 rd Purpose Used to delete a directory from the storage media accessory. Syntax rd {<pathname 64>} Description This command is used to delete a directory listed on the storage media accessory.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 353 rename Purpose To rename a file. Syntax rename <source_path_filename 64> <target_path_filename 64> Description This command is used to rename a filename located on the storage media accessory.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 354 45 C OMM AND H ISTORY L IST The command history list com mands in the Co mmand Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 355 To display the parameters for a specific comm and: DGS-3324SRi:4#? config stp Command:? config stp Command: config .
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 356 config command_history Purpose Used to configure the command history. Syntax config command_history <v alue 1-40> Description This command is used to configure the command history.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 357 A T ECHNICAL S PECIFICA TIONS Physical and Environmental AC Input & External Redundant Power Supply: 100 – 120; 200 - 240 VAC, 50/60 Hz (internal universal power supply) Power Consumption: DGS-3324SR/ DGS-3324SRi - 90 watts maximum DXS-3326GSR – 88.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 358 General Standards: IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.1D Spanning Tree IEEE 802.1w Rapid Spanning Tree IEEE 802.1s Multiple Spanning Tree IEEE 802.
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet S witch CLI Manual 359 Performance Transmission Method: Store-and-forward RAM Buffer: DGS-3324SR / DGS-3324SRi / DXS- 3326GSR – 2 MB per.
An important point after buying a device D-Link xStackTM DGS/DXS-3300 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link xStackTM DGS/DXS-3300 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link xStackTM DGS/DXS-3300 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link xStackTM DGS/DXS-3300 Series you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link xStackTM DGS/DXS-3300 Series will certainly help you make a decision on the purchase.
If you already are a holder of D-Link xStackTM DGS/DXS-3300 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link xStackTM DGS/DXS-3300 Series.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link xStackTM DGS/DXS-3300 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link xStackTM DGS/DXS-3300 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
