Instruction/ maintenance manual of the product DES-1008E D-Link
Go to page of 26
.
ENGLISH 2 D-Link res erves the right to revise this public ation and to make chang es in the con ten t hereo f without obligat ion to noti fy any person or org aniza tion of such revisions or changes .
ENGLISH 3 T able of C ont ents Pr eface ..................................................................................................... 2 Manual Revisions ........................................................................................ 2 T rademarks .
ENGLISH 4 T o reduce the risk of bodily injury , elec trical shock , re, and damage t o the equipment, obser ve the following pr ecautions. Obser ve and f ollow ser vice mark ings. D o not service an y pr oduct ex cept as explained in your system documentation.
ENGLISH 5 • T ohelp avoiddamaging your system,be surethe voltage selec tionswitch (if provided)on the powersupply is set to match.
ENGLISH 6 Static elec tricity can har m delicate components inside your system. T o prevent static damage, discharge static elec tricity from your body before you touch any of the electronic components, such as the microprocessor . Y ou can do so by periodically touching an unpainted metal sur face on the chassis.
ENGLISH 7 P roduc t O ver view Setup The setup of the DES-1008E can be per formed using the follo wing steps: • Thepow eroutletshouldbewithin1.
ENGLISH 8 Swit ching T echnology Switches provide full-line speed and dedicated bandwidth for all connections. This is in contrast to hubs, which use the traditional shared networking topology , where the connected nodes contend for the same network bandwidth.
ENGLISH 9 F eatur es • The DES-1008Eis ahigh per formance switch designed specically for environments where trac onthe net work andthe numberof users increase continuously .
ENGLISH 10 P ow er I ndicator Thisgr eenindicatorlightisonwhentheDES-1008Eisrec eivingpower;other wise,itiso . Link/Act This LED indicator ligh t is green when the port is connected to an Ethernet device and will blink as Ethernet data is transmitted or r eceived.
ENGLISH 11 Auto MDI/MDI- X Ports: All por ts suppor t automatic MDI/MDI- X crossov er detection. The AutoMDI/MDI- X func tion makes it simple to connect to the switch—just plug either a Crossov er or Straight- Through CA T5 cable into an y por t.
ENGLISH 12 Installation This section will explain how to connect Ethernet devices to y our new D-Link switch and how to mount the switch. Befor e Y ou C onnec t to the Network Thesitewher eyouinstalltheSwit chmaygreatlya ectitsper formance .
ENGLISH 13 Mounting the S witch on the W all The DES -1008E can also be mounted on a wall. T wo mounting slots are provided on the bottom of the switch for this purpose. Please make sure that the front panel is e xposed in order to view the LEDs . Please refer to the illustra tion below: Mounting on a cement w all 1.
ENGLISH 14 C onnec ting the Swit ch PC to DES-1008E A computer can be connec ted to the DES -1008E via a two -pair Category 3, 4, 5 UTP/STP Straight- Through or Crossov er cable. A computer equipped with a RJ-45 10/100Mbps por t can be connected to any of the eight DES-1008E ports.
ENGLISH 15 T roubleshooting 1. Why can´t I shar e my Internet c onnec tion to multiple computers when using m y D -Link DES-1008E switch? If you are connecting directly to a Cabl.
ENGLISH 16 Networking B asics Check y our IP address After you install your new D -Link adapter or if you already have an Ethernet adapter installed on your computer , by default, the TCP/IP settings should be set to obtain an IP address fr om a DHCP ser ver (i.
ENGLISH 17 Sta tically Assign an IP addr ess If you are not using a DHCP capable gatew ay/rout er , or you need to assign a static IP addr ess, please follow the steps belo w : Step 1 W indows® 7 - Click on Start > Contr ol Panel > Network and Int ernet > Network and Sharing C enter > Change A dapter Setting .
ENGLISH 18 Glossar y 1000BASE-LX A shor t laser wavelength on multimode ber optic cable f or a maximum length of 550 meters. 1000BASE-SX Alongwav elengthfora “longhaul” beropticcableforamaximumlengthof10kilometers.
ENGLISH 19 Bandwidth Information capacity , measured in bits per second, that a channel can transmit. The bandwidth of Ether net is 10Mbps, the bandwidth of F ast Ethernet is 100Mbps. Baud Rate The switching speed of a line . Also k nown as line speed.
ENGLISH 20 F ast Ethernet 100Mbps technology based on the Ethernet/CD network access method . Flo w Con trol – (IEEE 802.3x) A means of holding packets back at the transmit port of the connec ted end station. P revents packet loss at a congest ed switch port.
ENGLISH 21 MDI-X Medium Dependent Inter face Cross-over . An Ethernet por t connection where the internal transmit and receiv e lines are crossed. MIB Management Information Base.
ENGLISH 22 Spanning T ree P rotoc ol – (STP) A br idge -based system for providing fault tolerance on networks. STP works by allowing you to implement parallel paths for network trac, and to ensure that r edundant paths are disabled when the main paths are oper ational and enabled if the main paths fail.
ENGLISH 23 T echnical Specications Standards • IEEE802.310BASE- TEthernet • IEEE802.3u100BASE- T XF astEthernet Pr otocol • CSMA/CD Data T ransfer Rate Ethernet:.
ENGLISH 24 Humidity • Operating:10%~90%RH,Non-condensing • Storage:5%~90%RH,Non-condensing Dimensions ( W x H x D): • 165.
ENGLISH 25 C ontac ting T echnical Suppor t U .S. and Canadian customers can contact D -Link technical support through our web site or by phone . Before y ou contact technical suppor t, please have the follo wing ready : • Modelnumberoftheproduct(e.
ENGLISH 26 Pr oduc t registration is entir ely voluntar y and failure to complet e or return this form will not diminish y our warranty r ights. Registr ation V ersion 1.
An important point after buying a device D-Link DES-1008E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DES-1008E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DES-1008E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DES-1008E you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DES-1008E will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DES-1008E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DES-1008E.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DES-1008E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DES-1008E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
