Instruction/ maintenance manual of the product 3300 ICP CyberData
Go to page of 17
Mitel 3300 ICP Configuration Guide for the VoIP Ceiling Speaker CyberData Corporation 2555 Garden Road Monterey, CA 93940 (831) 373-2601.
CyberData Corporation Configuration Guide COPYRIGHT NOTICE: © 2009, CyberData Corporatio n, ALL RIGHTS RESER VED. This manual and related materials are the copyrigh ted property of CyberDat a Corporation.
How-To-Guide Configure the Mitel 3300 ICP for use with the Cyberdata VOIP Indoor Paging Speaker Document # 09-5159-00034 Page 1.
About this document This How-To -Guide is intended for Customer Se rvice and Installation Personnel involved in the installation and maintenance of Mitel 3300 ICPs. NOTICE The information cained in this do cument is believed to be accurate in all respects but is n ot warranted by Mitel Networks Corporation.
Table of Cents Overview ............................................................................................................................................. 4 Software & Hardw are Setup ....................................................
Overview This document provides a reference to Mitel Au thorized Solutions providers for config uring the Mitel 3300 ICP to host the Cyberdata VOIP Indoor Paging Speaker SIP device. The different devices can be configured in various co n fi gurations depending on your VoIP solu tion.
3300 Setup Notes The following steps sho w h ow to pro gram a 3300 ICP to connect with the Cyberdata VOIP Indoor Paging Speaker SIP device. Network Requirements • There must be adequate bandwidth to support the voice over IP. As a guide, the Ethernet bandwidth is approx 8 5 Kb/s per G.
Licensing and Option Sel ection - SIP Licensing Ensure that the 3300 ICP is equipped wi th enough SI P Device licences for the connection of SIP end points.
Multiline IP Set Configuration On the Mitel 3300 ICP, a SIP device can be programmed eithe r in the User Conf iguration fo rm or the Multiline IP Set Configuration form and are program med as a “Generic SIP Phone”. Enterprise Manager can also be used to provision wh ere this application is installed.
Class of Service Assignment The Class of Service Options Assignme nt form is use d to create or edit a Class of Service and specify its options. Classes of Service, identifi ed by Class of Service nu mbe rs, ar e referenced by the Station Service Assignment form for the SIP devices.
Figure 4 – Class of Service As signment (C) Document # 09-5159-00034 Page 9.
SIP Device Capabilities Assignment This form provides configuration options that c an be applied to various types of SIP devices. The association between the SIP device and the form is si m ilar to ho w the Class of Service options work.
Station Service Assignment Use the Station Service Assignment form to assign the previo usly configured Class of Service and SIP Device Capability number to each of the Cyberd ata VOIP Indoor Paging Spe ake r SIP devices in the 3300. This form utilizes Range program m ing.
Multiline Set Key Assignment You use the Multiline Set Key Assignment form to as sign the line type, ring type, and directory number to each line select key of the Cyberdata VO IP Indoor Paging Speaker SIP device. Cyberdata VOIP Indoor Paging Speaker SIP device will su ppo rt up to 1 additional key line appearances.
Cyberdata VOIP Indoor Paging Sp eaker SIP device Setup Notes The following steps show h ow to pro gram the Cyberda ta Indoor Speaker to interconnect with the 3300 ICP. For more detailed configur ation or qu estions about the Cyberdata Indoor Speaker click on the following link: http://www.
Step 4 The speaker will beep once whe n it has booted complete ly. Access the Configuration Portal and click on Speaker Setup. For “Select Speaker Function” cho ose “SIP” and Save Settings.
Step 5 Click “SIP Setup”. For “SIP server” and “Outbound Proxy” enter the IP address of the 3300. Enter 5060 for “Remote SIP port” and “Local SIP Port”. Enter the SIP User ID Authenticate ID as the extension program m e d in the 3300.
An important point after buying a device CyberData 3300 ICP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberData 3300 ICP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberData 3300 ICP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberData 3300 ICP you will learn all the available features of the product, as well as information on its operation. The information that you get CyberData 3300 ICP will certainly help you make a decision on the purchase.
If you already are a holder of CyberData 3300 ICP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberData 3300 ICP.
However, one of the most important roles played by the user manual is to help in solving problems with CyberData 3300 ICP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberData 3300 ICP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
