Instruction/ maintenance manual of the product ATT36A12V3S CyberPower
Go to page of 11
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 1 of 11 CyberPower ATT36A12V3S (Leave Behind Manual).
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 2 of 11 TABLE OF CONTENTS 1 PRODUCT INTRODUCTION ................. ................... ................... ................... ................... .............. ......3 1.1 G ENERAL D ESCRIPTIO N ...
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 3 of 11 1 PRODUCT INTRODUCTION 1.1 General Description The ONT-BBPSU (Optical Network Terminal Un interruptable Ba ttery Backup Power Supply Unit) is designed to be mounted inside a cus tomer premises and provides power to the ONT.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 4 of 11 2 IMPORTANT SAFE TY NOTES ONLY qualified installation and repair person nel should service this power supply. SAVE THESE INSTRUCTIONS - This m anual contains important instructions for the ATT3612V3S units that should be followed during installation and maintenance.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 5 of 11 Wear protective clothing and eye protect ion w henever installing, mainta ining, servicing, or replacing batteries. If any battery emission contacts the skin, immediately and thoroughly wash with water.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 6 of 11 3 POWER SUPPLY OVERVIEW 3.1 Overview Figure 3: Unit Overview (Front) 1. Control Buttons (Alarm Silence) 2. LED Indic ators (S ystem Status/Battery Powe r/Replace Battery/Auxiliary Power Source) 3.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 7 of 11 4 OPERATION 4.1 Start-Up Make sure that the battery connector is plugged in, the battery is locked into place, and the battery door is closed. Plug the ATT 3612V3S power supply into AC power. The LED o f system status showing green indicates normal mode o f op eration.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 8 of 11 4.4 Auxillary Power Connection Figure 5: Auxiliary Power Connection Connection point for customer-supplied DC input voltage shall be 12Vdc . After depleting the on- board battery capacity, the ATT3612V3S will uti lize power from a valid and present external source.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 9 of 11 5 MAINTENANCE 5.1 Maintenance Mode Maintenance mode de termines remaining useful battery life. If the remaining ba ttery life is determined to be b elow an acceptab le level an d u nable to support proper operation, the Replace Battery LED will be illuminated.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 10 of 11 Figure 8 Battery Type The battery is a standard sealed lead acid battery rated a t 12Vdc / 7.2Ah. When required, the battery may b e replaced with an ap proved 12Vdc / 7 .2Ah battery. Batteries are considered HAZARDOUS W ASTE and must be disposed of properly.
CyberPower ATT3612V3S (Leave Behind Ma nual) Page: 11 of 11 6 SPECIFIC ATIONS T able 4: Specifications.
An important point after buying a device CyberPower ATT36A12V3S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberPower ATT36A12V3S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberPower ATT36A12V3S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberPower ATT36A12V3S you will learn all the available features of the product, as well as information on its operation. The information that you get CyberPower ATT36A12V3S will certainly help you make a decision on the purchase.
If you already are a holder of CyberPower ATT36A12V3S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberPower ATT36A12V3S.
However, one of the most important roles played by the user manual is to help in solving problems with CyberPower ATT36A12V3S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberPower ATT36A12V3S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
