Instruction/ maintenance manual of the product CS150U48V3 CyberPower
Go to page of 18
CS150U48V3 Installation & Operation Manual K01-1504801-00.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 1 of 17 TABLE OF CONTENTS 1 Product introduction .............................................................................................................. 3 1.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 2 of 17 TABLE OF TABLES Table 1: Battery Heater Specifications .............................................................................................. 11 Table 2: Block Diagram Descriptions .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 3 of 17 1 PRODUCT INTRODUCTION 1.1 General Description The CS150U48V3 battery backup unit is designed to serve up to two MDU ONTs (Optical Network Terminal for Multi-Dwelling Use) and can be installed indoors or outdoors.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 4 of 17 2.2 Battery Warnings • Danger of explosion if battery is incorrectly connected or replaced. • Worn-out or damaged batteries are considered environmentally unsafe.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 5 of 17 2.4 FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 6 of 17 Figure 1: Dimensions (Front View) Figure 2: Dimensions (Side View) 3 DIMENSIONS 17.14 inch (435.4 mm) 7.09 inch (180.1 mm) 5.79 inch (147.1 mm) 15.75 inch (400.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 7 of 17 Figure 3: Unit Overview (Front) Figure 4: Unit Overview (Rear) Figure 5: Unit Overview (Side) Figure 6: Unit Overview (Bottom) 4 INSTALLATION 4.1 Overview 1.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 8 of 17 4.2 Unpacking Inspect the Battery Backup Unit upon receipt.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 9 of 17 4.4 Installation 4.4.1 Wall Mounting the UPS 1. Remove the UPS from the carton.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 10 of 17 Figure 10: Battery Wiring Secure harness with cable ties Battery Type The battery is a standard sealed lead acid battery rated at 12Vdc / 7.2 (7) Ah. When required, the battery may be replaced with an approved 12Vdc / 7.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 11 of 17 4.7 Connecting to Power Source 4.7.1 Installing the Power Cord 1. Remove the 4 terminal strip cover screws (upper left hand corner) 2. Remove any convenient 3/4” knock-out of the UPS enclosure.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 12 of 17 Wire Gauge (AWG) Wire Type Tightening Torque (lb-in) Minimum temperature rating of conductors Copper conductors 7 75°C 10-18 AWG Copper Conductors Table 3: AC Line Cord Table 4: Conduit Wires 4.
4.8 ONT Alarm Connections 1. Route the 7-wire cable back from the ONT enclosure to the UPS. 2. Remove any convenient 3/4” knock-out of the UPS enclosure. 3. Install a strain relief in the knock-out hole. 4. Route the power cable up through the strain relief.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 14 of 17 Table 5: Controls and LED Indicators Indicator Alarm Silence Button Cold Start Button AC/DC Mode LED .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 15 of 17 Table 6: Alarms 5.3 Alarms There are audible and visual alarm signals to alert the customer to abnormal and/or service affecting conditions present in the UPS.
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 16 of 17 Table 7: Specifications 6 SPECIFICATIONS Model Number CS150U48V3 Input: Rating V oltage/Frequency 100 - 240V / 50 - 60Hz Input V oltage Range 90 - 264V ac Frequency Range 47 - 63Hz P .
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. Page: 17 of 17 APPENDIX I - Wall Mount Chart Recommended Screw Dimensions M8 x 25L or 3/8” x 1”L 7.
An important point after buying a device CyberPower CS150U48V3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberPower CS150U48V3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberPower CS150U48V3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberPower CS150U48V3 you will learn all the available features of the product, as well as information on its operation. The information that you get CyberPower CS150U48V3 will certainly help you make a decision on the purchase.
If you already are a holder of CyberPower CS150U48V3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberPower CS150U48V3.
However, one of the most important roles played by the user manual is to help in solving problems with CyberPower CS150U48V3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberPower CS150U48V3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
