Instruction/ maintenance manual of the product CP900EPFCLCD CyberPower
Go to page of 10
K01-0000190-00 CP900EPFCLCD User’s Manual.
IMPORTANT SAFETY INSTRUCTION S This manual contains import ant safety instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate your UPS.
2.Ensure that the equipment plugged into the battery power-supplied /surge outlets does not exceed the UPS unit's rated capacity (900VA/540W for CP900E PFCLCD). If the rated unit capacities are exceeded, an overl oad condition may occur and cause the UPS unit to shut do wn or the circuit breaker to trip.
Located on the back of the UPS, the circuit breaker serves to provid e over load and fault protection. 10. USB Port to PC This port allows connection and communication from the USB port on the computer to the UPS unit. The UPS communicates its status to the PowerPanel ® Personal Edition software.
CYBERPOWER GREENPOW ER UPS™ TECHNOLOGY CyberPower ’s Green Commitment CyberPower is dedicated to the development of green products, and has adopted Green practices throughout its business, inc.
5. Slide the battery compartment cover completely off of the unit. 6. Remove the batteries from the compartment. 7. Disconnect the battery wires from the batteries. 8. Install the replacement batteries by connecting the red wire (+) and black wire (-) to the same color connectors from the battery pack.
7 5. BA T TERY capacity: This meter displays the approximate charge level (in 20% increments) of the UPS’s internal battery . During a blackout or severe brownout, the UPS switches to battery power , the BA TTERY icon appears, a nd the charge level decreases.
TECHNICAL SPECIFICATIONS Model CP900EPFCLCD Capacity (V A) 900V A/540W Input Frequency Range 47~63Hz (Auto Sensing) A VR Function Y es Output On Battery Output V oltage 230V ac +/-10% On Battery Outpu.
TROUBLESHOOTING Problem Possible Cause Solution Circuit breaker button is projecting from the back of the unit. Circuit breaker has tripped due to an overload. Turn the UPS off and unplug at least one piece of equipment. Wait 10 seconds, reset the circuit breaker by depressing the button, and then turn the UPS on.
10 .
An important point after buying a device CyberPower CP900EPFCLCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberPower CP900EPFCLCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberPower CP900EPFCLCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberPower CP900EPFCLCD you will learn all the available features of the product, as well as information on its operation. The information that you get CyberPower CP900EPFCLCD will certainly help you make a decision on the purchase.
If you already are a holder of CyberPower CP900EPFCLCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberPower CP900EPFCLCD.
However, one of the most important roles played by the user manual is to help in solving problems with CyberPower CP900EPFCLCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberPower CP900EPFCLCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
