Instruction/ maintenance manual of the product 205 CyClone
Go to page of 8
TRANSPONDER IMMOBILISER USER INSTRUCTIONS CY CL PS VEHICLE SOL UTIONS PROUDL Y AUSTRALIAN.
TRANSPONDER IMMOBILISER Security System CYCLOPS P ARAL YSER 205 User Instructions Congratulations on having one of the world's most advanced and unique Australian designed and engineered vehicle security systems, installed in your vehicle! The Cyclops Paralyser 205 has been tested to and meets Australian Standards 4601:1999.
DISARMING T o disarm the P205, simply switch on the vehicle's engine. The small transponder tag attached to your key chain will come in close proximity to the receiver antenna located below the ignition switch. The P205 will decode the signal from the tag and disarm.
OVERRIDE The system can be overridden by means of a Personal Identification Number (PIN). Every unit is supplied with its own PIN. It is important to make a note of this PIN or keep the card supplied with the unit in a safe p1ace as it also has the PIN detailed on it.
PROBLEM SOL VING System won't disarm (LED won't flash or extinguish) ! Make sure that ignition switch is in the OFF position. ! Make sure the vehicle battery is not flat. ! T ry your spare transponder tag. ! Use PIN to over-ride and contact you nearest Cyclops service centre.
ANNUAL INSPECTION Dynamco prides itself on the durability and integrity of its car security systems. We welcome users to contact a Cyclops service centre every twelve months for an annual inspection.
W ARRANTY Subject to the conditions stated below, to be free from manufacturing defects and faulty material within the warranty period stated below. CONDITIONS ! That the warranty registration has been completed in full at the time of purchase and / or installation and is produced when warranty service is sought.
W ARRANTY REGISTRA TION PURCHASED FROM OWNER’S NAME TYPE OF VEHICLE VEHICLE REGO MODEL OF UNIT DA TE OF INST ALL ’ W ARRANTY PERIOD : AFTER HOURS EMERGENCY PHONE CONTROL MODULE TRANSPONDERS.
An important point after buying a device CyClone 205 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyClone 205 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyClone 205 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyClone 205 you will learn all the available features of the product, as well as information on its operation. The information that you get CyClone 205 will certainly help you make a decision on the purchase.
If you already are a holder of CyClone 205, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyClone 205.
However, one of the most important roles played by the user manual is to help in solving problems with CyClone 205. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyClone 205 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
