Instruction/ maintenance manual of the product RMCARD201 CyberPower Systems
Go to page of 8
Cyber Po w er Netwo rk Management Sy stem 1 Rev.1.2 www.cyberpowersystems.com.
Cyber Po w er Netwo rk Management Sy stem 2 INSTALLATION GUIDE Step 1. Hardware and Tool Installations 1. Connect the Ethernet cable to the LAN port of the CyberPo wer Network Management Card. 2. Connect the CyberPower Network Management Card to the UPS communication port (serial port).
Cyber Po w er Netwo rk Management Sy stem 3 In this section, it will be introducing the “SNMP Card Configuration Tool” program. If a DHCP network service is not available or you want to assign a new IP Address to the SNMP card, please follow the steps listed below: I.
Cyber Po w er Netwo rk Management Sy stem 4 6. First, choose either IP or MA C address from device address option. 7. Then click on each checkbox to modify new IP, new subnet mask or new gateway address from modify option. Last, input the new address on the right for the chosen checkbox.
Cyber Po w er Netwo rk Management Sy stem 5 Figure 6. Web Browser. Note: 1. If your computer has installed firewall software that software may pop up the Windows Security Alert message shown as Figure 7. You need to unblock the“ wsnmpc fg.exe ” program before you run the program.
Cyber Po w er Netwo rk Management Sy stem 6 When the “SNMP Card Configuration Tool” program is unable to use, it can use the Command Line tool instead of the “SNMP Ca rd Configuration Tool” program to setup IP. Please follow the steps listed below: II.
Cyber Po w er Netwo rk Management Sy stem 7 Appendix 1 IP Address Settings of Cybe rPower Network Management Card Overview All devices on a computer network need to have an IP address.
Cyber Po w er Netwo rk Management Sy stem 8 If the response is shown as below, the IP addr ess is already in use by other equipment. Try another IP address until an av ailable address is found.
An important point after buying a device CyberPower Systems RMCARD201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberPower Systems RMCARD201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberPower Systems RMCARD201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberPower Systems RMCARD201 you will learn all the available features of the product, as well as information on its operation. The information that you get CyberPower Systems RMCARD201 will certainly help you make a decision on the purchase.
If you already are a holder of CyberPower Systems RMCARD201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberPower Systems RMCARD201.
However, one of the most important roles played by the user manual is to help in solving problems with CyberPower Systems RMCARD201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberPower Systems RMCARD201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
