Instruction/ maintenance manual of the product DES-1250G D-Link
Go to page of 28
D-Link™ DES-1250G W eb Smart 48-Port 10/100Mbps+2 -Port Combo 10/100/1000Mbps Copper/SFP(Mini GBIC) Gigabit Switch Manual Second Edition Building Networks for People RECYCLABLE.
Information in this document is subject to change without notice. © 2004 D-Link Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Com puter Corporation is strictly forbidden.
CE Mark W arning This is a Class A product. In a domestic environment, th is product may cause radio in terference in which case the user may be required to take adequate measures. Warnung! Dies ist ein Produkt der Kla sse A. Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen.
About This Guide...................................................................................................................................................................................... 5 Purpose ..........................................
ABOUT THIS GUIDE Congratulations on you r purchase of the Web Smart 48+2G-Port 10 /100/1000Mbps/SFP Switch. This d evice integrates 1000Mbp s Gigabit Ethernet, 100Mbps Fast Ethernet, an d 10Mbps Ethernet network capab ilities in a highly flexib le package.
INTRODUCTION This chapter describes the features of the Web-Smart 48+2G-P o rt 10/100/1000Mbps/ SFP Switch and some background information about Ethernet/Fast Ethernet/Gigab it Eth ernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
VLAN (Virtual Local Area Network) A VLAN is a gro up of end-stati ons that are not const rained by their physical location an d can communi cate as if a common broad c ast domain, a LAN. The primary utility of using VLAN is to reduce late ncy and the need for routers, by us ing faster switching inste ad.
Features 48×10/100M bps Auto-neg otiation Fast Ethernet RJ -45 ports 2×10/100/10 00Mb ps Au to-negotiatio n Gigabit RJ-45 por ts 2×mini-GB IC/SFP ports, share with the 2 gigabit c opper.
UNPACKING AND INSTALLATIO N This chapte r provides unpacking an d installat ion inform ation for the Switch. Unpacking Open the shi pping carto ns of the Swi tch and caref ully unpacks i ts contents .
AC Power The Switch uses a 100-240V AC, 50-60 Hz AC power supply . The powe r switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The Switch’ s pow er supply will adjust to the local power source automaticall y and may be turned on without having a ny or all LAN segment cables connected.
IDENTIFYING EXTER NAL COMP ONENTS This chapter describes the front pane l, rear panel, an d LED indicators of the Switch. Front Panel The figure below shows the front pan els of the Switch.
UNDERSTANDING LED INDI CATO RS The front panel LEDs prov ide in stant status feedback, and he lp monitor and troubleshoot w hen needed. Figure 5. LED indicat o rs of the Swit ch Power and System LEDs POWER: Power Indicator On : When the Power LED lights on, the Switch is receiving power.
On (Amber) When the Amber light is on, the respective port is connected to a 100Mbps Fast Ethernet network. Off : When the respective port is connect ed to a 10Mbps Ethernet or No link.
CONFIGURATION Through the W eb Browser you can configure Switch settings such as VLAN, T runking, QoS… etc. With the attached W eb Management Utility, you can easily discover all W eb Manage ment Switches, assign the IP Address, change th e password, and upgrade new f irm ware .
z Trap IP: Shows the IP where the Trap is to be sen t. z Subnet Mask: Shows t he Subnet Mask set of the device. z Gateway: Shows the Gateway set of the device. Monitor List All the W eb S mart Devices in the Monitor List can be monitored; you can also receive traps and show the status of the device.
The factory default password is "admin." Figure 9. Conf iguration Setting Password Change: Y ou can use this Password Change w hen you need to change the password, fill in the required passwords in the dialog box and pr ess the “Set” button to process the password change immediately .
In the “Option T AB” , there is the R efresh T ime function; this func tion helps you to refresh the time fo r monitoring the device. Choose 15 secs , 30 secs , 1 min , 2 min , and 5 min to select the time for monitoring. In the “Help T AB” , there is About function, it will show out the version of the W eb Management Utility .
Figure 14. Device S tatus Setup Menu When the main page appears, f ind the Setup menu on the left side of the screen (Figure 15). Click on the se tup item that you wa nt to configure.
Figure 16. Port Con figuration T o change the port setting, click on the ID para meter to enter the selected port to configure its Speed/Disable, Flow control, and QoS setting. Figure 17. Speed: This setting has six modes— 1000M Full , 100M Full , 100M Half , 10M Full , 10M Half , Auto , and Disable —for speed or port disable selections.
VID group and press the “Remove the VID” button. T o modify the VID group setting, select the VID group and change the setting, and press the “Apply” button to save the setting s. Figure 18. When you select Port VLAN setting, fill in each port ’ s PVID value between 1 and 4094.
Figure 1. Mirror setting Be sure that the selected trunk setting port connects to the device with a same VLAN group. Device Status Click on the “Status” button to present the device status on this screen, it will show the System S tatus, Port St atus, VLAN S tatus, and T r unk S t atus .
System Setting The System Setting includes the S ystem name, Location na me, Logi n Timeout, IP Address, Subnet Mask, and Gatew ay . Through the W e b Management Utility , you can easily recognize the device by usin g the System Name and the Location Name.
T o restor e a curr ent setting file to the device, you must specify the backup file and press the “Restore” button to process the setting of th e recorded file. Figure 28. Backup Sett ing Note: When r estori ng a r ecor ded file, th e current passwor d will not be erased.
TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Etherne t IEEE 802.3u 100BASE-TX Fast Ether net IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet IEEE 802.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) p rovides this Limited Warranty: • Only to the person or entity that originally purchased the product from D.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMIT TED BY LAW, D-LINK IS NOT LIABLE UN DER ANY CONTRACT, NEGL IGENCE, STRICT LIABILITY OR OTHER LEGAL OR E QUITABLE THEOR Y FOR ANY LOSS OF USE OF TH.
Prod uct Re gis tra tion Register online y our D-Link product at http://support.dlink.com/register/ Product registration is entirely voluntar y and fa ilure to complete or return this form will not diminish your warr anty rights.
International Offices U.S.A 17595 Mt. He rrmann Street Fountain Va lley, CA 92708 TEL: 1-800-326-1688 URL: www .dlink.com Canada 2180 W inston Park Driv e Oakville, O ntario, L 6H 5W1 Canada TEL: 1-905-829 5033 F AX: 1 -905-8295223 URL: www .d link.ca Europe (U.
An important point after buying a device D-Link DES-1250G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DES-1250G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DES-1250G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DES-1250G you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DES-1250G will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DES-1250G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DES-1250G.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DES-1250G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DES-1250G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
